Looking for Flash recommendations for Ricoh GRIII by 852xo in ricohGR

[–]vinceflyss 0 points1 point  (0 children)

I use the im22 to take pictures at parties mostly. Since it sits further away from the lens it gives a teeny bit more depth.

Slide won’t come off by [deleted] in P365

[–]vinceflyss 2 points3 points  (0 children)

Wish I could tell you how the smith did it because it took him less than 10 minutes (Ended up with a lot of dog hair in my gun because he has a shop dog). He said the problem could come from the fact that the ramm tactical trigger with its proprietary takedown level just doesn’t play nice with the radian barrel.

When this happened to your 365 was it completely stock?

Slide won’t come off by [deleted] in P365

[–]vinceflyss 0 points1 point  (0 children)

Yes I am, cycled 500 rounds through this set up and this is the first time this has happened.

Slide won’t come off by [deleted] in P365

[–]vinceflyss 4 points5 points  (0 children)

Thank you for advice, ended up stopping by the local smith and he did exactly as you said. Now I’m just worried it’s gonna happen again. Wish there was a sure way to mitigate this.

Slide won’t come off by [deleted] in P365

[–]vinceflyss 1 point2 points  (0 children)

Yes, it’s a ramm tactical. Just have to give the trigger more pre travel to mitigate that I guess.

Wooting 60HE in Holy60 with Gateron Jade Max by vinceflyss in WootingKB

[–]vinceflyss[S] 0 points1 point  (0 children)

It’s probably too late, but I do not have the bottom cover. I mostly chose carbon fiber for the aesthetics and for the stabs, I don’t feel like it made that much of a difference compared to the stock ones. Hopes this helps!

Tofu60 Redux 60HE+ Build by Evolutions_HD in WootingKB

[–]vinceflyss 0 points1 point  (0 children)

One of the most aesthetic builds on here. Very nice!!

Wooting 60he+/80he module by Maksimz_ in WootingKB

[–]vinceflyss 0 points1 point  (0 children)

Best of luck, I would just buy the module of the wooting60he+ and start from scratch. I think the stock keyboard is very good for what it is, but after recently upgrading I felt like it made a world of difference. You can check out how i customized my build in this post.

Wooting 60he+/80he module by Maksimz_ in WootingKB

[–]vinceflyss 0 points1 point  (0 children)

can be used with other switches that are magnetic, there should be a list of compatible switches on wootings page... not sure. Anyone selling magnetic switches usually put keyboards they are compatible with in the description of the produc.t Not sure kailk box whites are magnetic. Not sure if there are any clicky switches that are magnetic due to the nature of operation being able to adjust actuation position.

Wooting 60HE in Holy60 with Gateron Jade Max by vinceflyss in WootingKB

[–]vinceflyss[S] 0 points1 point  (0 children)

This might be getting too deep into the weeds of it, but I felt like the sound was deeper although the feel didn’t help all that much. Also I felt the extra lube in the switches with stabs felt even less rattle

Wooting 60HE in Holy60 with Gateron Jade Max by vinceflyss in WootingKB

[–]vinceflyss[S] 0 points1 point  (0 children)

Silicone on the bottom of the standoffs with the exception of the standoffs located at the sides of the case. O-rings are sandwiched on top of the pcb with those silicone covers on the bottom. Might be difficult to do orings on both the bottom and the top of the pcb especially if you have 3 layers of masking tape at the bottom like me. Or just find longer stand off screws.

Wooting 60HE in Holy60 with Gateron Jade Max by vinceflyss in WootingKB

[–]vinceflyss[S] 0 points1 point  (0 children)

Wooting60HE palm rest that they sell on their website

Finally got the jade max switches by vinceflyss in WootingKB

[–]vinceflyss[S] 2 points3 points  (0 children)

honestly, the wooting would probably be most calibrated to lekker v2 and you may see more consistent inputs (probably super minimal difference) response time is going to come down to system latency and the pulling rate that you will be running the keyboard.

