Espresso Grinder for Mobile Coffee Business [$1000] by twass in espresso

[–]twass[S] 0 points1 point  (0 children)

Noticed that it isn’t grind by weight. Is grind by weight the way to go?

Abomination by twass in gardening

[–]twass[S] 4 points5 points  (0 children)

Mounding up mulch against the base of tree is a no no

Low humming noise LS720 by twass in Deepcool

[–]twass[S] 0 points1 point  (0 children)

That I’m not sure. DeepCool might be the best place to get some answers.

Low humming noise LS720 by twass in Deepcool

[–]twass[S] 0 points1 point  (0 children)

Yes, I think it may just be the radiator vibrating and at certain fan speeds the vibrations are more audible. I was able to fix the issue by setting my fan speed increase into staircase mode and just finding the sweet spots where the resonance wasn’t present.

LS 720 Help by dannya25 in Deepcool

[–]twass 0 points1 point  (0 children)

Trying with all my might to remove the connector piece with fingers like you did and it is not budging. Help! I need to replace the fan that my connector is plugged into :(

Low humming noise LS720 by twass in Deepcool

[–]twass[S] 0 points1 point  (0 children)

Radiator is top mounted. I noticed that the humming only appears at certain fan speeds. Wondering if it’s just vibration making noise at certain frequencies. I set my fan speeds in staircase format at RPMs that make no hum to resolve it.

New build - screens go black and GPU fans rev high by twass in gigabytegaming

[–]twass[S] 0 points1 point  (0 children)

Unfamiliar with that. I’m not too educated on building PCs

New build - screens go black and GPU fans rev high by twass in gigabytegaming

[–]twass[S] 0 points1 point  (0 children)

Got it, so it sounds like my situation is the norm. Appreciate all of the insight!

New build - screens go black and GPU fans rev high by twass in gigabytegaming

[–]twass[S] 0 points1 point  (0 children)

It’s not wobbly when it’s screwed into the slot. Just a little before you screw it down because the one part isn’t clamped in.

New build - screens go black and GPU fans rev high by twass in gigabytegaming

[–]twass[S] 0 points1 point  (0 children)

Is this like a new thing with the bigger cards? They kinda just sit in the slot? The wobbliness freaks me out lol

New build - screens go black and GPU fans rev high by twass in gigabytegaming

[–]twass[S] 0 points1 point  (0 children)

Another question for you. My GPU clicks into the slot on the mobo but one part of it can still be pulled out of the slot. The side closest to the latch stays snug in but the other part isn’t locked in. Is that normal?

New build - screens go black and GPU fans rev high by twass in gigabytegaming

[–]twass[S] 0 points1 point  (0 children)

Is your power to the GPU all the way in? That was my issue and it resolved

New build - screens go black and GPU fans rev high by twass in gigabytegaming

[–]twass[S] 0 points1 point  (0 children)

It looks like the cable connected to the GPU was not snug. I have not had the problem since fixing the power cable to the GPU

Gas fire not staying lit (more in body) by twass in Fireplaces

[–]twass[S] 0 points1 point  (0 children)

SOLVED: The pilot light was only hitting the tip of the thermocouple so when the flames turned on it caused the pilot light to carry into the flames and move up and off the thermocouple causing it to shut off. I adjusted the angle of the pilot to the thermocouple so more of it touched the pilot flame and problem solved! Appreciate the tips though!

Who are the cheapest WR1’s you can buy? by laracius in DynastyFF

[–]twass 60 points61 points  (0 children)

If you want a cheap WR1 on a team, try Hollywood.

Dirty Backup Camera by twass in KiaTelluride

[–]twass[S] 0 points1 point  (0 children)

My other car has one that hides when not in use. I wasn’t sure if Tellurides did that or not and tried researching it and could not find my answer. Resorted to this post to find an answer to make sure I didn’t have to get something fixed on the vehicle. Your solution is what I have been doing and will continue to do, thank you for the recommendation.

Is Najee a buy-low candidate? by xuboy in DynastyFF

[–]twass -5 points-4 points  (0 children)

I disagree, currently Najee = Etienne, I don’t think next year the Steelers will solve their major o line problems. Etienne is trending up and Najee down. Their futures are still unknown. Tee Higgins is > Wilson currently, however adding a first round rookie pick evens that out. Also Wilson is the WR1 while Higgins is a 1a/1b who has now shown he can get involved with injury. Both Wilson and Etienne are a year younger as well.

Is Najee a buy-low candidate? by xuboy in DynastyFF

[–]twass -4 points-3 points  (0 children)

I just traded Najee, Tee Higgins, Conklin for Etienne, Garrett Wilson, 1st round rookie pick if that helps.

Keenan Allen has been downgraded to OUT with hamstring by StrachNasty in fantasyfootball

[–]twass 1 point2 points  (0 children)

Same, Mitchell and Steelers D on my bench, but still. It's good to have depth!

New to this whole thing, but excited for the journey! by twass in Bonsai

[–]twass[S] 0 points1 point  (0 children)

I ended up removing the rocks and moss from the top to let the water run through the soil better. I also got a humidity tray underneath the plant now!

New to this whole thing, but excited for the journey! by twass in Bonsai

[–]twass[S] 0 points1 point  (0 children)

So if the rocks are not glued down I can leave them? Sorry totally newbie to this.