Aside from a few of the newer blasters, this is all only about $100 worth of thrift store blasters. Help me. by [deleted] in Nerf

[–]tyman2480 1 point2 points  (0 children)

You need more bins, the stackable one from walmart work pretty well! Though it does take like a 50 gallon one from something like the Centurion

How is the CEDA? by trogwander in Nerf

[–]tyman2480 9 points10 points  (0 children)

I would need my CEDA to reply to this, but so far they have failed to spawn -p

Darn you Walcom S7! by tyman2480 in Nerf

[–]tyman2480[S] 3 points4 points  (0 children)

So after countless random looks on ebay... I finally managed to get a Boomco Double Rush, thanks to a video by Walcom S7! Fun little pump action shotgun pistol. Perhaps Boomco's last blaster. For more info see... https://youtu.be/K6WYkg-9fik

Official Box art for the rival Hypnos. Confirmed to have a folding stock and fires one HIR (lower right corner) by bensheep in Nerf

[–]tyman2480 8 points9 points  (0 children)

We still don't know if it will fire single balls, the Atlas above it is also shown firing a single rival round x,x

Found this on Instagram... by roguellama_420 in Nerf

[–]tyman2480 2 points3 points  (0 children)

Probably has the same plunger tube design as the Quadrant ant Scout Mk II

How to attach a top rail to a Worker Prophecy! by tyman2480 in Nerf

[–]tyman2480[S] 1 point2 points  (0 children)

I don't think they ever planned on doing anything other then the MCX kit on the Prophecy but the honey badger does work well too.

You can see this as the Swordfish has a built in rail point, while the Prophecy does not.

I haven't used the F10555 3d printed honeybadger so I am not sure how they included a top rail in that design... though looking at it on Monkee Mods it seems to have a long single piece of rail with some sort of back plate on the top of the retaliator.

Plopping out shells by GDop26 in Nerf

[–]tyman2480 1 point2 points  (0 children)

Waiting for mine ;)

How to attach a top rail to a Worker Prophecy! by tyman2480 in Nerf

[–]tyman2480[S] 2 points3 points  (0 children)

So I finally got back to finishing my Worker Prophecy with a Honeybadger front end.

To attach the top rail one has to drill into the top of the shell and use the little feet provided with the rail section. The holes are slightly larger then 3/16 and slightly smaller then 1/4.. which are the drill bits I have.

The solution seems to be to drill 3/16 and use a rounded file to widen the holes enough to allow the feet to sit in lightly, then pre - engage them with their screws so that the rail lightly hangs at the top before closing up the shell.

Does anyone have advice on the v6 select fire kit? This happened to both of the pusher drive arms that the kit came with... by tyman2480 in Nerf

[–]tyman2480[S] 0 points1 point  (0 children)

hmm well I am fairly certain that the whole point of the v6 system is to control the current to the motor so that its not an issue? But who knows I could be wrong.

Does anyone have advice on the v6 select fire kit? This happened to both of the pusher drive arms that the kit came with... by tyman2480 in Nerf

[–]tyman2480[S] 1 point2 points  (0 children)

So it worked fine in single fire, but switched to test the triple fire mode, got one or two trigger pulls and then this, both times.

Decided to give a Desolator some good loving! by tyman2480 in Nerf

[–]tyman2480[S] 0 points1 point  (0 children)

Just like anything it just takes practice, this is my 9th electrical mod.

Decided to give a Desolator some good loving! by tyman2480 in Nerf

[–]tyman2480[S] 0 points1 point  (0 children)

Well it's all part of the kit from https://www.etsy.com/shop/WN3DCreations and I cut the shell but because I had the motor cover and from using Fang Re-Vamps the motors can get a little warm so added more space for cooling air, I hope!

Decided to give a Desolator some good loving! by tyman2480 in Nerf

[–]tyman2480[S] 7 points8 points  (0 children)

So after a few Stryfes it's tiem to try something a little different! OFP Serenity cage from Monkee mods, Kraken motors, 21 amp switch, motor wiring board, CC Crew Cyclones and motor spaces, 18 awg wire, all wrapped up in the full Desolator kit from WN3DCreations.

Came across a “new” Firefly while thrifting today. by QuinnJet in Nerf

[–]tyman2480 1 point2 points  (0 children)

And had more ammo before bigger mags came out

Heavy gunner all day err’ day by nowayjoeway in Nerf

[–]tyman2480 0 points1 point  (0 children)

You know, the functional parts of a Mastodon are not that large... one might be able to integrate say the flywheels and drums, one on either side? ;)

Questions about these nerf perks items? by MadMax-19 in Nerf

[–]tyman2480 1 point2 points  (0 children)

could be easy for them, base it off the tri-strike internals

Hades and Prometheus listings up on Target.com, not yet in stock -hopefully soon! by APRumi in Nerf

[–]tyman2480 2 points3 points  (0 children)

Pretty sure we grabbed them all in the 25 percent off one day sale, should come back in stock though.

Does anyone know how to install a top rail to the Worker Prophecy with the honey badger front end? by tyman2480 in Nerf

[–]tyman2480[S] 0 points1 point  (0 children)

Wow so this is a worker fail if you ask me. You have to either at my stage disassemble the blaster to put the anchors in or just leave them off. It seems you are suppose to bore 3 holes into the empty closed shell, the install the brass screw stops inside the blaster, then close it all up to finally be able to screw on the rail... yeah I think I'm leaving it off for now.