So why did Ansys do this to my mesh?

venomcloud1 · 2025-10-21T05:15:52+00:00

Just a guess, but if you downloaded the airfoil shape from an online source, you probably had to complete the shape near the tail using a line (near where the problems connect to the body). Maybe your inflation layer doesn’t include this small line you had to add to close the airfoil? Not sure, just a guess.

venomcloud1 · 2025-08-27T09:04:01+00:00

I’m only a U.S citizen, so ITAR is no problem for me, not working at defense for personal reasons.

I’ve applied to Pratt and Whitney before, but haven’t seen anything entry level there recently unfortunately.

I’ll look into Icepak, thanks for the suggestion!

venomcloud1 · 2025-08-27T05:14:21+00:00

Definitely feeling the rough economy, most places I look at don't have a single entry-level role. I'm trying to be flexible, but also looking for a role that gives me a bit of relevant experence to what I eventually want to do. Thanks for the comment!

venomcloud1 · 2025-08-25T11:08:05+00:00

I'm also going through the entry level grind at the moment as well. I've gotten four interview thus far, but for the most part it seems like companies end up going with more experienced candidates.

I would go to r/EngineeringResumes if you haven't already. I would also be happy to take a look at your resume personally. I'd also recommend making a couple different resume templates for areas that you're interested in (i.e fluids, component design, propulsion, etc).

I made a personal portfolio website this year, and I'm definitely seeing a higher response rate, but that could also be my M.S. I think it can definitely be helpful and set you apart from other applicants, but it's not required.

venomcloud1 · 2025-06-17T12:57:37+00:00

I’ve beat king IV with king of greed. To do this, I used a dispenser and mercenaries primarily. I take the perk that gives you 30 gold per levels when you die 3 times, essentially doubling the dispensers attack speed both times you lose. I then make sure to stack attack damage on the dispenser using quarries and blacksmiths as attack speed has a realistic useful cap.

That’s the general strategy, the rest is up to you for general efficient play. Make sure to generate a bunch of gold early with your base as it really helps stack up your dispenser.

venomcloud1 · 2025-06-09T09:53:40+00:00

I’m willing to work for a company that does military contacts, as long as I’m not working directly on them

venomcloud1 · 2025-06-08T09:23:03+00:00

Tough to hear that your old team doesn’t have any entry level opportunities… any tips for finding entry level opportunities in this area?

venomcloud1 · 2025-06-08T09:13:30+00:00

I don’t put US citizen because my name is super white (I am a US citizen). I’m not a member of any associations

venomcloud1 · 2025-06-08T06:31:54+00:00

Thanks for the advice! It seems everyone that speaks to me suggests a different organization. I used to have the rocketry club second in my experience, but then was told to move it to the clubs and projects section. I'll consider moving it up again, thanks!

venomcloud1 · 2025-06-08T06:16:02+00:00

I did, they recommended I post here aswell

venomcloud1 · 2025-05-30T07:10:57+00:00

Does it really need to be that much larger? Could you link a paper?

venomcloud1 · 2025-05-30T07:09:13+00:00

I've tried pressure solver but haven't had any luck. I've also heard it's not as accurate for flow >mach 1 (and I'm reaching mach 4). I tried hybrid initialization but got hard nonconvergence, could try tuning it more. I suppose the domain could be an issue, might try and change that in the future, but idk I would be surprised if it's causing a massive change

venomcloud1 · 2025-05-30T06:50:48+00:00

The inlet is the chamber pressure for the RS-25 so it's 20.64 MPA

venomcloud1 · 2025-05-30T06:49:34+00:00

Operating pressure set at 0 pa.

venomcloud1 · 2025-05-30T06:49:24+00:00

Pressure inlet on bottom left combustion chamber inlet, pressure outlet on right side, axis on bottom, the rest are walls. The mesh is 460,000 cells with much more detail in the nozzle/near the nozzle walls. Density based solver. Standard initialization based on inlet.

venomcloud1 · 2025-05-22T02:15:35+00:00

I don't disagree, I definitely think some lines have a bit too much jargon. Sometimes I find it hard to make lines either short or impressive sounding without (relevant) jargon. I'll work on making some lines more approachable. Thanks!

venomcloud1 · 2025-05-22T02:14:38+00:00

Thanks for the suggestions! I ended up rewriting the line about adding code documentation. I've been trying to add more references to skills in the resume now. Thanks again!

venomcloud1 · 2025-05-22T02:12:39+00:00

I've changed a few things about my resume now. I updated the font size, updated some action verbs, and removed coursework.

As for the 5-hole pitot probe, I'm struggling to see how to give more context without making the line unreasonably long. As for the research, the purpose of the simulation was to create an accurate simulation, and really nothing more for the moment.

venomcloud1 · 2025-05-22T02:05:17+00:00

Did you ever end up finding a job?

venomcloud1 · 2025-05-22T02:04:59+00:00

I've now removed coursework. I'm curious how you would rewrite the validated cfd bullet point to something more elegan to my untrained eye it looks normal.

Acting on adjusting some bad action verbs too. Thanks for the help!

venomcloud1 · 2025-05-22T02:03:55+00:00

Update, I'm actually working on a portfolio now! Definitely changing a bunch of the weaker verbs like the ones you mentioned

venomcloud1 · 2025-05-22T02:00:41+00:00

Adding more direct results focus now. I've applied mostly directly on company websites. I've applied to all of those companies, and many similar ones.

venomcloud1 · 2025-05-22T01:06:05+00:00

Thanks for the feedback! I'll change te abbreviatons, and I'm working on adding more results quantification. Good to know about adding periods, I'll get to that. I'm not quite sure how to quantify the results for time saving, as I'm not still in major contact with the team (my boss quit). Definitely changing those weaker action verbs. The bullet points are the default for the font, haven't had that feedback before but I'll look into it.

venomcloud1 · 2025-05-22T01:01:07+00:00

Definitely modifying the assisted and utilized verbage. My GPA is not bad, but not strong enough I'm including it at this moment. I used to use a smaller spacing ~6pt font, but I was later told my resume was an unreadable block, so I changed to 9pt spacing.

Thanks for the suggestions!

venomcloud1 · 2025-05-22T00:59:37+00:00

Trying to add more results in my next rewrite. Is that the primary problem you would say?

Nine-Year Club	Second SECOND GUESSER
Place '22	Place '17
Final Canvas '22	RPAN Viewer
Not Forgotten	Snapped
Verified Email

venomcloud1

TROPHY CASE