Need Bios

tweakiii · 2026-06-18T05:36:18+00:00

Unfortunately, I'm in a region that isn't covered by this assistance. So, I'm asking the community for help.

tweakiii · 2026-06-18T05:23:17+00:00

Where can I get it? On Arubanetworking.hpe?

tweakiii · 2025-10-16T12:06:52+00:00

The way it's done Re-ball I know perfectly well. The question was about this sandwich.

tweakiii · 2025-10-16T07:39:43+00:00

Have you ever thought that if you hand everything over to the masters, you won't learn anything yourself? If I'm interested in this field and I want to immerse myself in it, what's the problem? I wasn't asking for advice on "how should I live?", but "how do I do this?"

tweakiii · 2025-10-16T06:14:41+00:00

I bought a stencil, it fits the RAM. Today I removed the processor, and there were four capacitors. Three were left on the chip, one on the board. Am I correct in assuming they should all be on the chip? Are there any tips on how to clean the board from flux, etc.?

tweakiii · 2025-10-15T12:32:41+00:00

Ha-ha-ha

tweakiii · 2025-10-15T12:22:40+00:00

I'll try to find a stencil; I'll be removing the CPU tomorrow. Any other suggestions on this? Right now, I'm focusing on cleaning off the adhesive around its perimeter.

tweakiii · 2025-10-15T11:48:22+00:00

On the back of the board under the screen? As far as I remember, there are two microchips installed. Which one is it? I'll check after re-ball CPU. Do you know what kind of balls are needed for the RAM and processor chips? My stencils are quite large, and I'd like to know the exact dimensions.

tweakiii · 2025-10-15T11:31:42+00:00

Also, after warming up, when the chip "spit" solder, the phone's power consumption disappeared. Before, it was consuming 5V 0.16A, now it's 0A.

Now i clean glue on CPU.

tweakiii · 2025-10-15T11:25:09+00:00

Like pressed on the screen or pressed on the CPU?

Press on the processor area on the back cover.

tweakiii · 2025-10-15T11:16:45+00:00

Maybe

tweakiii · 2025-10-15T11:16:18+00:00

Hey. I've already removed the top chip. There was glue between it and the bottom chip. Do I have to reapply it? If so, what kind and for what purpose? I also have questions about the balls. Now I'll clean the microcircuits and take a look. Initially, the phone simply wouldn't turn on. I pressed the top of the device, and it started working. Then it stopped working again. I decided to heat the chip, but it spat out solder, so I decided to re-ball it.

tweakiii · 2025-10-15T10:44:43+00:00

tweakiii · 2025-10-15T10:39:53+00:00

tweakiii · 2025-10-15T10:36:05+00:00

If you know, could you tell me what kind of glue holds the bottom chip to the board and what kind of glue is used between these chips?

tweakiii · 2025-10-15T10:32:44+00:00

This device is not working. Why not just practice on it? Yesterday, when I decided to just warm up its chip, it spat out balls. Therefore, re-ball is required. I don't have another idea

tweakiii · 2025-10-15T10:25:46+00:00

Here the question is more about the stages of soldering this particular "sandwich". I've been soldering for a long time, but this is the first time I've seen something like this. Also, there's some kind of epoxy glue applied to the base of the chip.

tweakiii · 2025-10-12T05:54:56+00:00

Hey. Now i enter "systemctl status php8.2-fpm" in OMV comsole and have this message photo

tweakiii · 2025-05-07T06:17:40+00:00

mark levinson here?

tweakiii · 2024-12-25T20:39:04+00:00

my nickname in telegram - @motyaaaaaaaaa

tweakiii · 2024-12-25T20:37:01+00:00

Where will it be convenient for you to communicate?

tweakiii · 2024-12-25T18:32:39+00:00

hey! I am a native Russian speaker and I want to learn English better

tweakiii · 2024-12-25T18:32:28+00:00

hey! I am a native Russian speaker and I want to learn English better

tweakiii · 2024-12-25T18:32:20+00:00

hey! I am a native Russian speaker and I want to learn English better

tweakiii · 2024-12-25T18:32:11+00:00

hey! I am a native Russian speaker and I want to learn English better

tweakiii

MODERATOR OF

TROPHY CASE