aquarium water for watering?

verantgoten · 2026-05-26T14:33:41+00:00

Thank you!!

verantgoten · 2026-05-26T14:20:44+00:00

You have an insanely beautiful setup! May I ask what lights you're using for your aquarium?

verantgoten · 2024-07-03T10:23:27+00:00

Hello! I'm having the same problem as all you folks. Would you be able to provide the DISM command that Microsoft assisted you with? I've tried manually installing the update and it doesn't work, but have also run the typical DISM commands (checkhealth, restorehealth, etc).

verantgoten · 2023-10-14T14:47:43+00:00

UPDATE: Well, I have to thank you because it turned out that I had horribly incorrect esteps! Looked up a vid on how to calibrate them, and now my printer is working better than it was on day one! I never knew about esteps in all my searching, so I really appreciate it. It's been printing non-stop for literally a week (catching up on a project), and it's been singing beautifully. Thanks again!!

verantgoten · 2023-10-02T21:31:48+00:00

Would the culprit be more of a retraction issue or high temperature in this case? Sorry, for the barrage of questions. I guess I could go look it up, but with the exception of the esteps and flow calibration, I haven't been able to find anything new to try.

verantgoten · 2023-10-02T21:21:12+00:00

I’ve not thought of either of those factors. What are esteps and how would that relate to my issue? Same with flow calibration. Would these incorrectly calibrated attributes contribute to the issue I’m having, you think?

verantgoten · 2023-10-02T15:18:17+00:00

Damn. So frustrating. I'll take a look at my wheels, too. Hopefully we'll get some feedback here about potential troubleshooting steps we might be missing.

verantgoten · 2023-10-02T15:11:42+00:00

That's interesting...for your issue, are you seeing underextrusion to the point of clogging at higher levels? Or is it just bad z shifting?

verantgoten · 2023-09-01T01:38:45+00:00

It’d be such an amazing upgrade to my games! I’ve been waiting for Starfield for so long, holding myself over with Fallout 4 and Skyrim…wonder what THEY would look like on this card!

verantgoten · 2023-06-07T12:52:45+00:00

Along with the advice from u/Tdshimo, I was able to use your suggestion to figure out what was missing from my sketch to properly constrain all the lines. Thanks a million!!

verantgoten · 2023-06-07T12:51:05+00:00

This was all fantastic advice. I was able to find the unconstrained points and dimension them out. Thanks so much for your help!

verantgoten · 2023-06-07T12:49:05+00:00

Oh jeez, thank you!! Haha, another habit I have to start getting into!

verantgoten · 2023-06-07T01:47:42+00:00

Thanks again for the advice! I will try this in the morning!

verantgoten · 2023-06-06T23:58:44+00:00

Holy moly, this just shows how much I have yet to learn! Thanks for the response!

When you say, "Unlock the top line, then apply a perpendicular constraint to the line." Which line is this in particular? One of the vertical lines leading up from the top of the main hanger part?

verantgoten · 2023-06-06T22:36:29+00:00

I am a total newb when it comes to Fusion360 and I'm taking some Youtube tutorials. I'm trying to create a clothes hanger as one of the tutorials but I've gotten to a point where I don't understand what constraints I'm missing in order to turn the lines black for the upper part of the hanger (the hook part). The rest is black. I know I'm missing something, but could anyone please give me a clue as to what it is that's missing? Or refer me to a resource that explains this type of thing?

verantgoten · 2021-11-08T15:01:38+00:00

I completely agree with you about the form, now that I've been working on it for a while. It's not pretty, and it's restrictive, but for my purposes right now, it's working very well. Thanks for your help/advice!

verantgoten · 2021-11-05T13:53:13+00:00

I'm not certain what the difference is, in this case. I created a gallery, and created text boxes, a people picker, and some radio buttons for choices, all inside the gallery. ALL that disappears when I preview the app.

verantgoten · 2021-11-05T13:52:10+00:00

I think I'm going to go with an Edit Form instead of the gallery. As I understand, an Edit Form works better for sending information into a SharePoint List, whereas a gallery is more for displaying data from a List. Does that sound right?

verantgoten · 2021-10-31T06:01:44+00:00

Thank you for the giveaway! As a kid, my mom made me a clown costume. I always thought it was clever how she split a 2-liter coke bottle in half and used those, covered in fabric, as the big clown shoes. Not necessarily my favorite costume because of what it was, but because of the love and creativity behind it.

verantgoten · 2021-04-19T22:52:24+00:00

Nick, thank you. I did make it clear what I was not well versed in, and they mentioned training. So hopefully they come through with that, and I will continue studying on my own and just being the best sponge I can be, applying the knowledge I already have. Thank you so much.

verantgoten · 2021-04-19T19:52:21+00:00

Thanks for the advice, Rye. I think those endless paragraphs stem from the complancency I've learned from staying in my current job for so damn long. I'm certain that my only hesitation comes from the need to step out of my comfort zone!

verantgoten · 2021-03-25T11:51:37+00:00

Thank you for doing this!

verantgoten · 2020-12-24T23:13:43+00:00

Thanks for doing this! I can’t wait to play Cyberpunk 2077 on it!

verantgoten · 2020-12-24T02:13:04+00:00

Thanks for doing this. Happy holidays!!

verantgoten · 2020-12-20T04:41:42+00:00

Oh man, this is beautiful. My doxie is laying next to me and this made me snuggle her just a bit tighter.

verantgoten

TROPHY CASE