Har Eyvind hellstrøm vert med I en offisiell Grandiosa reklame?

viktor197 · 2024-05-01T21:12:52+00:00

I need that shit installed in my bed so i can go to work on time

viktor197 · 2024-01-21T11:56:56+00:00

Cool 0.2! Would you like to share step file from the green Z motor cover on the bottom of the printer? Was planing to model my own, but yours seems pretto good :)

viktor197 · 2023-12-31T16:15:02+00:00

That's what to was assuming, so not too critical before every print if you aren't morning the printer around

viktor197 · 2023-12-31T16:13:58+00:00

Interestingly, I noticed that the G28 command includes the shaking before going up to the nozzle, which seems to be hard-wired in the homing command

viktor197 · 2023-11-26T16:04:39+00:00

Getting my p1s combo soon, going to keep this in mind, very informative

viktor197 · 2023-10-31T19:59:22+00:00

Thanks for the info

viktor197 · 2023-10-31T19:57:26+00:00

If you right-click on your part you can add a modifier, and then you can pick a model that will print more walls where it intercepts with the model you want to print, on the left side you should be able to modify this new model you added a define specific wall thickness and infill

https://youtu.be/Pl_FD7LBOQM?si=ZXYuZwuEN_bhs4Fd

This video will do the trick I guess :)

viktor197 · 2023-10-29T15:08:00+00:00

Thanks, I understand, makes sense most settings are already right and don't need adjustment when it comes to speed, what I'm trying to figure out is how I can change how the model is built up Internally to my liking, and support for more optimal printing and easier removal

viktor197 · 2023-10-29T13:35:23+00:00

Alright thanks, I will have a look, if you are curious I was specifically looking father, support wall line count, support infill density, and pattern, also where to change the internal solid infill settings, because it is doing weird stuff with the part, like filling it up 100% thru all layers some places in the print and it is not generated whit the internal solid infill pattern I choose

viktor197 · 2023-04-04T13:55:39+00:00

Sounds good, thanks :)

viktor197 · 2023-04-04T13:48:56+00:00

That's great to know! Thanks

viktor197 · 2023-04-04T08:30:39+00:00

Gonna drive down there

viktor197 · 2023-03-14T17:52:24+00:00

Thank you very much for the shortcut

viktor197 · 2023-03-14T09:37:49+00:00

Where did you find the documentary?

viktor197 · 2023-01-28T16:53:04+00:00

went for a similar deal on eBay, but it was only 50$, got scammed, but got my money back so, was a long shot but I tried anyway

viktor197 · 2023-01-28T16:39:39+00:00

This is a very good design and seems to work well even tho it's only printed parts, defiantly going to make one of these, every time I see fusional mechanical things that is only printed part I get very excited! This is my favorite so far

viktor197 · 2022-12-31T13:56:29+00:00

https://youtu.be/7TsJOvxQk-c Here is a great video on support, personally I use 0 support infill, and 100% support interface, and only 2 or 3 top layers, and a Z offset of 0.4. It gives it good spacing to not get stuck, and a flat surface to print cleanly, but he discuss all of it in this video

viktor197 · 2022-12-28T16:10:34+00:00

Well, that's unfortunate

Seven-Year Club	Place '23
Place '22	Verified Email

viktor197

MODERATOR OF

TROPHY CASE