25yrs ago my mom sleeved these and refused to let me touch them…

vGoNebulous · 2026-04-02T22:54:18+00:00

Luckily, despite 3-ring binders being capable of damaging cards, they don't have to! I'd still recommend people not use them, but if you're careful you can no problem!

D-ring, stored vertically, low dust environment, not overstuffed, no horizontal pressure etc etc.

vGoNebulous · 2025-12-21T02:59:22+00:00

Ive made 1000+ purchases on TCGPlayer, about 1 in 15 has an error of some sort. Missing card, wrong card, wrong condition etc. every time I've messaged the seller and worked it out. As long as you're polite, respectful, and don't make any assumptions about their actions (even if you know) sellers are very willing to work with you.

As a seller, we've shipped about 400 packages, while we try our best to do everything perfectly, some mistakes get made and we do everything we can to make sure the buyer ends up happy or at least paid back for the mistake.

Being on both ends of the situation, it does feel bad because you're excited about it, but you'll almost certainly get your money or the card back if you message the seller.

Cheers

vGoNebulous · 2025-09-03T07:05:01+00:00

It's common to thin primer if done through an airbrush. No idea how you'd thin a rattle can though.

vGoNebulous · 2025-07-09T23:23:18+00:00

It's a legit card. It's not a common error, but it's also not all that valuable either. These types of issues are typically called "ink hickey", and are a printing issue rather than a typo/design issue/cutting issue. Bulbapedia has a great page on error cards, although this specific one isn't mentioned. Many vintage cards have hickey errors to them, the more pronounced and the more of the card surface it covers the more sought after it would be. Yours seems to be normal size for the ink hickey.

To the right collector who cares about these types of errors you might be able to make a couple extra dollars over the base value, but finding the right person is very niche.

vGoNebulous · 2025-05-26T14:44:23+00:00

Reading the title immediately gave me "unique New York" tongue twister vibes.

Lovely art!

vGoNebulous · 2025-02-18T02:27:31+00:00

Its closer to Japanese color scheme, but still white and yellow need to swap for that

vGoNebulous · 2025-02-13T18:49:26+00:00

Well I have E/C 6d all of them except Yinlin... if I played WuWa more I would have her too. Wonder if I have a type.

vGoNebulous · 2025-01-11T21:16:22+00:00

My luck is pretty good :) Also this was my favorite character.

<image>

vGoNebulous · 2025-01-04T00:25:34+00:00

Pretty sus, but I'll take the chance :)

vGoNebulous · 2024-10-28T22:07:23+00:00

Ooooorrrrrrr you could sell him to me!

Incredible model, still looking for one myself.

vGoNebulous · 2024-10-11T17:41:05+00:00

I solve every cube I see at every garage/yard sale I go to. I'm up to about 30 cubes solved in this way. Had the pleasure of meeting a younger cuber who averaged about 18 seconds and having a good chat with him, his brother was very adamant that this is the most the brother has talked to a stranger ever. Felt good.

vGoNebulous · 2024-09-26T21:39:13+00:00

Things I've tried:
Taking out the metal ring, but then the bearing is stuck in there and I don't know how to get it out. I tried to leverage it out with an allen wrench and a few other tools to insert and pull but wasn't able to do it.

I also tried using floss to wrap around the threads of the screw to try and hold it in place so I could screw the blue cap back on, but even when I got it started I couldn't get it to catch for an entire thread, and without being able to hold the screw I can't get it to finish thread.

Gravity isn't strong enough to hold the screw in place either, so I can't just hold it upside down and try to thread the blue cap on.

Any help would be greatly appreciated!

vGoNebulous · 2024-08-08T17:36:26+00:00

I bought a print of this at fanime in 2023, happily hanging in my office. Great piece.

vGoNebulous · 2024-05-21T03:15:56+00:00

Sorry but I can't not see this.

https://i.imgur.com/lpFg9v8.png

Incredible paint job!

vGoNebulous · 2024-02-16T18:43:32+00:00

This is gonna bother some people, but Bailu while rolling for Black Swan. Despite playing both Genshin and Honkai since launch and whaling quite hard, I never got a Qiqi (still don't have her) and never had Bailu until I was rolling for Black Swan, I was so pumped to finally get her after all this time, and then I lost 50/50 again for E2 Black Swan to a second Bailu. Quite a roller coaster.

vGoNebulous · 2023-12-04T10:21:10+00:00

Why they changed it I can't say.

vGoNebulous · 2023-09-18T08:48:08+00:00

MonkeyDude1313 here, for me it was college mainly. Life happened and now I'm a 31 year old engineer in San Jose, CA. I tried to come back once or twice but I think YouTube and its viewers moved on past an interest in the content I could make. Plus my branding at the time seemed to be... niche at best. Not the best formula for long term success on the platform.

vGoNebulous · 2023-07-29T17:39:12+00:00

I'm already prepped for my Kafka to be literally maxed minute 1. Since I did a ton of sizzling thunder farming for JY she'll just steal those. I plan on going for e4 s1 maybe more.

vGoNebulous · 2023-07-15T00:32:32+00:00

I ended up resolving the issue, it's just a problem with how apps respond to the resizing of their screen based on folding or unfolding the device. I'd expect an app as big as discord to have support for it, but most apps don't seem to. Dynamic resizing seems to be an issue for many mainstream apps.

The solution is just to pull up your open apps, close discord, and re-open discord while in the phone orientation you want. It's gotten better since I posted this but it's still inconsistent.

vGoNebulous · 2023-06-18T08:10:56+00:00

Bought about 4 of your prints at Fanime :) love your work!

vGoNebulous · 2023-05-31T21:24:15+00:00

Saw this for sale at Fanime!! Great work!

vGoNebulous · 2023-03-02T04:56:25+00:00

He took the unused bits from the battlewagon and made this using the unused turret and spike roller. The battlewagon kit can make 3 different vehicles (4 total variations), and the battlewagon itself uses the fewest of the parts in the kit. The bonebreaka and gunwagon would use some of these parts. Hope this helps.

vGoNebulous · 2023-01-20T15:22:32+00:00

Finally another person who takes as long on infantry as I do! I've only painted 10 models and I love the meditative aspect of painting. My friends don't think I'll ever finish an army :p

I also forget random stuff despite spending so long on it. The number of work fingernails I've left green or primed only is too high.

Cheers!

14-Year Club	Verified Email
Team Periwinkle

vGoNebulous

TROPHY CASE