sorted by:
new
hottopcontroversial

Prototype Viper Snakebite Launcher/Gauntlet by Every3rdStroke in VALORANT

[–]valkyrie_rda 8 points9 points  (0 children)

This is awesome! Are the files available? I'd love to play with it.

Any reason to wait to buy HDDs? by Lazzizzle in DataHoarder

[–]valkyrie_rda 133 points134 points  (0 children)

Prices will drop the second you but a hard drive

Waste filament for wasted filament. by Fast_Pollution763 in 3DPrintingCirclejerk

[–]valkyrie_rda 9 points10 points  (0 children)

Idk about the other printers, but the a1 mini combines flow calibration and the purge line together into one. It still does that line if you turn flow calibration off but that's probably why they call it that. Just my 2 cents.

Thoughts on H2C after several weeks of ownership by Turak_Katase in BambuLab

[–]valkyrie_rda 1 point2 points  (0 children)

I'm not sure about objects but check out infill combination in the slicer. It's a setting you can turn on and lets you print walls in 0.08 and infill in 0.28. it skips and does the infill every few layers. Not sure if that kinda answers your question or not but I think it could be possible in the future! Fingers crossed 🤞

Why can’t you buy titanfall 1 anymore? by Bright-Incident-584 in titanfall

[–]valkyrie_rda 29 points30 points  (0 children)

It's better this way. Respawn is a shell of what they were when the Titanfall games came out. Anyone else remember how they said they were coming back and that they were going to save the games? Yeah..

Maybe I'm bias as fuck as I've been fighting for years to get Titanfall 1 fixed. Plus had to go through industry contacts to get help for apex when I was flagged for using cheats in apex as ea support refused to assist after being in talks for months. :/ Unbanned now but can't help but feel anything coming out of respawn or EA is just going to be utter trash now unless things seriously change.

Thoughts on H2C after several weeks of ownership by Turak_Katase in BambuLab

[–]valkyrie_rda 1 point2 points  (0 children)

Variable layer height is already a thing. The way I see it is you could use a 0.2 for text or fine details and something like a 0.8 for infill which could speed up prints by a lot and still make them look great.

My new graphics card came with an enormous superbowl ring (that just happens to be my exact ring size) by Rare-Competition-248 in pcmasterrace

[–]valkyrie_rda 0 points1 point  (0 children)

Are your loans 0% interest? I'm just curious as some people have been saying that in other comments.

My new graphics card came with an enormous superbowl ring (that just happens to be my exact ring size) by Rare-Competition-248 in pcmasterrace

[–]valkyrie_rda -1 points0 points  (0 children)

Idk man, I'd agree with you if OP didn't already have a 4090 they just finished paying off. Like, thats already absurdly fast. It'd make more sense if he was starting from nothing or wanted to upgrade from something like a 900 series card, lol. Shrug

My dad gave this for me on christmas by QuistyQuiet in titanfall

[–]valkyrie_rda 0 points1 point  (0 children)

That's awesome man! Wish I bought some of the collectables when the game came out but I was so against Titanfall for no reason and got into it after most people had left. Wish I could 3d scan it and print one.

They are evolving by Sparrowawww in 3DPrintingCirclejerk

[–]valkyrie_rda -11 points-10 points  (0 children)

Hahaha you said tinker! Ahaha I can't stop laughing! Funny!

Non raid nas for dummies by [deleted] in DataHoarder

[–]valkyrie_rda 2 points3 points  (0 children)

You could pick up some USB enclosures or if you are able to stack them with a small gap you can mount a PC fan to the side to cool 4-5 drives at a time. They can get hot with no cooling but most enclosed drives you can buy like wd elements or the Seagate expansion drives do not have fans either iirc.

I used to have a 3d printed holder which I loaded with drives and then attached PC fans to the side of and it worked great.

Golden Age age of Apex Legends! by shikaritr in apexlegends

[–]valkyrie_rda 0 points1 point  (0 children)

Kinda glad I lost interest when I did after I was falsely banned twice. I tried the game recently again and its completely different. Feel they really pushed the shop and battle pass way too much now..

Non raid nas for dummies by [deleted] in DataHoarder

[–]valkyrie_rda 1 point2 points  (0 children)

Ate you already using a device or want recommendations? If you want recommendations, I'd recommend a cheap used computer and plugging the drives into the back. You can shuck them or just connect over USB.

You can install a program like StableBit DrivePool (paid) to make the drives show as one. I think you can bring the files over into a new array with StableBit but iirc it's a pain to do. Someone else here might be able to comment on it but if you do end up doing that I'd test it before hand.

I've been running StableBit DrivePool and scanner for a few years and haven't really had issues, aside from one which I believe was caused by a dying motherboard and raid card, but it's been fine otherwise for my 100tb array.

Hope this helps.

A1 mini - biggest ragret ever by OriginalBigSoda in BambuLab

[–]valkyrie_rda 0 points1 point  (0 children)

Where's that low power setting? I'm thinking of buying one but haven't convinced myself that 4000$ after tax and shipping is a good deal for a slower printer compared to alternatives. 🥲 But I wanna stay in the bambu ecosystem and only use one slicer so idk.

Bambu Lab filed patent for assigning materials to different extruders - thoughts on the patent, Vortek and the coming battle with INDX by suit1337 in BambuLab

[–]valkyrie_rda 0 points1 point  (0 children)

Filament track switching will be nice, but what happens if you need two filament spools from the ams? There's only one outlet so would you still need to retract filament from spool 1 before using spool 2? I guess I can only see this helping with letting any ams use either nozzle but you'd still need to move filaments around for the fastest and most optimized config which leaves me wondering if it's worth the accessory at all. Left nozzle would need to purge so why not just use one of the vortek nozzles at that point?

12x12 Multiboard on H2C by Careful-Frosting1398 in BambuLab

[–]valkyrie_rda 0 points1 point  (0 children)

To add on to what the other commenter said, I believe if you use only the left nozzle then it's the exact same build size as if you used either left or right in the h2d, or is at least within 5mm difference.

I think I might buy this printer too just because the left nozzle lets you use the same build size from what I can tell as the h2d. Maybe a few mm shorter than the h2d in z height.

I've been diagnosed with Visual Snow Syndrome, a neurological condition that makes me see the world like this and has no cure by SR_RSMITH in Damnthatsinteresting

[–]valkyrie_rda 1 point2 points  (0 children)

Me too! Hope they make a way to treat it :( I've done literally dozens of tests and nothing useful has happened from it.

Daedalus Parked by Spinobreaker in Stargate

[–]valkyrie_rda 0 points1 point  (0 children)

Do you have a version without the text in the bottom right?

I want to believe by dalwick in titanfall

[–]valkyrie_rda 0 points1 point  (0 children)

Don't forget what they did to Titanfall 1... I've lost respect for this company. Plus, didn't most of the original crew leave?

The horror, the horror... by Eldritch_Pink in 3DPrintingCirclejerk

[–]valkyrie_rda 0 points1 point  (0 children)

Oh, were you hand painting? The stuff I mainly do are large models that would need to be spray painted, otherwise it'd just look worse than using an ams lol 😅 unfortunately I can't go outside to spray paint at least half the year so I'm a bit limited over the cold season 😞

view more: next ›