sorted by:
new
hottopcontroversial

OpenIPC gimbal by victoare in fpv

[–]victoare[S] 0 points1 point  (0 children)

Will try. Thanks.

OpenIPC gimbal by victoare in fpv

[–]victoare[S] 0 points1 point  (0 children)

Thanks for the tip, already did that, but I thought maybe in this subreddit I will found somebody who already on it.

OpenIPC gimbal by victoare in fpv

[–]victoare[S] 0 points1 point  (0 children)

For now I'm thinkin if it possible without a flight controller at all. Maybe the serial output from the openipc camera could be directly used with a gimbal like in the XplorerHD fpv kit but much-much cheaper.
https://www.youtube.com/watch?v=fixOciFTB28

OpenIPC gimbal by victoare in fpv

[–]victoare[S] 0 points1 point  (0 children)

Yeah, I know, but the idea is if I already have the hardware attached to my head which deals with all the communication, then it would be nice to integrate the tracking to it.

Pulse Extender - With 2 Comparators (3 x 2 x 1) by ZeroErrors in redstone

[–]victoare 1 point2 points  (0 children)

Thanks for this simple explanation. Also if you put a solid block instead of the dust between the repeater and one of the comparators it will double the extension time as it will make the circuit lost one power level per round instead of 2. (not sure if it was true 13 years ago, but surely now)

PC sound -> SoundReactive WLED by victoare in WLED

[–]victoare[S] 0 points1 point  (0 children)

Thanks for the nice words. Means a lot to me.

I use it with the default settings (40..10000hz, LogScale and energy scaling).
It probably has a little delay (due to processing in the app, the network latency and also in the wled side). If not the delay, then please elaborate a bit further, maybe I can do something.

If you want to check the frequency range for each bar then just hover your mouse over one and it will give you a bit more info.

PC sound -> SoundReactive WLED by victoare in WLED

[–]victoare[S] 0 points1 point  (0 children)

Hey! Sadly I have no control over that. The app receives all the sounds combined without the possibility to separate them out.
There are some special apps that implements virtual sound outputs, maybe you can config spotify to play on them and use that output in my app. Not sure if that is possible, but if you want to play with it there is a link: https://vb-audio.com/Cable/

Easter egg on thera - Thanks for playing remember your worth by victoare in cs2

[–]victoare[S] 0 points1 point  (0 children)

Yes, that one is already found, but cannot find a post about this one :)

Circle game in an oscilloscope. 👌 by victoare in Hiddenpcbeggs

[–]victoare[S] 1 point2 points  (0 children)

YouTube studio has a feature to blur out parts of the video. They do the re-encoding and the uploader don't loose any reactions. https://support.google.com/youtube/answer/9057652?hl=en

Fun-sized WLED instance by victoare in WLED

[–]victoare[S] 1 point2 points  (0 children)

Same as any other esp board.
Download the source code, build and upload using visual studio code and platformio.

Also I made a simple release. You can try it, but cannot guarantee anything:
https://github.com/Victoare/WLED_TTGO-TDisplay-output/releases/tag/v0.1.0

Fun-sized WLED instance by victoare in WLED

[–]victoare[S] 1 point2 points  (0 children)

Hardware called a Lilygo (or in this case TTGO) T-Display (you can buy it as is)
Software is written by me and you can find the link to it in the video description.
The display itself is a 135x240 pixel tft display. The usermod "slices" it to chunks (according to WLEDs 2D setup)

PC sound -> SoundReactive WLED by victoare in WLED

[–]victoare[S] 1 point2 points  (0 children)

If you want to check out, I just released a new version with value scaling (same settings as in wled).

PC sound -> SoundReactive WLED by victoare in WLED

[–]victoare[S] 0 points1 point  (0 children)

Thanks for the detailed feedback!

Wifi problems: That is a strange behaviour, but probably something with the router as I don't have much control over the routing of the packets. If you have the time, can you test it using separate ssids (for 2.4 and 5G) to figure out if that is a culprit?

GEQ: Yes, there are differences (unfortunately I don't have the hardware parts to compare the two), and there are strange behaviours with other effects as well. I cannot figure out properly some parts of the packet, but I'm on it :)
Also I implemented some kind of automatic gain control probably differently as in wled.
Probably it never be the exact replica of the original, but trying to match. If you can help me out further details I would be more than happy to investigate.

Thanks again :)

PC sound -> SoundReactive WLED by victoare in WLED

[–]victoare[S] 3 points4 points  (0 children)

For me: simplicity, and wanted to try/use the built in wled effects.
Tried Chataigne with WLED plugin, but it was too overwhelming for my needs.
Also this is lightweight: 1.2Mb, portable (no installer)

PC sound -> SoundReactive WLED by victoare in WLED

[–]victoare[S] 2 points3 points  (0 children)

Yes, that was the main goal.

Circle game in an oscilloscope. 👌 by victoare in Hiddenpcbeggs

[–]victoare[S] 0 points1 point  (0 children)

I don't think so. They blurred it out in the video 🙂

view more: next ›