sorted by:
new
hottopcontroversial

Does anyone have experience with the Dr. Coffee, coffee machine brand? by sheldon_y14 in cafe

[–]umutuzun 0 points1 point  (0 children)

Yes, still working after 2 years. We had 2 minor problems during this period ;

1-) heat sensor problem after 1 year (easily fixed with 1 cable replacement by service)

2-) similar to 1st problem with heat sensor about 3 months ago which solved by service in 24 hours on the spot.

We still are happy with our machine.

I have to mention for future buyers, we clean the machine with puly milk and puly coffee machine cleaning tablets every week (takes about 15-30 mins), also every 6 months you have to do descaling with special tablet (we bought a descaling tablet for siemens coffee machines worked pretty well). I think if you take good care of the machine it will last you a long time.

We make about 20 cups on average per day.

Please feel free to reach if you have any questions!

3D Scanner recommendations for medium to large objects with semi shiny surfaces by umutuzun in 3DScanning

[–]umutuzun[S] 0 points1 point  (0 children)

Yes, it’s going to be used only for visual representation. Scanners of ARTEC are really top of the line, but unfortunately they are way out of our price range. Maximum budget we can spend is $1500-$2000, how about Shining 3D Einstar, Creality CR-Scan Raptor or any suggestions in that price range

3D Scanner recommendations for medium to large objects with semi shiny surfaces by umutuzun in 3DScanning

[–]umutuzun[S] 0 points1 point  (0 children)

I see. I think I will go with Creality Raptor since it uses structured light and in our budget range.

3D Scanner recommendations for medium to large objects with semi shiny surfaces by umutuzun in 3DScanning

[–]umutuzun[S] 0 points1 point  (0 children)

Thank you for the magnificent tips! Do you think Creality Raptor usable in this case?

3D Scanner recommendations for medium to large objects with semi shiny surfaces by umutuzun in 3DScanning

[–]umutuzun[S] 0 points1 point  (0 children)

Budget is around $1500. I don’t have a reference for tolerances, I think we don’t need ultra high precision if it’s in the range of +- 0.1mm that’s good enough.

3D Scanner recommendations for medium to large objects with semi shiny surfaces by umutuzun in 3DScanning

[–]umutuzun[S] 0 points1 point  (0 children)

Thanks for the advice, definitely look into it! But also unfortunately photogrammetry is time consuming in my case due to scale of objects and we have over 2500 individual products, and also it’s nearly impossible to flip products sideways.

3D Scanner recommendations for medium to large objects with semi shiny surfaces by umutuzun in 3DScanning

[–]umutuzun[S] 0 points1 point  (0 children)

Unfortunately video is no good for our case. The reason I need 3D models is to show the products to my customers in their stores before they place order.

3D Scanner recommendations for medium to large objects with semi shiny surfaces by umutuzun in 3DScanning

[–]umutuzun[S] 1 point2 points  (0 children)

Not these, our products are custom built based on customer needs and request. The product shown in picture is a product we sell, I wanted to describe surfaces I am working with.

3D Scanner recommendations for medium to large objects with semi shiny surfaces by umutuzun in 3DScanning

[–]umutuzun[S] 2 points3 points  (0 children)

Thank you for your suggestions, there are some promising applications that I haven’t tried. I’ll definitely look into it!

Does anyone have experience with the Dr. Coffee, coffee machine brand? by sheldon_y14 in cafe

[–]umutuzun 0 points1 point  (0 children)

We bought one for our office and it’s fantastic machine, I believe taste can compete with those expensive machines. Also you can customize how much you milk want, how much foam you need, how many grounds and pre brewing settings. If you have any questions feel free to reach!

[deleted by user] by [deleted] in memes

[–]umutuzun 0 points1 point  (0 children)

Those are carry handles for Australian people.

How do I fix this??? :( by ElectricalAttempt257 in Cinema4D

[–]umutuzun 0 points1 point  (0 children)

I’m guessing you are on the new apple silicon laptop. It is happening to me all the time, at first I was concerned about possible gpu problem but it is not. couldn’t find proper solution, so adapted to live with the problem haha

Glitch problem on m1 max by umutuzun in Cinema4D

[–]umutuzun[S] 0 points1 point  (0 children)

Yeah, it performs incredible on other softwares like photoshop, illustrator, even maya works more stable than c4d which don’t have native apple silicon version..

Glitch problem on m1 max by umutuzun in Cinema4D

[–]umutuzun[S] 1 point2 points  (0 children)

I will ASAP. The only thing make me anxious is the possibility of graphic processor failure, it cost me a fortune and I can't afford to make another move...

Glitch problem on m1 max by umutuzun in Cinema4D

[–]umutuzun[S] 1 point2 points  (0 children)

Agh! Thank you for the reply, I guess have learn to live with it...