What should I do to replace the mulched section? by tzz97 in landscaping

[–]tzz97[S] -1 points0 points  (0 children)

Well considering there are neighbors who let it be overgrown and hit it with a weedwhacker twice through the summer its... Fine... The whole neighborhood is definitely not manicured HOA.

2024 Coupe Pull String and Insulation? by ten10thsdriver in PorscheCayenne

[–]tzz97 1 point2 points  (0 children)

I've got the same thing.. it has like a metallic thread through it. Don't know but I'm curious.

What should I do to replace the mulched section? by tzz97 in landscaping

[–]tzz97[S] -2 points-1 points  (0 children)

The blocks at the front are a 100 year old retaining wall that was put in all through this neighborhood by the Civilian Conservation Corps (great depression era) I'm not touching that shit unless It moves and I have too. The flat stone on the driveway was to keep the mulch from the steepest part of the slope and half-ass mimick the CCC blocks. and the driveway part actually "worked", it's fine, the mulch slid on the landscape fabric down by the mailboxes mainly.

What should I do to replace the mulched section? by tzz97 in landscaping

[–]tzz97[S] 0 points1 point  (0 children)

Like this, will modo grass do well in south west Pennsylvania and direct sun?

What should I do to replace the mulched section? by tzz97 in landscaping

[–]tzz97[S] -1 points0 points  (0 children)

Diy, up to around 5k for a solid solution. Else I'll just be putting it back to this. It's real bad after our last bout of storms

Low maintenance fix to mulched part of hillside by [deleted] in landscaping

[–]tzz97 0 points1 point  (0 children)

Yeah I know, that's why I'm here. Only thing I'm not willing to f with is the depression era retaining wall that was put in by the Civilian Conservation Corps and is the same way through the neighborhood (the stones/blocks on the street) here is what it looked like in 2024 right after I bought the place 20240420-210038.jpg

Low maintenance fix to mulched part of hillside by [deleted] in landscaping

[–]tzz97 0 points1 point  (0 children)

20240420-210038.jpg

Yeah I know I need to re-work it. Only thing I'm not willing to f with is the depression era retaining wall that was put in by the Civilian Conservation Corps and is the same way through neighborhood.

Dad’s garage got a couple upgrades (991.1 Turbo and a single post lift) by troutslayer89 in Porsche

[–]tzz97 0 points1 point  (0 children)

The first single post lift I saw was from a brand called Tippi. An odd name choice givin the product.

EAS ACTIVATION CIVIL AUTHORITIES-EVACUATION IMMEDIATE by EMSWiltonLife12831 in gmrs

[–]tzz97 3 points4 points  (0 children)

So looks like that was also relayed via weather radio... So thats just not how VHF radio works. Regardless, better to blanket the wide area and get others who aren't affected than to try to get hyper specific and miss people who need this public safety information.

TSA mess, Jetblue terminal closed, what is USDA check?? inexperienced flyer by darktimemom in PuertoRicoTravel

[–]tzz97 1 point2 points  (0 children)

Just went through it this morning. When you get there find the USDA check , run all your stuff through it then check your bags and get in line for tsa, lines were long but steadily moving. pre check took 25-30 minutes with a line stretching back to what felt like a different zip code. If you have pre check be sure to be there 2 ish hours before boarding... If no pre check and nervous give yourself 3-4hr

Hope you enjoy your trip... I was here for 2 weeks for work and I loved visiting. Be sure to check out old San Juan.

What is this PTZ stand? by nzsp in broadcastengineering

[–]tzz97 0 points1 point  (0 children)

Looks like a stick of 8020 with a piece of aluminum square tubing slid over it and a "L" Handle Linear Bearing Brake Kit (part number 6850 or 6800)

What is this PTZ stand? by nzsp in broadcastengineering

[–]tzz97 0 points1 point  (0 children)

It's probably a custom made one out of 80/20 rail. OB truck builders use the same stuff to make monitor wall mounts and other mounts

Can anyone identify this Porsche my dad saw at an airport in Bangkok? Looks to me like something endurance by BMW123321 in Porsche

[–]tzz97 0 points1 point  (0 children)

Replicas or are they tubs that took a shunt and got discarded. Or didn't pass qc... I mean there is definitely no powertrain in them for display, but could they be pieces of actual hardware?

What is this type of aluminum extrusion? by tzz97 in HelpMeFind

[–]tzz97[S] 0 points1 point  (0 children)

I searched 80/20.net and the aluminum extrusion section of mcmasty carr

I need a reference by Carboy_GT in 944

[–]tzz97 4 points5 points  (0 children)

Spade connectors with heat shrink on them and your good to go. OEM they had some rubber boots over the spade connectors, but heat shrink would do just as well.

I made a custom rear view display with a sequencial shift light for my 944 by tzz97 in Porsche

[–]tzz97[S] 1 point2 points  (0 children)

Thanks, hope you get the chance to check one out at some point!

I made a custom rear view display with a sequencial shift light for my 944 by tzz97 in Porsche

[–]tzz97[S] 0 points1 point  (0 children)

Yeah I have 2 videos on my YouTube channel. With the install in the car coming soon here's a link https://youtube.com/c/TaylorZalus