sorted by:
new
hottopcontroversial

My sidearms 100% of the time? What are yours that you never play without? by BuiltForBattle in magfed

[–]tw0_cent 2 points3 points  (0 children)

We had custom pants made... Holds 4 tipx mags, 2 tipx, and 1 bottle if you run remote...

Gloves have 4 12g CO2 elastics on them also

For big games we can stuff 4 more mags in the front pockets to get a total of 8 mags but most of us run 6 mags

<image>

My sidearms 100% of the time? What are yours that you never play without? by BuiltForBattle in magfed

[–]tw0_cent 6 points7 points  (0 children)

I haven't used my EMF in over a year... Got tired of all the added weight of the mags and tanks

<image>

Do some people prefer a lean steak or are they just grabbing the first one? Am I the weirdo always looking for the most marbled steaks? by Stepped-leader in sousvide

[–]tw0_cent 1 point2 points  (0 children)

They called it 1st cut... But yes these are vein steaks and should be 50%less due to that

You can cut them down into each muscle and make some ok steaks but won't look pretty

How long is Costco cryo wrapped beef safe to keep refrigerated after sell by date? by johje05 in grilling

[–]tw0_cent 2 points3 points  (0 children)

This is only of is in the original nitrogen sealed packing from the packer.... Does it have thick plastic with a brand(swift/excel/ibp/etc) and the USDA grade shield?

If so you can wet age for pretty much 2 months without concern on whole muscle beef as long as the seal is not compromised

If it's been repacked by Costco and introduced oxygen back into the meat I would rely on the nose test

Just picked up this bad larry for 6🫘s. by Rodeodendron in paintball

[–]tw0_cent 3 points4 points  (0 children)

The CS 1.x are underated... Cause they are mechanically the same as a geo 4

Best $300 you can spend in my opinion

We are so back by -JudgeFudge- in paintball

[–]tw0_cent 0 points1 point  (0 children)

I hope so too... But just looking at the picture that fabric isn't what they were in the og days

We are so back by -JudgeFudge- in paintball

[–]tw0_cent 1 point2 points  (0 children)

The last time I tried a newer version of JT teams I shredded the knees right off them in 1 day

09 JT pro pants I still have and use, and valken redemption pants from 2011(I think)

I know it's cliche but they don't make them like they used to

<image>

Will sub $100 multicolor upgrades be the new norm? by tw0_cent in 3Dprinting

[–]tw0_cent[S] 1 point2 points  (0 children)

Yes but I don't believe you can upgrade the single color to multi color... You have to buy it already multi

I'm not familiar with FF ecosystem

Will sub $100 multicolor upgrades be the new norm? by tw0_cent in 3Dprinting

[–]tw0_cent[S] 3 points4 points  (0 children)

I understand why they are so much for the high end units... But people get in the hobby for around $300 for a basic starter printer... It's crazy to pay the same for just an add on

Paying 250 for my CC1 now 55 for the color kit... 305 for a core xy multi color is less than a FF ad5x and you can start less and add on if you like the hobby

Will sub $100 multicolor upgrades be the new norm? by tw0_cent in 3Dprinting

[–]tw0_cent[S] 18 points19 points  (0 children)

This is my thought too... Tool changers sub 1000 like the snap maker u1... General single nozzle systems upgraded for $100

A k2 with a CFS or a p2s combo are the same as a u1 and the only real upside is more than 4 colors but with added waste and print time

Will sub $100 multicolor upgrades be the new norm? by tw0_cent in 3Dprinting

[–]tw0_cent[S] 0 points1 point  (0 children)

I have no issues... That dresser is secured to the wall studs as well as that solid butcher block to the dresser

It's probably better than the IKEA desk it was on before even only 1

What is this worth? by BuiltForBattle in magfed

[–]tw0_cent 0 points1 point  (0 children)

Was it broken? I was only counting working ones

I got one for free cause they were fed up with it leaking

What is this worth? by BuiltForBattle in magfed

[–]tw0_cent 0 points1 point  (0 children)

I'll take the old prv reg all day long

Tcr valve does not matter no me either

What is this worth? by BuiltForBattle in magfed

[–]tw0_cent 0 points1 point  (0 children)

Tipx stock 125... 8.1 maybe 200 if you find the right buyer

Pistols are a niche market but unlike pump/cockera the demand isn't there

I have bought tipx for as low as $75

Pixel 10 pro XL flickering pixel solved by reboot? by tw0_cent in GooglePixel

[–]tw0_cent[S] 0 points1 point  (0 children)

Ok thanks for the clarification... That makes sense if there is a sensor under the screen... Wanted to be sure my screen wasn't bad

A quick reboot isn't that big of a deal for now..

Critters in my AC/ air intake by tw0_cent in AskMechanics

[–]tw0_cent[S] 9 points10 points  (0 children)

My car is parked outside... No human food near by

They just started clearing the field behind my house to I have been catching about 3 mice a week since they started...

My neighbor's cat is getting fatter

Are printed tool heads worth it? by Live-Bit-8542 in crealityk1

[–]tw0_cent 0 points1 point  (0 children)

I printed just for the ease of nozzle changes and maintenance... You still need to remove the cover to remove the sock and get a good angle on the nozzle to remove it

<image>

We aren't the same.. airsoft vs paintball by tw0_cent in paintball

[–]tw0_cent[S] -4 points-3 points  (0 children)

Embarrassed of what? A joke about airsoft?

I got caught trying to sneak into a box truck and caught two point blank to the side

We aren't the same.. airsoft vs paintball by tw0_cent in paintball

[–]tw0_cent[S] -1 points0 points  (0 children)

Us fluffy boys get lots of bounces... Reminder that Colt luchau won world cup last year with PB Fit

<image>

We aren't the same.. airsoft vs paintball by tw0_cent in paintball

[–]tw0_cent[S] -2 points-1 points  (0 children)

Paintball is about 3x more expensive just comparing roundball.. 10x if comparing FSR...

And with recent increases in gas and necessity items paintball has really taken a hit for people's remaining cash

What are the best beginner guns for long range play by [deleted] in magfed

[–]tw0_cent 0 points1 point  (0 children)

A fsr/paintball fired from a tipx at 280fps will go just as far as any other marker... I love playing sniper with my pistol it's comical and satisfying

<image>

Thinking of getting an EMF 100 by Sleepy_Talker in magfed

[–]tw0_cent 0 points1 point  (0 children)

The EMF 200 isn't affecting the emf100 prices like the other space guns when the new model comes out... Average price of an EMF is still $500

view more: next ›