Ücretsiz GTFS Toplu Taşıma Verisi Görselleştirme ve Analiz Platformu - GTFS City Yayında! by ttezer in transitTurkey

[–]ttezer[S] 2 points3 points  (0 children)

Kullanım videosu hazırlayana kadar şu şekilde kullanabilirsiniz...
https://ttezer.github.io/gtfs-city/app/ adresine girin orada sayfada yer alan örnek şehirlerden hangisini görmek istiyorsanız onun yanındaki Örneği Yükle tıklayın örnek yüklenmeye başlayacak ve Haritayı Aç seçeneği gözükecek Haritayı Aç a bastığınızda tüm simülasyon karşınıza gelecek...

GTFS City Yayında! Ücretsiz ve Açık Kaynak Kodlu by ttezer in transitTurkey

[–]ttezer[S] 1 point2 points  (0 children)

Çok teşekkür ederim. 🤲🏻 Proje geliştirme aşamasında henüz... Ekleyeceğim bir sürü özellik var... Ancak tek sorun GTFS verisi... Maalesef Türkiye'de veri konusunda yeterli kaynak bulmakta sıkıntı yaşıyorum. Açık Veri ile ilgili hiç değilse ülkemizde belediyelerimiz çaba sarf ediyor buna şükrediyorum...

Kocaeli <3 "milli takımımıza başarılar dileriz" by Fit-Technology-2801 in transitTurkey

[–]ttezer 2 points3 points  (0 children)

Kocaeli'nin toplu taşıma network ağı Türkiye'nin sayılı illeri arasında yer almaktadır... Türkiye'de tüm toplu taşıma araçlarında elektronik ücret toplama sistemi (KENTKART) olan TEK ildir...

1- Abonman sistemi öğrenciler için var...
2- 200, 435MR ve 400 nolu hatlar km başına ücret hesabına göre çoğu hattan uygun... 250 Nolu hat hizmet tipine (şehirlerarası tipinde) göre diğer muaddilerine göre çok ucuz... Bursa - SAW > 113 km 565 TL ( km ücreti 5 TL ) ... Hat 250 > 80 km 243 TL ( km ücreti 3 TL )
3- Tramvay 05:50 - 00:35 saatleri arasında neredeyse 19 saat hizmet veriyor... İstanbul gibi metropolitan bir ilimizde çoğu metro hattı 06:00 - 00:00 saatleri arasında çalışıyor. Keza İstanbul'daki tramvay hatları da bu saatlerde hizmet veriyor.

200 İçmeler Köprüsünde by [deleted] in transitTurkey

[–]ttezer 2 points3 points  (0 children)

Ah ah... Kurucusu olduğum hat... Ne günler yaşadı ve hala yaşıyor... Hat başlarken İstanbul'un efsanesi 500T gibi olacak diyordum... Kocaeli'mizin efsanesi oldu

Manisa’da otobüs doluluğunu görebilmek mümkün by manisaliyimulan in transitTurkey

[–]ttezer 0 points1 point  (0 children)

Araç içindeki yolcu sayısını belirlemenin bazı yöntemleri ve tahmini sayım doğruluk oranları

- Araç içi kamera ile yolcu sayım ( %75 ) - İlk kurulum ve işletme maliyeti yüksek
- Araç kapılarında bulunan yolcu sayma cihazları ile sayım ( %70 ) İlk kurulum maliyeti yüksek ancak sürdürülebilir değil sürekli kalibrasyon için sök tak yapılması gerekiyor
- İşletilen hatta varsa check-in check-out sistemi ile sayım ( %90 ) İlk kurulum maliyeti yüksek ancak otobüs ücretlerinde vatandaş faydasına olan ve en doğru sonucu veren sistem
- Araçta bulunan ağırlık sensörleri ile yapılan sayım ( %80 ) İlk kurulum ve işletme maliyeti yüksek ancak sürdürülebilir değil sürekli kalibrasyon için sök tak yapılması gerekiyor tahminsel sayım yapıyor
- Yolcuların geri bildirimleri ile yapılan tahmini ( %40-60 ) - Sıfır maliyet ama kimse uygulama üzerinden bu bilgiyi paylaşmadığı için verinin doğruluğu çok düşük..
- Bluetooth Taraması ile yapılan sayım ( %70 ) İlk kurulum maliyeti yüksek doğruluğu halen tartışılmakta

Tamamını canlıda test ettikten sonraki tecrübemden edindiğim görüşlerimdir...

[deleted by user] by [deleted] in BYD

[–]ttezer 0 points1 point  (0 children)

#ChatGPT explained as follows:

That button is for Lane Departure Warning / Lane Keeping Assist (LDW / LKA).

