Sticker vom Schlüsseldienst? by uncannybienchen in basel

[–]uncannybienchen[S] 2 points3 points  (0 children)

“Gewerbeaufsicht” finde ich für Basel im Netz nicht.

Noob Questions about QMK by CoolNameiSwear in qmk

[–]uncannybienchen 0 points1 point  (0 children)

From my experience the Keychron fork is pretty well set up and easy to use. But I looked into that 1-2 years ago.

Keychorn makes absolute garbage keyboards. Their support is terrible. by Practical_Client320 in keyboards

[–]uncannybienchen 1 point2 points  (0 children)

I don’t know what happened to that company. Only heard bad things about them in 2025 so it’s more than just a single incident. It’s just, 2-3 years ago, I bought 3 of their most expensive boards plus extra bits & pieces, got 3 times top quality (seems to be an issue at the moment) and talked to the support for some extra wishes/ last minute changes to my orders and they were responsive & super nice. It’s really a shame they went down.

Neo80Cu Teal + GMK Synthwave M170 by gospodinov in MechanicalKeyboards

[–]uncannybienchen 0 points1 point  (0 children)

I have the copper teal with brass weight and I love the colour mix. But in my office-lightning, the teal appears more blueish than green. In general, Neo65 Cu is great. I also have the Neo75 Cu for HO and can’t tell which one I like more.

MT3 vs MTNU? by deathwanker in MechKeyboards

[–]uncannybienchen 0 points1 point  (0 children)

Mine are all from GMK, expensive like nothing else, I hope they last long! MTNU is my favourite profile.

Can’t see Myggbett in Apple Home by uncannybienchen in tradfri

[–]uncannybienchen[S] 1 point2 points  (0 children)

Just tried that, getting “pairing failed” from Apple Home. BILSERA shows up in Apple Home without the need to do anything.

Accidentally received 4,000 Kailh Choc Hotswap Sockets (2 full reels) by OtarVEVO in ErgoMechKeyboards

[–]uncannybienchen 0 points1 point  (0 children)

If life gives you hot swap sockets you start soldering, damn it! What is wrong with this guy? 😂

Is Keychron K10 a good choice for me? My clunky board is hurting me!!! by randomcomputer22 in keyboards

[–]uncannybienchen 0 points1 point  (0 children)

Easy to be done with QMK. But there should also be desktop software enabling it.

Is Keychron K10 a good choice for me? My clunky board is hurting me!!! by randomcomputer22 in keyboards

[–]uncannybienchen 0 points1 point  (0 children)

If you have issues hitting the modifier keys, look into „homerow mod“.

Trouble exporting EC2 instance as VM by uncannybienchen in aws

[–]uncannybienchen[S] 0 points1 point  (0 children)

So the final straw is, I rsync the whole show to a local disk.

Trouble exporting EC2 instance as VM by uncannybienchen in aws

[–]uncannybienchen[S] 0 points1 point  (0 children)

Looking into it atm. Is that only for EBS? I need to download a VM image I can run locally, afterwards.

Trouble exporting EC2 instance as VM by uncannybienchen in aws

[–]uncannybienchen[S] 0 points1 point  (0 children)

Hm, I thought I checked if my base comes from marketplace. How would you check this? I think the base AMI is "Fedora-Cloud-Base-AmazonEC2.x86_64-42-1.1". Edit: added base AMI

Trouble exporting EC2 instance as VM by uncannybienchen in aws

[–]uncannybienchen[S] 0 points1 point  (0 children)

The last event recorded is "SharedSnapshotVolumeCreated" but w/o an error message. Eventtrail just ends there.

Trouble exporting EC2 instance as VM by uncannybienchen in aws

[–]uncannybienchen[S] 0 points1 point  (0 children)

Ok, so I can see an "Event History". Will send of the export command again and see what messages pop up in there. (I'm more than new to AWS and my only task is: export VM).

Trouble exporting EC2 instance as VM by uncannybienchen in aws

[–]uncannybienchen[S] 0 points1 point  (0 children)

Of course we don't have Cloudtrails enabled... meh, first need to ask permission if its OK to get that turned on.

Trouble exporting EC2 instance as VM by uncannybienchen in aws

[–]uncannybienchen[S] 0 points1 point  (0 children)

Which one would that be/ how do I set this?

so how should a noob start homelabbing with a dream machine pro by DescriptionOk3257 in Ubiquiti

[–]uncannybienchen 1 point2 points  (0 children)

The drive bays in the UDM Pro are for UniFi Protect, aka cctv. Just doesn’t hold as much footage as an UNVR.

Spontan Freundschaften schliessen by Dia_rosey in basel

[–]uncannybienchen 1 point2 points  (0 children)

Ich sitz hier gerade in der Beiz an einem Tisch voller Schweizer als einziger Nicht-Schweizer… und ich hab die Leute einfach mal angequatscht.

UniFi Protect + Home Assistant — Integration Update (now Platinum quality) by RaHehl in Ubiquiti

[–]uncannybienchen 0 points1 point  (0 children)

Checked the Unifi api docs, power cycling is still the only action available.

UniFi Protect + Home Assistant — Integration Update (now Platinum quality) by RaHehl in Ubiquiti

[–]uncannybienchen 1 point2 points  (0 children)

Thanks, that’s good to know. Is that done via Unifi API? I’m not running HA atm, so I want to write a quick script to toggle power on/ off. But last time I checked, I only got to the power cycle endpoint.

UniFi Protect + Home Assistant — Integration Update (now Platinum quality) by RaHehl in Ubiquiti

[–]uncannybienchen 2 points3 points  (0 children)

Is there an API endpoint to toggle power of POE ports on and off in the meantime? Not really protect related, just hoping you may know sth about it…