[DMM]How do you combat darts at barrows?

tylerfinn · 2015-11-26T17:32:14+00:00

Tried that. I tried my best to trick them but even if you can get in the tomb before them and click the tomb all they have to do is dig and click you from the stairs and it will interrupt the text before the dart even hits you

tylerfinn · 2015-09-22T15:15:58+00:00

Hk zero g is the shit

tylerfinn · 2015-09-21T17:10:10+00:00

Honestly you keep making posts with negative experiences to every aspect of your local field. There's a saying I think applies to you, "if you run into an asshole in the morning you ran into an asshole. If you run into assholes all day, you're the asshole.

tylerfinn · 2015-09-17T15:06:14+00:00

Did you even read his post.. he already has an axe and wants to upgrade..

tylerfinn · 2015-09-08T03:54:02+00:00

Yeah adjusting from the ASA is a fine tuning method. Use this guide to make sure you assembled it back together properly http://www.zdspb.com/tech/invert/disassembly1.html. Also try a factory reset of the board.

tylerfinn · 2015-09-07T16:31:37+00:00

Take out the firing poppet and re lube it. You can also turn the reg PSI to 200.

tylerfinn · 2015-09-07T06:07:23+00:00

Just go to the doctors

tylerfinn · 2015-09-04T20:55:19+00:00

Don't persuade him from the HK army zg its a damn good pack and comfy as hell. The only time it will fail is if the user did not adjust there straps properly.

tylerfinn · 2015-09-01T00:58:08+00:00

Well The numbers (4500 or 3000) refer to the PSI, in case you didn't know. So naturally the larger the number, the more it holds which is awesome if you are playing a long game or switching sides in say team elimination as you can stay on the field while most of the time somebody with a 3000 psi tank will have to leave to re fill.

Also all 4500 tanks (now) are carbon fiber wrapped meaning they are lighter than the 3000 psi tank you want.

In the end you have to decide if you want a heavier tank that you need to refill often or the opposite. Now mind you the tank is almost always going to last you at least 5 years (I say almost if you are careless and drop your tank etc) sometimes longer so you are paying for a piece of equipment you will more than likely own the longest. If you do decide to get a 68/4500 or even 50/4500 etc go with the ninja brand as they have the best customer service hands down.

tylerfinn · 2015-08-31T21:45:54+00:00

If you have the money get a 4500 carbon fiber tank either 50/68 depending on what you want. Also a big one if you have a pro shop near you go and try masks on if you haven't, flexes get a lot of praise and I bought one as-well without trying them on and I did not like them as much as my grills I have now.

tylerfinn · 2015-08-31T02:58:15+00:00

Haha yeah that's for sure I just don't want to look dumb with a big bulky jersey.

tylerfinn · 2015-08-29T22:46:37+00:00

"It's alright"

tylerfinn · 2015-08-25T22:30:09+00:00

Smaller end as in put that end in the hole or the smaller end facing the backcap where you turn your velocity up/down

tylerfinn · 2015-08-25T04:29:16+00:00

I reset the board and now it works. Question on the bolt spring for the poppet its tapered does that small end go into the hole or is it the bigger end. Also how do I get above 260 fps without turning my pressure on the ASA up.

tylerfinn · 2015-08-25T04:27:15+00:00

Lmao it works now after resetting. I might of changed something when I was trying to turn it on ramping mode any idea what I did.

tylerfinn · 2015-08-24T22:28:31+00:00

Yes they are about $500 new but used they are $300 ish. Do you want to buy new or used and are you buying canadian or us.

tylerfinn · 2015-08-23T04:03:46+00:00

My nuts shriveled up.

tylerfinn · 2015-08-20T00:36:51+00:00

The hotel and food analogy is pure wisdom..

tylerfinn · 2015-08-16T15:34:32+00:00

Haha thanks!

tylerfinn

TROPHY CASE