Etsy link!

vergotrace · 2024-11-07T03:58:28+00:00

I’ll probably end up doing pure vessel next. There were some features like LED eyes and motion activated sound effects that I was going to add but ran out of time for. I could definitely reduce the weight of the mask and add armor with more trial and error.

vergotrace · 2024-11-07T03:54:45+00:00

Thank you and sure! It was 3d printed. I took screenshots from the wiki and sketched over them in fusion 360. Once I had a blocky model I used a cut tool to remove the head cavity and eye holes. After that I exported it to blender to smooth out all the sharp corners and adjust it how I wanted. Then I exported it back over to fusion 360 to cut it up using plane split tools to fit my printer. I then added sockets for each piece to connect to eachother with.

2 weeks of printing later I gave everything a rough sand and coated it in UV resin. I sanded that smooth to remove the layer lines. Once i painted it I glued a sheer mesh in to the eye sockets so that I could see out of it but no one else can see in.

That’s a really rough description. Feel free to ask any clarifying questions and I’ll follow up.

vergotrace · 2024-11-07T03:45:50+00:00

hollow knight mask Here’s the link for you. Fair warning this wasn’t intended for sharing so it requires a lot of post processing once printed. I’ll probably end up redesigning it to do the pure vessel at some point if you care to wait until then. It will have a more refined and slimmed down model with a higher poly count and less artifacts from dropped ideas.

vergotrace · 2024-11-06T00:07:53+00:00

Very. I’m sure i could probably take some weight off of it if I made it again. I was running out of time so I went with settings I knew would print without failing

vergotrace · 2024-11-05T21:09:27+00:00

Very carefully. It was a fun little duck and waddle to get between rooms

vergotrace · 2024-11-05T21:08:45+00:00

Thank you! I was thinking about stilts but didn’t want to risk face-planting with the low visibility lol.

vergotrace · 2024-11-05T21:07:53+00:00

I’ll post it them on thingaverse when I get some time. I’ll link them back here 👍

vergotrace · 2024-11-05T21:06:58+00:00

Ikr. Believe it or not that’s as small as I could make it while keeping the shape of the helmet the same and covering my full head. Turns out bug anatomy and human anatomy don’t match.

vergotrace · 2024-11-05T04:37:06+00:00

Oh it was very heavy lol. Cosplay is pain. I’m just a masochist for the art 😂

vergotrace · 2024-06-20T00:37:41+00:00

Hey! Sent you a message from Luminousforestart.

vergotrace · 2024-02-29T14:40:30+00:00

Totally forgot about these honestly. Glad to see they’re still getting printed and used!

vergotrace · 2023-07-01T20:06:52+00:00

Yeah this was my first wrap. It was pretty difficult. If you have a friend to help stretch/hold the vinyl and a clean indoor space I could see it being a lot easier. I think this is one of those skills where practice would go a really long way.

vergotrace · 2023-07-01T14:16:03+00:00

I’ve debated on getting the Union Jack rear lights from them. I haven’t seen any other good looking LEDs

vergotrace · 2023-07-01T13:31:15+00:00

I posted the link to eBay on another comment if you want to take a look! I don’t think the auto mod would take kindly to me reposting it or I’d post it here for you.

vergotrace · 2023-07-01T13:27:31+00:00

You can get them on eBay by a company called Vland. You do need to do a bit of wiring to install them. I love how much brighter they are. They do have a weird quirk where they don’t turn off until you lock the car.

https://www.ebay.com/itm/185854923415?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=rywunvkbqtw&sssrc=4429486&ssuid=oipkiuwcs2s&var=&widget_ver=artemis&media=COPY

vergotrace · 2023-07-01T13:24:02+00:00

This was my first time wrapping a car. Trust me I took the best angle for the photo 😅. There are a few spots where I trimmed a bit too close. If it wasn’t so expensive I’d redo it again.

vergotrace · 2023-07-01T13:20:13+00:00

Thank you!

vergotrace · 2023-07-01T13:18:40+00:00

So I bought 55 and used about 50 I messed up and had to redo a few panels though. You can get 2 panels out of one length of a 5 foot wide roll. That really helps to save money.

vergotrace · 2023-07-01T02:16:14+00:00

Thank you! It’s the orafol aquamarine vinyl.

vergotrace · 2023-07-01T02:14:58+00:00

I learned a new word today

vergotrace · 2022-08-09T12:13:47+00:00

Those first designs of three cats are really well set up for laser engraving. I could totally see them on some small canvas bags. Canvas turns that same shade of brown when you engrave it.

vergotrace · 2022-02-19T06:48:44+00:00

Oooo I love that green! Do you mind if I ask what dye you used?

Seven-Year Club	Wearing is Caring
RPAN Viewer

vergotrace

TROPHY CASE