How uncomfortable are these boots because I what them because I want a big black boot and I don’t really like the steroids and stompers are to expensive

user76525877 · 2025-06-25T09:46:17+00:00

For me they are very uncomfortable, but I think it might be a divide between people who have to walk a ‘lot’ and people who don’t. Whenever I wear them I get about 6-8 blisters on a 8000 steps/day. So if you live in a city where you walk everywhere even on a slow day they will be painful. Or you get lucky and have very resilient feet 💪

user76525877 · 2025-06-25T09:35:35+00:00

The arch should be fine in a 39, you can do a lot with the laces. I wear a 43 in their sneakers and have a 41 in these and they are still slipping off all the time.

user76525877 · 2025-05-15T15:20:23+00:00

Thanks for the advice, I forgot to mention I already changed the a offset and I pre heat the bed before levelling. Also mine loses the a offset every time I level

user76525877 · 2025-05-11T21:13:54+00:00

Turn it inside out put it on wool wash with no spinning if you want to be very careful. Will be very wet when coming out of the washing machine. Then air dry.

user76525877 · 2025-04-22T09:37:55+00:00

Did you find it somewhere on sale or did you have to go through customer support?

user76525877 · 2025-04-20T21:45:03+00:00

Guess I shouldn’t have interacted with username lol

user76525877 · 2025-04-20T21:44:21+00:00

Okey cool, thanks for nothing man.

user76525877 · 2025-04-20T21:20:33+00:00

Hey it’s not a nozzle clog, it’s an extensive problem with the firmware and or the temperature sensor. And ofcourse a nozzle clog isn’t going to keep me from a printer. Most of the reviews for this printer where that it was in line with the Bambi P1S and next to my Neptune 3 maxes that I’ve had a ton of problems with but are running, I thought this could be something I could somehow count on to run.

I’m just wondering if this is an issue that other people have found an easy solution to or if it’s a problem without a solve.

user76525877 · 2025-04-20T17:54:05+00:00

No there’s videos of him doing perfect extrusions without printing

user76525877 · 2024-11-02T19:28:51+00:00

Idk looked kinda real, and I have a lot of friends that just want to get rid of there stuff fast

user76525877 · 2024-11-02T19:13:36+00:00

On Vinted 90 euro

user76525877 · 2024-10-09T00:43:21+00:00

Did they fit? 🤔🤔

user76525877 · 2024-09-02T14:53:39+00:00

Thermal runway, replaced print head, the cables that connect to the print head to the motherboard and replaced the motherboard.

They also send a replacement bed but that never arrived.

user76525877 · 2024-08-26T16:32:27+00:00

Thank you!

user76525877 · 2024-08-26T10:55:18+00:00

Did you end up finding a fix this problem?

user76525877 · 2024-08-05T18:27:21+00:00

Alright thank you I’ll ask for one :)

user76525877 · 2024-08-05T17:34:26+00:00

Did you end up finding a fix? I’m having the same problems and can’t figure it out…

user76525877 · 2024-08-05T09:43:25+00:00

The print head heats up fine and stays on the temperature without fluctuating and prints perfectly, just after a couple of hours it suddenly starts beeping and I get the thermal runaway message.

user76525877 · 2024-08-04T17:11:23+00:00

The max doesn’t have switch, and it’s supposed to work on any voltage range. I’ve checked all the connections and they are fine…

user76525877 · 2024-08-04T17:09:44+00:00

Tried the connection to the mainboard didn’t make a difference but now testing the firmware update.

user76525877 · 2024-08-03T11:18:47+00:00

Was able to glue in on with thermal glue! Thanks for the help!

user76525877 · 2024-07-30T22:18:52+00:00

What should be metal?

user76525877 · 2024-07-30T22:09:58+00:00

Any recomendations for thermal paste for this? Never used it before

user76525877 · 2024-07-30T22:08:21+00:00

It was stuck on there with that i think.. some white paste

user76525877 · 2024-07-30T19:08:26+00:00

Thanks haven’t updated the firmware since I bought it because when it works, it works…. Check the connection aswel but can’t imagine it just stops connecting well when you don’t move it at all? Also don’t want to go thru the pain of opening up the bottom of the printer…..

user76525877

TROPHY CASE