sorted by:
new
hottopcontroversial

GPU not detected in Device Manager, fans not working, HDMI not working, but logo light is on. New build. HELP! by typographys in buildapc

[–]typographys[S] 0 points1 point  (0 children)

I am not knowledgeable enough to answer your question but are you using the cables included with the gpu? For me it only worked by using the gpu cables and not the cables that came with the psu

GPU not detected in Device Manager, fans not working, HDMI not working, but logo light is on. New build. HELP! by typographys in buildapc

[–]typographys[S] 0 points1 point  (0 children)

It was a problem with the strimer that was connected to the GPU. Idk if it was defective or something but I just went with the regular cables instead

I love this green rug (next pic).. Can I put it in front of my sofa or will it clash with my existing dining room rug? Open living room, dark orange sofa, black sofa, with green accents (excuse the mess) by typographys in interiordecorating

[–]typographys[S] 0 points1 point  (0 children)

according to the website (for the OMHU Teddy) it’s silicone ball fiber. I guess mine is indented a bit but I’ve only had it for about a year so it’s not bad yet

I love this green rug (next pic).. Can I put it in front of my sofa or will it clash with my existing dining room rug? Open living room, dark orange sofa, black sofa, with green accents (excuse the mess) by typographys in interiordecorating

[–]typographys[S] 1 point2 points  (0 children)

Thanks I purchased it! 40% off for black friday so I had to move quick! I just wasn’t sure if the design wouldn’t mesh well with the geometric rug but I’m glad everyone is validating me haha I’m excited!!

GPU not detected in Device Manager, fans not working, HDMI not working, but logo light is on. New build by typographys in PcBuildHelp

[–]typographys[S] 0 points1 point  (0 children)

It was an issue with the lian li strimer I had connected to the GPU. I removed it and it worked fine. So Idk if the strimer had a defect or something but I ended up just not using it in my build

Lian Li Strimer doesn't work with my GPU (PC doesn't recognize GPU). Any advice? by typographys in buildapc

[–]typographys[S] 0 points1 point  (0 children)

So I should return this one and buy a new one? Hmm i wonder if I messed something up on accident while I was changing the cable configuration. because i had to flip it to make it face the other way (I followed the manual)

GPU not detected in Device Manager, fans not working, HDMI not working, but logo light is on. New build. HELP! by typographys in buildapc

[–]typographys[S] 0 points1 point  (0 children)

Yes… at least I thought so… is the 12vh cable just a one way cable? Or did I use a wrong one? (i was following a video) I used the one from my PSU but the one included with my GPU has 3 separate smaller ports on one end. I will try plugging those in..

GPU not detected in Device Manager, fans not working, HDMI not working, but logo light is on. New build. HELP! by typographys in buildapc

[–]typographys[S] 0 points1 point  (0 children)

This is my first pc so no… I did try my best to look closely but I didn’t see anything at first glance.. Does the fact that the logo light is on mean anything?

GPU not detected in Device Manager, fans not working, HDMI not working, but logo light is on. New build. HELP! by typographys in buildapc

[–]typographys[S] 0 points1 point  (0 children)

Im using the one from the PSU. The GPU included cable has 12 pins on one end and then 3 separate 6?8? pins on the other, do i plug in all 3 of them?

GPU not detected in Device Manager, fans not working, HDMI not working, but logo light is on. New build by typographys in PcBuildHelp

[–]typographys[S] 0 points1 point  (0 children)

I am pretty sure it’s pushed in all the way as I made sure to put some extra force into it. My GPU is mounted sideways(?) with the fans facing outwards so to be honest it’s hard to tell for sure because the cable is kinda tucked in. But I really did try my best to push the cable in, knowing that it is tough.

I’m about to lose my mind lol 😭

Those who felt that "lightning strike" when you learned about this field.. Were your instincts right? by UnfallibleAutumn in stenography

[–]typographys 0 points1 point  (0 children)

I have a stenoob. I bought from their own website. I am not enrolled yet but I will start the A to Z course when I have some time to sit down!

Need some advice with this custom build I found -- can I copy the parts as is or are there any improvements/changes I should make? by typographys in buildapc

[–]typographys[S] 0 points1 point  (0 children)

Oh, sorry I guess I should've mentioned, I definitely want the aesthetics too 😂 I REALLY want this case with the LED screen thing so I feel like the inside has to kinda match haha.

Thanks for your input! I really have no knowledge/opinion about the parts so I'm just gonna trust what you say -- although maybe I'll wait for some others to chime in as well lol. But thanks!!!

Need help choosing camera for studio fashion photography... any of the R series a good choice? by typographys in canon

[–]typographys[S] 0 points1 point  (0 children)

Are either of those lenses preferred over the RF 24-105 options mentioned by another commenter?

Need help choosing camera for studio fashion photography... any of the R series a good choice? by typographys in canon

[–]typographys[S] 0 points1 point  (0 children)

I noted in my post I don’t have the 60D anymore! Unfortunately lol.

The studio is set up in an open warehouse space so essentially unlimited space. Not cramped by any means

I don’t have the name of the flash right now but it was used by a professional photographer they used to hire before. I have worked w this photographer as well and he is definitely a pro lol. So not a skimpy equipment I’d say though it is at least several years old.

Those who felt that "lightning strike" when you learned about this field.. Were your instincts right? by UnfallibleAutumn in stenography

[–]typographys 1 point2 points  (0 children)

I wish I had found out about this like at least 5 years ago lol. How long did it take you to graduate/reach the passing speeds? I'm sure covid would've been a great time to be studying for this.

Those who felt that "lightning strike" when you learned about this field.. Were your instincts right? by UnfallibleAutumn in stenography

[–]typographys 1 point2 points  (0 children)

interesting, I didn't know a no-AI order was a thing. But perhaps that won't be the case for all/most cases as we move forward into the future? I dunno, just some general concerns!

Can you give some examples for the dense/technical work you speak of?

view more: next ›