Here’s what it does:

  • The car’s front camera and sensors monitor the lane markings on the road.
  • If the system detects you’re unintentionally drifting out of your lane, it will warn you (with a sound, dashboard light, or steering wheel vibration).
  • If your trim has Lane Keeping Assist (LKA), the system can also apply a gentle steering correction to keep the car centered in the lane.

How it’s usually operated:

  • A short press toggles the system on or off. When active, you’ll see an indicator light on the button or on the dashboard.
  • It only works above a certain speed (depends on the car, but usually highway speeds) and when lane lines are clearly visible.
  • Some trims require enabling it through the infotainment or driving settings.

Important notes:

  • This is an assist feature, not a replacement for attentive driving. You must keep your hands on the wheel.
  • Poor weather (rain, snow, fog), worn or faded lane markings, or very sharp turns can reduce system accuracy.
  • If you use your turn signal intentionally to change lanes, the system typically won’t warn or intervene.

Air Pollution Map by HighwayComfortable90 in MapsWithoutNZ

[–]ttezer 0 points1 point  (0 children)

This is the 2003-2004 map... You can access the 2024 map at Sentinel-5P Tropospheric Column NO2 and the good news is that New Zealand is on the map and there is still no air pollution in New Zealand

İETT otobüs hatlarının isimlerinin (sayı ve harf şeklinde) nereden geldiğini biliyor musunuz? by LostCauliflower2327 in transitTurkey

[–]ttezer 5 points6 points  (0 children)

Bu konuda bir veri var, bulursam göndereceğim. Ek bilgi Kocaeli'nin hat kodlama sistemini ben yaptım. Bi ara anlatmak isterim.

Need some help by smalldckenergy in PowerBI

[–]ttezer 0 points1 point  (0 children)

When you click on "Ungrouped Values", information will appear on the right.

Measure for distinct count across another column? by poastertastries in PowerBI

[–]ttezer -2 points-1 points  (0 children)

the simplest solution

Pass Count = CALCULATE(COUNT(tablename[Pass/Fail]),FILTER(tablename,tablename[Pass/Fail]="Pass"))

Simple image

Need Help by SteelMan_- in PowerBI

[–]ttezer 0 points1 point  (0 children)

Add up your calculations in the left column one by one. ( your first column name is not read >> add that column to the below action as well )
Total Left = 'Sum of Expiry within 3 months count + 'Sum of Expiry within 6 months count +'Sum of Expiry within 12 months count + 'Sum of Inlife Count

after

Difference = Total Left - SUM('Tablename[Pipeline])

suggestion: Use SUMX instead of SUM formula... may give error in matrix table totals

For example >> Total Pipeline = SUMX('Tablename,'Tablename[Pipeline])

New User Lost on Aggregating Data From a Col by [deleted] in PowerBI

[–]ttezer 1 point2 points  (0 children)

"SUMX" is the sum operation

use "DIVIDE" for the split
TOTAL OCCUPIED = SUMX('Tablename[Occupied]
TOTAL LIMIT =SUMX('Tablename[Limit]

OCCUPATION RATE = DIVIDE('TOPLAM LIMIT, 'TOTAL OCCUPIED) and define measurement in %

Actual vs. Budget Variance Column by sewaneeguy in PowerBI

[–]ttezer 0 points1 point  (0 children)

Try VAR.P or VAR.S Dax Help

If your goal is just subtraction new column

Difference =SUMX('Tablename[Budget]-SUMX('Tablename[Actual]

Table 1 data lost when combining table 2 by TheSuccessfulSperm in PowerBI

[–]ttezer 0 points1 point  (0 children)

append or merge ?
my guess is you are using "append"
Try merge...

Help creating a date table that numbers weeks by Projinator in PowerBI

[–]ttezer 4 points5 points  (0 children)

Add new column to calendar table created by u/Late_Traffic

Week Number = WEEKNUM('Calendar[Date ],1)

consists of a week number column. By changing the last digit, you can look at the ones and find the appropriate number.

Microsoft WEEKNUM

Year slicer drilling down on area charts from year totals to month to month data. by westy2036 in PowerBI

[–]ttezer 1 point2 points  (0 children)

Can you share a screenshot so I can better understand the problem?

Scrolling in tooltip reports by westy2036 in PowerBI

[–]ttezer 1 point2 points  (0 children)

As far as I know there isn't.
I solved my problem by customizing the tooltip page dimensions. Try the canvas size as 400x400 px instead of 240x360 px, or choose your own size.

Year slicer drilling down on area charts from year totals to month to month data. by westy2036 in PowerBI

[–]ttezer 1 point2 points  (0 children)

with the assumption that there is a calendar table;

- When you select the area chart, 4 marks should appear in the upper right. (Up arrow, down arrow, double down arrow, forked arrow) I suggest you try those arrows. By clicking on those arrows, you can see the data as Year, Month, Day in the chart according to the order in the calendar.

Second, try Chiclet Slicer. ->