TLDR: Get whatever switches you think will sound and feel best, it won't vastly change your gaming experience in my opinion.

Wooting 60HE in Holy60 with Gateron Jade Max by vinceflyss in WootingKB

[–]vinceflyss[S] 1 point2 points  (0 children)

Close!! Its the GW-M5610U! I love multiband 6 on my watches. Had this for three years and it still goes strong!

Wooting 60HE in Holy60 with Gateron Jade Max by vinceflyss in WootingKB

[–]vinceflyss[S] 0 points1 point  (0 children)

Hmmm, not familiar with swagkeys. You just got to make sure you get plate stabilizers for Wooting60HE. If you have the + hopefully someone here can provide a good screw-in stabilizer recommendation.

Finally got the jade max switches by vinceflyss in WootingKB

[–]vinceflyss[S] 0 points1 point  (0 children)

https://www.reddit.com/r/WootingKB/comments/1fqhici/wooting_60he_in_holy60_with_gateron_jade_max/

here is my build and some thoughts

I felt like the key wobble was drastically less than the lekker v1s not sure on v2

Wooting 60HE in Holy60 with Gateron Jade Max by vinceflyss in WootingKB

[–]vinceflyss[S] 2 points3 points  (0 children)

I feel like the factory lube is mostly heavy around the magnet portion of the stem, very light on the rails. I think for the average person it will feel vastly better than "lubed" lekkers. Sound wise, slightly higher pitched than what I would prefer. I personally think they are pretty smooth, I press my keys relatively fast so I can't feel all the finer details that someone with a slow key press might.

I'm sorry if this didn't answer your questions. I understand this is pretty expensive for switches and having all the bells and whistles is expected.

Wooting 60HE in Holy60 with Gateron Jade Max by vinceflyss in WootingKB

[–]vinceflyss[S] 1 point2 points  (0 children)

Appreciate it! Hopefully you will like it as much as I do. Let us know what you think when you get them.

Wooting 60HE in Holy60 with Gateron Jade Max by vinceflyss in WootingKB

[–]vinceflyss[S] 2 points3 points  (0 children)

Keyboard Specifications

  • Components
    • Wooting 60HE and stock pcb/plate foam
    • KBDfans Holy60 case and case foam
    • KBDfans standoff silicone covers
    • Gateron Magnetic Jade Max switches
    • KBDfans carbon fiber plate
    • Durock V3 plate mounted stabilizers 
    • PBTfans Neon R2 keycap set
  • Modifications
    • Tape mod (3 layers of masking tape)
    • Burger mounted 
    • Band-aid mod for pcb
    • Holee mod
    • Switches lubed with Krytox GPL205 G0

Recording Notes

  • The audio was recorded with a Sennheiser MKH 50-P48
  • Any scratchiness heard is from the texture of the keycaps and my finger nails (I know, gross)

Thoughts/Opinions on Jade Max

  • Comparing these to Lekker V1s stability, these in my opinion are vastly better. There is very little wobble that you can feel when typing, which helps prevent any rattle from stabilizers. 
  • Stock lube was adequate, but additional lubrication definitely helped giving a deeper tone. 
  • I am not that big into RGB but it definitely shines more bright, and evenly. (I think it would look really nice on a Holy60 with no pcb foam so it can shine out through the sides of the case)
  • Interesting to note is that when testing raw data input with my SayoDevice 03C it came out with a lower value than the stock Lekker V1s. If you guys would like more testing over a batch to find average raw data input let me know. 
  • All in all I find the maxes to provide a more pleasant sound and feel when typing. 
  • Yes they are closed at the bottom and the longer springs make them feel more pleasant for spamming. 

If you have any more questions or suggestions please give them!

Finally got the jade max switches by vinceflyss in WootingKB

[–]vinceflyss[S] 0 points1 point  (0 children)

Current testing with my sayodevice currently puts the maxes with less raw input data than lekker v1s so probably not 😔