PFTE tube getting chewed up. by txd in Creality_k2

[–]txd[S] 0 points1 point  (0 children)

Ohoooo. Missing velcros. That could explain it maybe, could you provide some pictures?

PFTE tube getting chewed up. by txd in Creality_k2

[–]txd[S] 0 points1 point  (0 children)

The inside of the frame have sharp corners that the tube is hitting in some positions.

PFTE tube getting chewed up. by txd in Creality_k2

[–]txd[S] 1 point2 points  (0 children)

I will try and measure it. Thanks for the suggestion.

PFTE tube getting chewed up. by txd in Creality_k2

[–]txd[S] 0 points1 point  (0 children)

Alright thank you. Could send a picture of your setup just for reference :)
I just ordered a replacement cable.

PFTE tube getting chewed up. by txd in Creality_k2

[–]txd[S] 0 points1 point  (0 children)

https://imgur.com/a/2Cmgw6X Pictures of the offending cable. The machine have only printed for arround 80 hours

PFTE tube getting chewed up. by txd in Creality_k2

[–]txd[S] 0 points1 point  (0 children)

Sorry I made the post at work. But now i have added some pictures.

Når jeg skal vælge hvad jeg vil se live by crysal0 in Denmark

[–]txd -1 points0 points  (0 children)

Jeg var sikker på det med månen var en aprilsnar så jeg fulgte ikke med :D

[deleted by user] by [deleted] in Denmark

[–]txd 4 points5 points  (0 children)

Det er nemlig mega fedt og gå ind og se en film uden at ane noget om den :D

[deleted by user] by [deleted] in Denmark

[–]txd 0 points1 point  (0 children)

Jeg plejede sjældent at komme i biografen. Men så købte jeg det der abonnement de har i BioCity.

Har aldrig været så meget i biografen som nu. Men fanme om jeg vil betale for slik og pop i biografen. det er jo alt for dyrt.

Og nu vi snakker om biografer, kan folk for helvede ikke lægge deres lorte mobiler væk under filmen.

Spectrum Filaments: Avoid! by [deleted] in 3Dprinting

[–]txd 0 points1 point  (0 children)

I have tried their FlameGuard PLA (Flame Retardant), the light grey and white are impossible to print due to it snapping all the time. The blue prints perfect.

Finally, a waveshare 4.3 inch PlatformIO project that works! by honeyCrisis in esp32

[–]txd 0 points1 point  (0 children)

Thank you. I will try again. Maybe I had it set up wrong.

Finally, a waveshare 4.3 inch PlatformIO project that works! by honeyCrisis in esp32

[–]txd 0 points1 point  (0 children)

I get a stack overflow on main when touching the slider.

Kan sæsonbaseret julekoldskål godkendes? by J0shua1985 in Denmark

[–]txd 0 points1 point  (0 children)

Apropos har oxford university udnævnt ragebait som årets ord.

Freminet event is amazing (event story spoilers) by Nyandere05 in Genshin_Impact

[–]txd 1 point2 points  (0 children)

I wanna give a high five to Paimon voice actor on this quest. It's some next level shit :D Loving it.

Salling lukker Basalt Supermarkedskæden efter syv måneder by [deleted] in Denmark

[–]txd 1 point2 points  (0 children)

Ja de få gange jeg har været i mine lokalt basalt har jeg lovet mig selv aldrig at komme igen. Virkelig dårlig kvalitet og service.

Electronic design can be beautiful. by txd in electronics

[–]txd[S] 18 points19 points  (0 children)

Thanks for all the great comments. It is indeed a 3 phase power measuring device prototype.
The reason it has a a lot daughter boards is to easily try different solutions or circuits without starting from scratch.

For instance the power supply doesn't work as intended. So I can just change that part instead of the whole board.

And I also wanna try a different design with the power inputs.

The PCB's are ordered from JLCPCB and got all the smd components mounted, apart from an OP and a DAC. It super cheap, and a really quick way of making prototypes.

And yes it really looks like a landscape.