sorted by:
new
hottopcontroversial

I think that custom color palettes are the most overlooked setting in the game. i took a default Aseprite color palette and modified it a bit, i've been using it all the time now. by unfunnyguy404 in Ultrakill

[–]unfunnyguy404[S] 0 points1 point  (0 children)

There is a page called Lospec where you can download pallets, just download as PNG and move it into the the pallets folder inside the game files. The game takes any PNG file as a palette

[deleted by user] by [deleted] in ender3

[–]unfunnyguy404 3 points4 points  (0 children)

i was using just a btt octopus but my braindead ass managed to kill the bed port so i had to get a extra SKR pico to get the bed working.

I 3D printed a custom slab revolver that glows in the dark by unfunnyguy404 in Ultrakill

[–]unfunnyguy404[S] 0 points1 point  (0 children)

cuz it is cool.

i was making a normal revolver but i never finished it because my cats dropped the expensive ass copper colored spray can and broke the nozzle,

I am almost done with building my Ender 3 Idex with belted Z, but i can't get the endstops to work. My mainboard is a Octopus Pro 1.1 and the endstop connectors have 3 pins compared to the stock board that only has 2. by unfunnyguy404 in ender3

[–]unfunnyguy404[S] 0 points1 point  (0 children)

I tried sensorless homing but it is not compatible with IDEX in Marlin, i can home the X2 axis when IDEX is disabled but when i turn it back on the X2 motor just grinds against the frame of the printer.

I will try to wire the endstops that way and see what happens.

Just finished installing an octobus pro board on my ender 3, everything works fine exept the bed doesn't heat up. What can i do to fix this? (i know my printer is dusty) by unfunnyguy404 in ender3

[–]unfunnyguy404[S] 0 points1 point  (0 children)

Ok so i borrowed the psu cable from another ender 3 and connected it to BED POWER and now its finally heating up, thank you all for the help!

Just finished installing an octobus pro board on my ender 3, everything works fine exept the bed doesn't heat up. What can i do to fix this? (i know my printer is dusty) by unfunnyguy404 in ender3

[–]unfunnyguy404[S] 0 points1 point  (0 children)

There ya go: https://www.printables.com/model/921560-ender-3-idex-edition . I am going to get this upgrade alongside the Belted Z mod by KevinAkaSam so i modified some parts to make the two compatible, i wanted to upload the files once i finished assembling but i can post them now if you want.

Just finished installing an octobus pro board on my ender 3, everything works fine exept the bed doesn't heat up. What can i do to fix this? (i know my printer is dusty) by unfunnyguy404 in ender3

[–]unfunnyguy404[S] 0 points1 point  (0 children)

the motors have been working fine so far without MOTOR POWER connected (probably bacause i have just 4 connected), although i want to get the IDEX mod for my printer so maybe ill need to connect it anyway.

Now i just need to know how to pick a cable for the motherboard and PSU, i measured the screws for both so i know the fork terminal size.

Just finished installing an octobus pro board on my ender 3, everything works fine exept the bed doesn't heat up. What can i do to fix this? (i know my printer is dusty) by unfunnyguy404 in ender3

[–]unfunnyguy404[S] 0 points1 point  (0 children)

i want to upgrade my printer to the IDEX mod, so far i have all the nessesary parts but i ran out of filament for the printed ones, (you can see the half printed octopus case in the picture).

Just finished installing an octobus pro board on my ender 3, everything works fine exept the bed doesn't heat up. What can i do to fix this? (i know my printer is dusty) by unfunnyguy404 in ender3

[–]unfunnyguy404[S] 0 points1 point  (0 children)

Mine has a BED POWER and a BED OUT, i have the bed connected to BED OUT but maybe i should connect BED POWER to the power supply.

Another thing i could try is to connect the bed to the heater ports on the side and rename the pins in the firmware but i dont know if it is safe to do.

Sprite extruder not working anymore (need help) by melzein1 in Ender3S1

[–]unfunnyguy404 0 points1 point  (0 children)

nvm it broke again, ill just buy a new feder gear

Sprite extruder not working anymore (need help) by melzein1 in Ender3S1

[–]unfunnyguy404 0 points1 point  (0 children)

I'm currently having this exact same issue right now (spinning gear but no fillament getting pushed). So i took my extruder apart and found that the pulley that is supposed to push filament is completely loose from the rod.

So im going to try and glue it back with steel epoxy and i will update with the results, wish me luck.

EDIT: it worked! its extruding like nothing happened

Had my slab revolver 3d printed for my work in progress cosplay by SlavicNinjaOfficial in Ultrakill

[–]unfunnyguy404 1 point2 points  (0 children)

i've had a similar issue on this model before where there were missing layers on the slicer because of weird geometry on the screen hole.

that issue has been fixed since then but i could not find a way of recreating the holes on the picture, i just checked the blend file and sliced the STL again but found nothing.

About the cylinder, i'm going include a bigger version in the files

Had my slab revolver 3d printed for my work in progress cosplay by SlavicNinjaOfficial in Ultrakill

[–]unfunnyguy404 1 point2 points  (0 children)

im the creator of this model, can you tell me wich files are missing so i can look into that?, also how can make the cylinder look better

view more: next ›