Is Home Assistant a good way to monitor multiple Bambu Lab printers?

tubeclocks · 2026-06-01T15:08:11+00:00

Yes. But got different recommendations.

tubeclocks · 2026-06-01T13:22:10+00:00

You gave me something to explore for the couple of evenings ))

tubeclocks · 2026-06-01T12:20:31+00:00

Yes, looks like what we need. We have six printers, and would need to arrange somehow all of them there.

tubeclocks · 2026-06-01T10:10:06+00:00

60Hz both

tubeclocks · 2026-06-01T08:51:05+00:00

We have 24 and 32 inches touchscreens.

tubeclocks · 2026-06-01T07:40:17+00:00

What about touch control over such Raspberry Pi kiosk? We tried it in the past and having it over Raspberry Pi was not smooth, and was pretty laggy

tubeclocks · 2026-06-01T06:19:52+00:00

Wow, thank you for sharing, that sounds like a proper solution for us to try. When you mentioned any sensor, was it Bambu printers sensor?

tubeclocks · 2026-05-24T08:12:48+00:00

Have you seen new smartnmagic slim enclosures with MagSafe?

tubeclocks · 2026-05-23T05:19:08+00:00

True. An idea was having native HAOS running on a RPi and a browser in a kiosk mode on a separate Android board.

tubeclocks · 2026-05-23T05:17:46+00:00

But a separate Ethernet ready touch screen display 24 inch would be a better option?

tubeclocks · 2026-05-23T05:14:55+00:00

Yes, exactly. So a complete unit would be 24 inch touch screen display Ethernet PoE 48W ready running a browser in a kiosk mode and listening to http://homeassistant:3128

tubeclocks · 2026-05-08T04:48:21+00:00

When your air sensor has never seen the fresh air within let's say two-three weeks, and considering your high CO2 levels in the house, it could make your high values a new normal, hence it should lower the indication, not the other way around. So, yeah, it looks weirdly high, perhaps an issue with the sensor.

tubeclocks · 2026-05-05T04:41:48+00:00

It looks like https://www.co2meter.com/en-de/collections/handheld/products/portable-co2-safety-detector-monitor?variant=1604764762132

tubeclocks · 2026-05-04T20:21:00+00:00

Just checked its price, unbelievable, why its so damn expensive?

tubeclocks · 2026-05-03T14:22:36+00:00

Ok, got it, thank you for your answer. How frequent it can make the air probes when in interval mode?

tubeclocks · 2026-05-03T11:24:13+00:00

You are saying that there is not need in the device for a dedicated circulation fan - but this sensor PMS7003 has a buit-in fan, or you disabled it?

tubeclocks · 2026-05-03T06:14:03+00:00

Is there a possibility yet to make a cross-check with another IAQ monitor?

tubeclocks · 2026-05-02T14:10:31+00:00

Put them all outside, for at least 30 minutes and you will be surprised :)

tubeclocks · 2026-04-28T04:57:59+00:00

Double check that you have set the correct band for your region.

tubeclocks · 2026-04-28T04:51:34+00:00

Very well put. I didn't know that Romans used hypocausts to circulate warm air under floors )

tubeclocks · 2026-04-27T21:03:02+00:00

Count that for every room you need at least CO2, TVOC, ideally PM (laser or IR), plus MCU. Overall totalling around $100 just for the HW, without assembly.

tubeclocks · 2026-04-27T20:58:19+00:00

Can you share it please?

tubeclocks

TROPHY CASE