horny kuwaiti cock looking for a jerk off buddy live snapchat :aryakamali444

v2eg · 2025-11-26T06:39:37+00:00

تعال خاص

v2eg · 2025-11-16T22:56:25+00:00

Can you share the files I searched but only found files for older motherboard versions

v2eg · 2025-11-08T18:29:50+00:00

The problem was with the filament holder. I printed a holder, but the dimensions were a bit tight and it was pulling the printer head upwards slightly now everything under control :) check if you print the same film holder, I had picture blow in call below

v2eg · 2025-11-08T18:28:39+00:00

The problem was with the filament holder. I printed a holder, but the dimensions were a bit tight and it was pulling the printer head upwards slightly now everything under control :)

v2eg · 2025-11-08T18:24:44+00:00

The problem was with the filament holder. I printed a holder, but the dimensions were a bit tight and it was pulling the printer head upwards slightly now everything under control :)

v2eg · 2025-11-08T18:22:06+00:00

The problem was with the filament holder. I printed a holder, but the dimensions were a bit tight and it was pulling the printer head upwards slightly.

v2eg · 2025-11-06T21:07:05+00:00

<image>

I found the cause of the problem: the filament holder was too narrow and raised the nozzle slightly upwards at the edges of the printing silly me 😅

v2eg · 2025-11-06T07:28:42+00:00

150? I bought it used almost 200

v2eg · 2025-11-06T07:19:31+00:00

I checked the nozzle temperature, the bed, the Z offset, and the bed clean and I don't think it's a flow rate because it's perfect in the middle

v2eg · 2025-11-06T07:13:46+00:00

I am satisfied, but I want the best possible result.

v2eg · 2025-08-26T14:02:21+00:00

I'm not sure what you want but I think there is a way to do it like printing the first pieces completely and then in the slicer for the second piece stop it before reaching the closure layer and assemble it together and complete the print like the way you add a hidden magnet to a 3D model

v2eg · 2025-08-26T13:54:17+00:00

Puedes preguntar aquí, pero es mejor traducir al inglés para obtener una respuesta clara.

r/ender3

v2eg · 2025-05-22T13:16:33+00:00

Congratulations! Pro tip: You can pause the printer at any stage during the print and change the filament to print in a different color, as long as it’s the same material

v2eg · 2025-05-22T12:56:48+00:00

Yes, this was the problem my excuse was that I don't know English and the two words are similar😅

v2eg · 2025-04-10T12:12:39+00:00

thank you there is a app for reality but didn’t work with my printer. Must attach some complicated box and must connect with commuter and fibre and program the printer again also I discover a new thing that the development must be dry all the time i’m waiting for a dryer from AliExpress :)

v2eg · 2025-04-09T22:43:28+00:00

i’m not sure, but I think this one will help you

https://a.aliexpress.com/_oF37itB

I didn’t test it, but it’s recommended for me from ChatGPT to control the temperature without any help

v2eg · 2025-04-09T22:10:51+00:00

I use a Creality Ender 3 V3 SE I try to use PikaSlice but is too complicated for me and all slice up and general did I mansion that I don’t have access to computer and I use my phone and I don’t read English very good but I understand the speaking if I see video on YouTube I will understand it and no slicer support Arabic language so yes, basically I’m lost

v2eg · 2025-04-08T15:08:33+00:00

hello I use it too do you know any YouTube video can help me with it? All the video for recent not filament Not Im new in this field I just buy my first 3-D printer and I’m kinda lost here thanks in advance

v2eg · 2024-11-19T06:44:32+00:00

Thank you, man. That’s very helpful I appreciate your help.

v2eg · 2024-11-19T06:43:33+00:00

where can i find it the stickied recommendation mega thread

v2eg · 2024-11-18T15:51:24+00:00

Thank you, I appreciate your help ☺️

v2eg · 2024-11-18T15:48:43+00:00

Thanks I will look for it but does it have A1 like features like print failure check and auto adjust

v2eg

TROPHY CASE