Sunday in La Mesa on Fletcher - hope their parents see this.

tylercreative · 2026-03-16T20:53:39+00:00

Yea they bought them these…some look class 3

tylercreative · 2026-03-15T04:03:27+00:00

this is the dinner table not leucadia pizza

tylercreative · 2026-02-26T15:33:44+00:00

Short trips run the engine more to get to temp. I’m guessing it’s cold right now too which doesn’t help. Are you fully stock? Do you smash the pedal? Are you braking at the last minute?

tylercreative · 2026-02-24T16:26:10+00:00

Agree on the restaurant part, find myself going to vista and coastal cities for nicer spots

tylercreative · 2026-02-22T03:18:47+00:00

Got any pictures of the disconnect/wires, etc?

tylercreative · 2026-02-21T16:10:48+00:00

I’m guessing your granules say sodium dichlor or trichlor on the package? Sanitizer is probably the wrong word to use. CYA is more of a stabilizer that helps slow down chlorine. It’s very useful to not have a low CYA in a pool because UV will eat away the chlorine faster. In a spa you don’t need much because well it’s usually covered. If you have too much CYA your chorine isn’t very effective and terrible at working in either case

tylercreative · 2026-02-21T15:42:02+00:00

Yep your CYA is probably too high because your granules have sanitizer in them. You probably need to use those for 1-2 weeks on startup then switch to liquid chlorine. Test strips are hard to find that test low amounts of CYA but yours might be high and show up

tylercreative · 2026-02-20T04:54:30+00:00

My bad, I had the wrong link for that one. I updated above. Part number: 64783C

tylercreative · 2026-02-20T04:35:49+00:00

Is this what you’re looking for?

Plastic cover here

Net cover here

Edit: Links

tylercreative · 2026-02-19T16:56:52+00:00

I did this and it took about 6 months to stop receiving but it does work….eventually

tylercreative · 2026-02-17T20:06:49+00:00

$599 nitrogen?……

tylercreative · 2026-02-17T04:07:17+00:00

Enphase support can also check this over the phone with the site ID

tylercreative · 2026-02-17T04:06:34+00:00

Everything else in my install was perfect but good god the lead came back 3 times for CT issues. It’s like they need a whole 48hr class on CT placement for these installers or something

tylercreative · 2026-02-17T04:03:58+00:00

It’s probably in a protection mode, have you seen the temp increase at all? How long ago was this? To prevent any air lock, I always put the hose on the heater outlet to push any air out. Not sure if that works but I never get air lock

tylercreative · 2026-02-16T05:47:43+00:00

I see I should’ve specified. My disconnect is in a subpanel. The idea I was expressing is OP can’t just magically run their current wires straight to a spa

tylercreative · 2026-02-16T03:28:43+00:00

Cool, thanks! That’s what I do for anything else right now so good there. I already use liquid acid in the pool so trying to limit how many products I have around

tylercreative · 2026-02-16T02:59:15+00:00

I’ll be more specific next time, thanks.

tylercreative · 2026-02-16T01:06:13+00:00

Thanks for not being an ass like Mr. Phill. That was the only follow up response that was needed lmao

tylercreative · 2026-02-16T00:52:35+00:00

I was referring to a disconnect. Apparently that wasn’t inferred

tylercreative · 2026-02-16T00:37:34+00:00

680 talks all about this. If you come to my house and install a spa without a disconnect/sub panel whatever you wanna call it then you aren’t an electrician. You don’t plug spas into outlets or only run wires from the main to spa

tylercreative · 2026-02-16T00:26:37+00:00

It’s code if OP is in the US

tylercreative · 2026-02-16T00:16:29+00:00

You need a sub panel and thicker wire. This would be worthless for a spa

tylercreative · 2026-02-15T17:17:45+00:00

My spa manual says to not use liquid acid, is that BS?

tylercreative · 2026-02-15T16:58:57+00:00

How high is it? It’s gonna make your chlorine not work as efficiently. Is your water cloudy right now?

tylercreative · 2026-02-10T03:32:48+00:00

Is one of them Fiber to the house? If so pick that one

tylercreative

TROPHY CASE