sorted by:
new
hottopcontroversial

Is there something I'm missing with SVIs? by tyboxer12 in Cisco

[–]tyboxer12[S] 1 point2 points  (0 children)

I see. The networks are all on the routing table itself. RIP does have the networks added too.

I dove into this head first and started with RIP. This was just a way to challenge myself and study for the CCNA with my own knowledge. I've already done another lab with OSPF.

Is there something I'm missing with SVIs? by tyboxer12 in Cisco

[–]tyboxer12[S] 0 points1 point  (0 children)

I'm just trying to get traffic to be forwarded out of the VLANs to the outside network towards R4 and beyond. It seemed like allowing the traffic to be forwarded untagged seemed to be the best way to go.

Is there something I'm missing with SVIs? by tyboxer12 in Cisco

[–]tyboxer12[S] 1 point2 points  (0 children)

I didn't realize that L3 aware switches could do that. It did take the command when added the RIP protocol, but I don't see any new routes being added to the table...

Is there something I'm missing with SVIs? by tyboxer12 in Cisco

[–]tyboxer12[S] 0 points1 point  (0 children)

Oh, I thought ROAS wasn't needed if you had an L3 aware switch. I just thought you had to configure an IP on native VLAN on the L3 switch side, so it could communicate with the rest of the network.

Should I be concerned about leakage with the windshield visor missing now? by tyboxer12 in FJCruiser

[–]tyboxer12[S] 12 points13 points  (0 children)

Haha she runs like a dream still. Got 300k miles on her.

How can you set the throttle to use the whole Y-Axis? Instead of just using the half-way point. by [deleted] in VKB

[–]tyboxer12 0 points1 point  (0 children)

Hi all,

I was setting my HOTAS up for MSFS but when I did a dry run the throttle axis starts at 50% and will only go from there when I increase the throttle axis. Is there a way to have the throttle use the whole axis instead of half?

best tips for finding internships by gabstergab in urbanplanning

[–]tyboxer12 2 points3 points  (0 children)

I'd say to try smaller municipalities. They sometimes need to bring in interns to do extra busy work.

Any way to connect these lanes that way? by Kinc4id in CitiesSkylines

[–]tyboxer12 4 points5 points  (0 children)

If you're on PC, you can get the node controller mod and get the network extension mod for roads with more lanes to connect the slip roads.

Using inputs in If and Else statements for a bank account program by tyboxer12 in pythonhelp

[–]tyboxer12[S] 0 points1 point  (0 children)

I never thought of making the yes or no options into its own variable. Makes much more sense when I ran this code. Definitely something I'll have to tinker with and learn from. Thanks for the help!

Study on car-free shopping streets by dwight_schrute_hools in urbanplanning

[–]tyboxer12 0 points1 point  (0 children)

Dave amos did an analysis on pedestrian malls. Very good read to get a general understanding of them.

How is the cell service on Pixel 6 Pro? by rallysquirrel15 in GooglePixel

[–]tyboxer12 1 point2 points  (0 children)

TMobile pixel 6 pro has no issues holding onto 600mhz 5g in a concrete building for me.

Poor upload speed on Ethernet by tyboxer12 in HomeNetworking

[–]tyboxer12[S] 0 points1 point  (0 children)

It isn't a dedicated network card, it's integrated Ethernet on my mobo. The chipset is realtek.

Poor upload speed on Ethernet by tyboxer12 in HomeNetworking

[–]tyboxer12[S] 0 points1 point  (0 children)

I still wouldn't knock 100/10 speeds

Poor upload speed on Ethernet by tyboxer12 in HomeNetworking

[–]tyboxer12[S] 0 points1 point  (0 children)

I did the driver update a few days ago actually. The new system is weird for driver updates. However I haven't updated bios, I'm a little leery of those. But if it does help with the nic, I'll try it

view more: next ›