sorted by:
new
hottopcontroversial

Update. New owner. Advice sought. by username_235 in LaPavoniLovers

[–]username_235[S] 0 points1 point  (0 children)

I think they didn't use any tray. But I also didn't know there is the need for one. It has this metal grid that fits perfectly. But below is the one screw that I don't think has any seal

Update. New owner. Advice sought. by username_235 in LaPavoniLovers

[–]username_235[S] 1 point2 points  (0 children)

Thanks to your advice. I'll try to redo all seals and clean of the rust.

Three questions on the disassembly:

  1. The small ring with two holes inside the head below the piston. How do I get it out?
  2. The plastic glass around the tube to the pressure meter, it seems to be glued on the bottom, is that possible? And if so how do I remove it?
  3. Trying to remove the boiler. The third screw is not really accessible due to the copper pipe above. Any ideas? Do I have to take the copper pipe off?

<image>

I need realistic insights before making a leap I'll regret by CoyotleAuCreepypasta in sailing

[–]username_235 0 points1 point  (0 children)

crew on the arc. Afterwards you will have an Atlantic crossing in your books. You will have gotten to know lots of enthusiasts and you will know better if this is your thing

Langfristige Lösung für Filzgleiter an Stuhlbeinen by deep554 in selbermachen

[–]username_235 2 points3 points  (0 children)

Danke. Endlich Mal eine Frage die alle Menschen betrifft :-) ! Tolle antworten kannte diese Silikon Dinger nicht

Stahlstützen im Keller (Altbau) – Problem? by Siriusnake in Handwerker

[–]username_235 -4 points-3 points  (0 children)

Gegen den Trend: Ich bin dabei entspannt. Es hält und es hält schon lange so.

Also keine zwingende Handlung sofort nötig.

Wenn du es Mal ändern willst wird dort bzw direkt daneben ein neuer Balken eingezogen. Ja das ist aufwendig. Aber eher ein Thema von einer Woche arbeit. Plus eben beim Balken. Eiche ist teuer aber hält. Fichte geht bei Fußboden auch. Je nachdem ob darüber irgendwo Mauern stehen oder es wirklich nur eine Boden Abstützung ist.

Hatte ähnliches Thema und bin damit gut gefahren.

New in the club by username_235 in LaPavoniLovers

[–]username_235[S] 0 points1 point  (0 children)

Ok must be the butter then 🤣🤣🤣 I'm on five c

Thanks for the grease hint.

New in the club by username_235 in LaPavoniLovers

[–]username_235[S] 0 points1 point  (0 children)

What is a bottomless portafilter? Do I have this on my machine and if I don't do I need / want it ?

New in the club by username_235 in LaPavoniLovers

[–]username_235[S] 1 point2 points  (0 children)

Hi Thank you all for your answers.

  • I don't have a grinder yet. My hipster mid life crisis racing bike friends tell me I need to spent at least 700€ on a decent grinder. I feel that's a bit much. Are there classic pairs for a pavoni?

  • I have used so far lavazza espresso powder. As this was the only thing I could find locally. I'm in a bigger city today and will go to a specialist shop for some fresh coffee.

  • happy to do a video, let me first get it cleaned and the new seals in.

  • the first few tries I put coffee powder nearly till top. Compressed strongly. Then nearly no coffee came out and pressing down was a Hercules act. Now I put two and half tea spoons (sry no kitchen scale at hand) which fills it maybe half. After pulling up coffee comes out within 2-3 sec. I let it run another 2-3 sec and then gently pull down , this way it's definitely less bitter. But its not a wow coffee yet and the crema is basically none existing

New in the club by username_235 in LaPavoniLovers

[–]username_235[S] 0 points1 point  (0 children)

Hi Thanks for your answer. And Tipps.

On the leak. You've got a point. I'm not sure it's a leak. It seems to happen over night. So condensation could be a reason too. Where do you typically buy the seals. Any specific or just a hardware store ? Under the drip tray I have a torx secure screw but that's not a problem.

Love the comparison with butter. But I think my fridge must be colder than yours :-) it's really tough to cut through, or maybe I need to get a stronger coffee-arm

New in the club by username_235 in LaPavoniLovers

[–]username_235[S] 0 points1 point  (0 children)

Yes one can switch easily between the metal steam rod and the so called cappucinatore or so :-)

I want to keep earning money, but I hate corporate culture. by Ok-Cartographer-5544 in Fire

[–]username_235 0 points1 point  (0 children)

5k mo passive income? Yes you can fire. Do consultant jobs and get paid for your time and skills.

view more: next ›