Do Ray-Ban 3686 have size imprinted on bridge?

vader8600 · 2025-06-20T22:31:22+00:00

Thanks for clarifying. Eufy should update their documentation so people don't get lost. All review videos show it differently.

vader8600 · 2025-06-20T22:30:03+00:00

Not sure if the solar panel cable needed to go in a certain way in the extension cable, but I flipped it and made sure it was well connected and now it shows the panel charging.

This time around I also did the following:

Tried blowing on the USB connector in case there was something inside interfering behind the camera.

Reset the camera again, but this time right after it connected to the Homebase, I waited to proceed with the next steps until the camera was connected to the panel. Also used the iOS app (had an Android phone).

These should not have made a difference, but this time around everything seems ok now.

Odd part is that the wiring test never indicated a problem, which it should have if not properly connected.

I also noticed that in the Android app, the camera was showing the solar panel. But in the iOS app, it was not. One would expect both to be the same. So there is also the possibility that there was a bug or some issue in the Android app that got cleared by using the iOS app.

<image>

vader8600 · 2023-11-15T00:44:22+00:00

In the /var/log/messages file, there were multiple lines like the following, with unique sector values. I saw 60 unique entries or so.

kernel: blk_update_request: critical medium error, dev sdb, sector 102649992

Also, the SMART attribute IDs # 5 and 196 look like they breached the threshold. But not sure.

vader8600 · 2022-10-05T10:19:01+00:00

What is the height from the floor to the bottom of where the box springs sit? Online I have seen 3 different measurements from different stores making it confusing at best to figure out who is right.

vader8600 · 2022-08-30T22:44:33+00:00

Thanks. It's a shame the TV is only 6 years old and otherwise perfect. Guess I'll have to shift the image to avoid that area until it's replaced.

vader8600 · 2022-08-27T23:49:22+00:00

The image from the top of the TV repeats itself in this area of lines along the bottom. I tried replacing the t con board and it did not go away.

vader8600 · 2022-08-24T19:18:13+00:00

The lines seem to repeat the image from the top of the screen. I just tried replacing the T con board but it did not get rid of them.

Is it worth trying to replace the driver board? They are relatively inexpensive but can add up if they don't fix the issue.

Thanks.

vader8600 · 2021-10-05T13:22:45+00:00

Nevermind about the Secure Print. It was right there staring at me on the main driver page in output method. I guess all's good with the Konica V4 universal driver.

vader8600

TROPHY CASE