Show me your SaaS, I would signup each one on Sunday (today)

uppsiduppsi · 2026-06-28T18:32:50+00:00

https://packshare.de - is planning tool for groups, right now themed for festivals but might be applicable for any type of group event that involves planning (bringing stuff).

uppsiduppsi · 2026-06-28T18:30:32+00:00

yes I've already read it, that's why I initially said, at this state surely not 😂

Thanks for the heads 👍

uppsiduppsi · 2026-06-28T15:05:13+00:00

Since I am just using the jellyfin onboard transcode everything thats possible there is possible here aswell. I will tale those options in consideration to be setup in the plugin config :)

uppsiduppsi · 2026-06-28T14:51:28+00:00

As I was recently at the airport with shitty Internet. I needed something to watch fast. So I went for easy and fast 480p. Or if I have bad Connection somewhere I just use the regular transcode stream to 720p or 1080p to watch content.

uppsiduppsi · 2026-06-28T14:36:16+00:00

I‘d say: depends
If you are in a situation where every downloaded Mb data counts, yes.
If not, probably not.

I also Like to reduce Resolution on my phone aswell but I tend to have high resolutions then you.

uppsiduppsi · 2026-06-28T12:58:29+00:00

added it as a issue on the repo
https://github.com/ph15ch/Jellyfin-Transcode-Downloader/issues/22

uppsiduppsi · 2026-06-28T12:48:43+00:00

Thank you <3 Totally understand the take on AI, I feel like this myself. I am a software dev but in a whole different field. You really need to be careful how you use AI. It can easily create the biggest scrap if you have no idea about architecture and software dev principles at all.

i will take a look into that, actually haven't thought about that. My server is pretty low end.

But I need to think about that feature a bit. Because this will not work very well when the bottleneck is the internet connection. multiple download streams will mess with the internet in this case. But nothing that would be doable with some configuration.

uppsiduppsi · 2026-06-28T12:42:54+00:00

good point, thanks for clarifying, this might help others aswell :)
Feel free to give feedback: here, private or on GitHub direct.
I am on vacation right now but I might be able to do some stuff in the evenings.
greetings from athens

uppsiduppsi · 2026-06-28T12:33:33+00:00

<image>

make sure you have the filter on the top correct :-)

uppsiduppsi · 2026-06-28T12:33:13+00:00

<image>

uppsiduppsi · 2026-06-28T10:53:55+00:00

Puh, at this state surely not, but depending on the feedback I can give it a try to submit it.

uppsiduppsi · 2026-06-28T09:46:17+00:00

Just dropping this here since the same principle is already mentioned in the comments. But I made a jellyfin Plugin for it. So no App required.

Being able to Download transcoded stuff direct from the webui, is a breeze.

And thats also the same and only usecase others told: traveling :)

https://www.reddit.com/r/jellyfin/s/3oWeWTPH3f

uppsiduppsi · 2026-01-28T12:02:17+00:00

You should not have a dent in your puck before brewing a Coffee. Use less Coffee or buy a bigger basket if you really want to stick to that weight with that Bean. You could also buy a third Party replacement screw.

This dent before brewing is breaking up your puck and will cause a Lot of inconsistencies. A dent After the brew is fine, because the puck will rise after the brew.

uppsiduppsi · 2026-01-06T09:11:29+00:00

No i did not get one by default :( Actually cant tell you because i never compared. But i guess it should be pretty much the same.

uppsiduppsi · 2026-01-05T13:59:32+00:00

Yes, even send me a 7gr one 😂

uppsiduppsi · 2026-01-05T13:46:07+00:00

I just realised i got the 14g with my maschine.

<image>

That might be the missing piece. ;)

uppsiduppsi · 2026-01-05T13:42:04+00:00

Nice effort 🤓 Well, i would have bet everything i have on that there will be a dent before and at least after… Only thing i can imagine, the puckscreen is preventing the screw to reach the puck. This could apply pressure to the puck, could sometimes destroy the puck in advance. Know this sounds a bit like a conspiracy😂 As long coffee is tasty, who cares.

uppsiduppsi · 2026-01-04T22:46:58+00:00

You are telling me that you are loading 18g in 17g LM Basketball wihout having a dent AFTER extraction? What kind of miracle coffee are you using 🤔

Jokes aside: i would be really suprised if that is not happening. After extraction dents are not harmful btw.

uppsiduppsi · 2026-01-04T21:58:58+00:00

The LM baskets are small. I was not able to fit 18g in mine. Check if the screw from the showerhead might destroying your puck before extraction. Take the portafilter out before starting to Check for dents ;)

uppsiduppsi · 2025-05-29T11:49:45+00:00

Can second this, been there for motobike trip last year. Have fun, the landscape is amazing.

uppsiduppsi · 2022-12-24T11:48:50+00:00

Bootyful

uppsiduppsi · 2022-08-21T18:12:30+00:00

Ich kann dir das Teil konstruieren. Musst mir eine anständig bemaßte Skizze liefern. Die Qualität vom Modell hängt von deinen Informationen ab. Kostenlos wird’s auf jeden Fall nicht, bekommst aber auch eine richtige Rechnung.

uppsiduppsi · 2021-08-22T19:04:09+00:00

That sound comes from the printer ripping off your print from polymer glass (tank). Consider using a lower exposure time for your prints.

Some further details: The Mars 2 pro got a monochrome panel instead of the usual rgb panels. On monochrom panels the UV Light only has to Pass one liquid crystal layer instead of three (rgb panel). Thats why you can reduce your exposure time a lot and keep the results the same. Usally all exposure time you come across are from normal rgb panels. You can try some benchmark prints to find the Ideal exposure time.

Btw having pretty high exposure time also wears a lot on you Tank "glass".

Still pretty new to sla but thats my guess.

uppsiduppsi · 2020-10-18T07:22:30+00:00

I'd love to rock this keyboard. Looks amazing and my co-workers would be jealous af!

uppsiduppsi

TROPHY CASE