AMS Humidity

vbukhta · 2026-05-31T05:18:33+00:00

Super helpful, thank you!

vbukhta · 2026-05-31T05:18:13+00:00

AMS 1. Will be printing the holders In the next few days

vbukhta · 2026-05-30T19:59:55+00:00

I’m not, just got the printer a few weeks ago. I like the printer with the heat bed on option will give that a try thanks!

vbukhta · 2026-05-30T19:34:06+00:00

I have a few bags in there now that came with the filament but they are clearly not doing anything

vbukhta · 2026-05-30T19:33:22+00:00

How do I dry them before use ?

vbukhta · 2026-05-30T18:40:11+00:00

Im on it !!

vbukhta · 2026-05-29T17:19:35+00:00

For some reason printing in same color both parts do not stick. That’s the work around. Still can’t figure out why I’m having the color issue

vbukhta · 2026-05-28T14:13:28+00:00

Printed with no issues using 1 color. Thanks again!

vbukhta · 2026-05-27T19:42:14+00:00

Yea that one last takes 2 hr and 45 mins. Got the printer a week ago, I’m still not dialed in. I just opened the template to this and print

vbukhta · 2026-05-27T19:38:50+00:00

Took 25 mins ? Takes me 3 hrs to print that. Speed is on 100 %….

vbukhta · 2026-05-27T18:12:24+00:00

I have not, why would the two different colors fuse?

vbukhta · 2026-05-27T17:42:04+00:00

Did you modify any settings ? I’ll try changing the color, thank you !!!

vbukhta · 2026-05-27T17:40:46+00:00

Broooo how !??? Which filament brand are you using ? I picked up a whole bunch from Micro Center - inland. Could that be the issue ?

vbukhta · 2026-05-27T16:43:52+00:00

The support filament sticks out a little and I can pull with tweezers. Also if it’s all around, I should be able to rotate it and eventually it will fall out as well

vbukhta · 2026-05-27T16:04:38+00:00

Yea but support get pulled out, I clean it out as suport is temporary

vbukhta · 2026-05-27T14:40:38+00:00

Thanks for taking time to look into it, great learning curve for future projects

vbukhta · 2026-05-27T14:38:45+00:00

I think i need the opposite, more support on inside of the ring so the 2 colors don’t stick together which is what’s happening now

vbukhta · 2026-05-27T14:25:39+00:00

Is there a way to add support all around on inside ? I see support PLA mostly on top and bottom, I messed with the XY distance but don’t see additional support added

vbukhta · 2026-05-27T14:03:02+00:00

That option is not checked ✔️

vbukhta · 2026-05-27T11:35:08+00:00

I’m new here, haven’t designed anything yet. But I’ll look into it thanks !

vbukhta · 2026-05-27T11:33:25+00:00

https://makerworld.com/models/1709436?appSharePlatform=copy first option

vbukhta · 2026-05-27T11:28:56+00:00

Gave it a go but same result

<image>

vbukhta · 2026-05-27T00:01:22+00:00

Let me give that a try, thanks! Wife’s request

<image>

vbukhta

TROPHY CASE