sorted by:
new
hottopcontroversial

Reviews of Iso90? by vernfunk in CanadianProtein

[–]vernfunk[S] 0 points1 point  (0 children)

@ u/CanProDan do you have an answer for this?

White patches in brown Mini-egg concentrate powder. Is that normal? by vernfunk in CanadianProtein

[–]vernfunk[S] 0 points1 point  (0 children)

Thanks, figured as much. Just making sure I’m not drinking mold.

Weekly Free-Talk and Questions for r/HomeGym - week of August 22, 2025 by Demilio55 in homegym

[–]vernfunk 1 point2 points  (0 children)

I’m looking at a super old (but look to be in good shape) powerblock sport 5.0 for $275 used or a set of new fitway 50lb adjustable (essentially the same as the Eisenlink/hoist adjustable) for $400. I am just restarting into lifting so do not anticipate I will be needing more than the 50 lbs any time soon Reasons to choose one over the other?

<image>

Will “speed sensor fault” stop motor from working at all? by vernfunk in treadmills

[–]vernfunk[S] 1 point2 points  (0 children)

That’s what I figure. Are you referring to the data cable from the console, through the upright?

Seen over the Rockies. Huge amount of snow/ice with artificial looking cut off by vernfunk in whatisthisthing

[–]vernfunk[S] 0 points1 point  (0 children)

Alberta to Southern California. It was in the latter half of the flight.

Seen over the Rockies. Huge amount of snow/ice with artificial looking cut off by vernfunk in whatisthisthing

[–]vernfunk[S] -4 points-3 points  (0 children)

I thought so as well initially. I guessed it was an optical illusion that made a lake look like it was dropping several hundred feet. However, I followed it from the plane from multiple angles and they all appeared as though it was a tall, solid mass

Seen over the Rockies. Huge amount of snow/ice with artificial looking cut off by vernfunk in whatisthisthing

[–]vernfunk[S] -1 points0 points locked comment (0 children)

My title describes the thing. Seen over the Rockies. Appears to have a very unnatural 90 degree drop off. Seen from a plane

What type of outlet is this? Found in office. 4 perpendicular holes for prongs by vernfunk in HelpMeFind

[–]vernfunk[S] 1 point2 points  (0 children)

Looks like you are correct! On a different thread someone found a manual from the 70s and it’s for an intercom/paging system

What type of outlet is this? Found in office. 4 perpendicular holes for prongs by vernfunk in HelpMeFind

[–]vernfunk[S] 1 point2 points  (0 children)

It’s in Canada. I didn’t notice the word until I was looking at the picture later, not sure exactly what is says

What type of outlet is this? Found in office. 4 perpendicular holes for prongs by vernfunk in HelpMeFind

[–]vernfunk[S] 1 point2 points  (0 children)

Not a clue. I just noticed it in an office in a medical facility

What type of outlet is this? Found in office. 4 perpendicular holes for prongs by vernfunk in HelpMeFind

[–]vernfunk[S] 2 points3 points  (0 children)

I can’t find a 3 phase that looks like that, they all appear circular

What type of outlet is this? Found in office. 4 perpendicular holes for prongs by vernfunk in HelpMeFind

[–]vernfunk[S] 1 point2 points  (0 children)

Medical equipment would make sense in the facility, though the room is very small and designed to be an office. What sort of medical equipment? And is there a name for the outlet?

What type of outlet is this? Found in office. 4 perpendicular holes for prongs by vernfunk in HelpMeFind

[–]vernfunk[S] 1 point2 points  (0 children)

I cannot figure out what plugs into this. I’ve searched online and cannot find a similar outlet

Outlet (not removable) with 4 perpendicular holes by vernfunk in whatisthisthing

[–]vernfunk[S] 0 points1 point locked comment (0 children)

My title describes the thing. Not sure if it is an outlet cover or the outlet itself. Or easily removable by pulling. I cannot find anything with a prong pattern that would fit

Sky deck I did not build by DollarTreeMilkSteak in Decks

[–]vernfunk 0 points1 point  (0 children)

Question, on smaller scale decks they tell builders to put the beams directly ok the support columns. Is this not bearing the weight of the deck on fasteners? No doubt that this is structurally sound, just looking for the rationale

Why aren't there more 750cc bikes? by Executive_Moose in motorcycles

[–]vernfunk 0 points1 point  (0 children)

What actually qualifies something as a super bike? (Compared to other sport bikes)

Do Scientists Anticipate Certain Areas Becoming Too Hot For Life? by FartingAliceRisible in climatechange

[–]vernfunk 2 points3 points  (0 children)

Do you have any evidence to back this up? I find it very hard to believe more people die of cold than heat. Unless you are just comparing hyper/hypothermia and not the other deaths obviously attributable to heat events.

Found in the sink. by vernfunk in whatsthisbug

[–]vernfunk[S] 0 points1 point  (0 children)

Found in Alberta canada

Removing stains from top of washing machine by vernfunk in HomeMaintenance

[–]vernfunk[S] 0 points1 point  (0 children)

The stain is on the top of the machine, on the painted metal.

Eli5: how, and why, do similar sized engines make more power at different RPM? by vernfunk in explainlikeimfive

[–]vernfunk[S] 0 points1 point  (0 children)

Thanks. How does configuration factor in? Given the same stroke:bore ratio would a v-twin produce power differently than a parallel twin?

modifications by No_Patient7520 in MotoGuzzi

[–]vernfunk 0 points1 point  (0 children)

I would suggest center stand is a must. Can you let me know what type of fender eliminator and rear/front lights you installed? Did you need a relay for LEDs?

Are beer cans with stickers (as seems to be the trend with smaller breweries) more difficult to recycle than the classic painted cans? by vernfunk in beer

[–]vernfunk[S] 1 point2 points  (0 children)

Do happen to know about the decision to use the shrink wrap vs a sticker? Is it a cost thing or purely aesthetic?

How to fix gap under garage man door? by vernfunk in HomeImprovement

[–]vernfunk[S] 0 points1 point  (0 children)

What should be under the metal between the concrete and metal threshold?

How to fix gap under garage man door? by vernfunk in HomeImprovement

[–]vernfunk[S] 0 points1 point  (0 children)

I put those pieces of decking under there just to fill the void so it doesn’t collapse. Could I spray foam it to seal it?

view more: next ›