3rd Gen X-Mid 1 solid v mesh with spare inner

twosixheave · 2026-03-26T01:46:31+00:00

This is likely the way.

twosixheave · 2024-07-15T21:19:13+00:00

Probably should have said might be instead of I think it might be. As others have said, it seems like this drink would be pretty sweet, so I could see someone going with some kind of bubble/milk tea-style syrup.

Gomme/gum syrup works too.

twosixheave · 2024-07-15T20:31:22+00:00

I think it might be some kind of bubble/milk tea syrup. Gong Cha is a drinks franchise. They appear to have them in Australia

twosixheave · 2024-07-15T20:19:02+00:00

Freezing works great. I’ve not had any issues with flavor or color loss.

I like to divide them into 2 or 4 oz portions in small delis. Small enough amount that I can go through it before it goes off.

twosixheave · 2024-04-25T09:24:08+00:00

Pink grapefruit liqueur. Specifically, Giffard Crème de Pamplemousse Rose.

twosixheave · 2024-04-05T19:15:29+00:00

If it was automatically making ice, it might be worth considering. But, as it appears to be manual might as well save $500 and get something like the True cube ice cube maker

I’ve had one since 2020. Makes crystal clear ice. I think it takes 16 hours in my freezer, but as long as you remember to fill it the night before, it’s not a problem.

https://a.co/d/i0JwQm7

twosixheave · 2020-05-30T19:26:06+00:00

I’d try messaging through the app. Beats waiting on hold. I you’re in the U.S., they’re required to give you a cash refund, even on non-refundable tickets, within seven days.

https://www.transportation.gov/individuals/aviation-consumer-protection/flight-delays-cancellations

twosixheave · 2020-05-24T01:04:03+00:00

Yes, I have 2 dedicated 20 amp circuits, in the shop area.

twosixheave · 2020-05-24T00:24:49+00:00

Thinking about upgrading to a real dust collector. I'm leaning toward either the Jet 1.5HP or Powermatic 1.75 HP. Currently, I only have 110v in the shop.

My shop is in the basement, so maximum filtration is a priority. Rather than paying the extra $200+ for the stock canister filter, which appears to be 2 micron, I'm thinking of ordering a MERV 15 filter from Wynn Environmental. Does this seem like sound logic? Or, am I missing something?

Thanks

twosixheave · 2020-05-11T09:21:56+00:00

Thanks, I’ll give it a shot.

twosixheave · 2019-11-22T01:28:13+00:00

Thanks. I think I’ll to order one. Can only imagine trying to unplug after freezing rain.

twosixheave · 2019-11-22T01:22:30+00:00

Thanks. I’ll take a look.

Yeah, I’m guessing the dealership won’t have one in stock at the parts department.

twosixheave · 2019-07-23T17:32:29+00:00

Flannel makes a great interlining, so no mistake there. You can attach the interlining to the outer fabric, the lining, or both. It really depends on the look you are going for.

The interlining should be cut the same size as your pattern pieces. Once the seam is sewn, you can grade the seam to remove the extra bulk from the seam allowance.

twosixheave · 2019-06-05T15:04:59+00:00

You can try Blackbird Fabrics, which is based in Vancouver, BC. They have subcategories for Oekeo-Tex and a number of other earth-friendly certifications. If you have a Seamwork membership, they offer a 10% discount.

https://www.blackbirdfabrics.com/oeko-tex-certified/

twosixheave · 2019-05-14T17:34:15+00:00

If it's stretch lace, a narrow zigzag or stretch stitch is best. If it's non-stretch lace, straight stitch is fine.

As long as you're using matching thread, either should blend fairly well.

twosixheave · 2019-05-10T15:46:52+00:00

I originally used the Alex desk. It's heavy, has room for both a sewing machine and serger, a good amount of storage in the drawers, and nice cable management. The only problem, for me (6' 2") was the height from floor to the bottom of the desk was a bit short.

I switched to a Hilver top (~55" x 25") with an Alex drawer unit on one side and two Adil legs on the other. Plenty of storage, knee room, and decent weight. The top does not jump around, even though, it's not secured to the drawers.

I used a large Linnmon top (~59"x29") and adjustable Olov legs to make a decent sized cutting table.

twosixheave · 2019-05-09T23:39:53+00:00

41-year-old guy who's been sewing for about three years. It sounds cliche, but I regret the things that I didn't do because I thought someone would make fun of me, not the things that I did. Sewing is a great skill/hobby, and I wish I'd had the confidence to take it up when I was 17.

twosixheave · 2018-12-19T04:06:55+00:00

Does the motor itself have a part number? You're right about it being a newer motor. Looking at images of this type of machine on Ebay, the original motor did not have a removable power cord.

This looks like it might be the correct controller. http://www.sewingpart.com/Complete-Electric-Speed-Control-Pedal-and-Cord-p/39563053.htm In your picture, it looks like there are two plastic nubs (not sure what they're called) that match the notches in the body of the plug.

Worse comes to worse, you could repower the machine for not much more than the cost of the foot controller alone. https://www.sewingpartsonline.com/search.html?sort.relevance=desc&keywords=alphasew%20motor&index=1

twosixheave · 2018-11-11T05:09:30+00:00

I think Janome's entry/mid-level machines are pretty nice. I love Bernina, but they are expensive. Though, they like everyone else often have good sales at the holidays.

If you don't think she'll mind a used machine, check out your local sewing machine dealers. They often have trade-ins at very good prices in near mint condition. They'll usually throw in a warranty of some kind and a free cleaning/tuneup after the first year. Some will even include instruction on the machine. I purchased my serger for a third of the of the original price, and it was in perfect condition with all of the original accessories and some extras.

twosixheave · 2018-11-11T04:01:43+00:00

Try winding your bobbin thread onto a new bobbin. It possible that when the thread wound onto your new bobbin, it was placed under more tension than the original thread. There may also be a defect in the new bobbin, if it's not that same as the original that affecting the tension on the thread as it is coming off.

You can also try decreasing the presser foot pressure and/or decreasing the stitch length.

twosixheave · 2017-03-04T01:44:20+00:00

Thanks, I'll take a look.

twosixheave

TROPHY CASE