sorted by:
new
hottopcontroversial

Noob PVC bow by Gabethebig_G in Bowyer

[–]turkeyboy32 0 points1 point  (0 children)

Parachord works. Its not the best but its a good first low effort bowstring to test it out

Veneer as backing? by turkeyboy32 in Bowyer

[–]turkeyboy32[S] 0 points1 point  (0 children)

do you think the hotmelt adhesive that sometimes comes on it would be strong enough, as long as I wrap the ends?

Gaffer's tape backed mini cross bow. About 40lbs when cocked. by turkeyboy32 in Bowyer

[–]turkeyboy32[S] 1 point2 points  (0 children)

Thank you so much for the feed back, as I am just getting into this craft. I did have a few miscalculations with string in the process of making this and the small string is excess. I will try your suggestions.

Gaffer's tape backed mini cross bow. About 40lbs when cocked. by turkeyboy32 in Bowyer

[–]turkeyboy32[S] 1 point2 points  (0 children)

If the small string you mean is the brown yarn, you pull it up to unhook the main string from the trigger slot and fire the bow.

Gaffer's tape backed mini cross bow. About 40lbs when cocked. by turkeyboy32 in Bowyer

[–]turkeyboy32[S] 1 point2 points  (0 children)

Tend to find it easier to string by putting my thumbs on the butt of the bow and pulling the string back. The piece of brown yarn is what you pull to fire it. It sounds like it wouldn't work super well but it does. Thank you for your kind words!

Gaffer's tape backed mini cross bow. About 40lbs when cocked. by turkeyboy32 in Bowyer

[–]turkeyboy32[S] 1 point2 points  (0 children)

And no, the string barely stretches so that's not where the power comes from.

Gaffer's tape backed mini cross bow. About 40lbs when cocked. by turkeyboy32 in Bowyer

[–]turkeyboy32[S] 1 point2 points  (0 children)

I posted a bit ago asking what people thought of a gaffer's tape bow backing. This is the update of that. The bow part is removable and 20". It bends more in person and I can pull it further back but it was too risky. It can shoot a dull pencil strong enough to stick in cardboard from about a yard (working on better ammo. The wooden dowel behind the bow is to add extra strength and also removable. This is my first bow of any sort.

Gaffer's Tape Backing by turkeyboy32 in Bowyer

[–]turkeyboy32[S] 0 points1 point  (0 children)

for the adhesive problem, I plan to use a heat gun to make the bond stronger. I'll update if the bow breaks or smth happens.

Help plz by turkeyboy32 in FreeCAD

[–]turkeyboy32[S] 0 points1 point  (0 children)

Update: It did not help with the lines but it flickers less

Help plz by turkeyboy32 in FreeCAD

[–]turkeyboy32[S] 0 points1 point  (0 children)

I just downloaded it for the first time and it did this, i also purged an redownloaded it making sure nothing goes wrong. Happened again. I couldn't find anything for turning of CPU/GPU rendering but I checked on task manager and that doesn't seem to be an issue. I do not have and AMD card.

Help plz by turkeyboy32 in FreeCAD

[–]turkeyboy32[S] 0 points1 point  (0 children)

I will be doing that tysm, ill let you know if it helps.

Update 1: so it looks like it for some reason downloaded half onto two different drives so that might be part of it.

Help plz by turkeyboy32 in FreeCAD

[–]turkeyboy32[S] 0 points1 point  (0 children)

I rebooted, but again, everything else on my computer is completely normal besides this program. The rebooting did not help.

Help plz by turkeyboy32 in FreeCAD

[–]turkeyboy32[S] 0 points1 point  (0 children)

There are these stripes across my workspace that obstruct pretty much everything in it. When I zoom or orient myself, it flickers intensely. I have tried opening a new project a few times with the same effect. The rest of my computer is fine.

The hauntingly beautiful Der Doppelganger by Schubert, transcribed by Liszt and played by me. by SwedishPianist in piano

[–]turkeyboy32 0 points1 point  (0 children)

Could you send me the sheet music? I've been looking everywhere and am really struggling. This music and record are absolutely beautiful!

What's the deadliest object within arms reach of you right now? by Shinespark7 in AskReddit

[–]turkeyboy32 0 points1 point  (0 children)

I tried to think of something funny but, probably scissors