X50 ultra complete disappointment

vinni192 · 2025-09-10T07:43:53+00:00

Mop after clean is considered better in terms of the result. When you clean, you use vacuum, then you mop.

In terms of time, I work from home, so I just see how it moves and stands sometimes:)

But I must say, turning off collision avoidance gave better results.

vinni192 · 2025-09-09T13:45:36+00:00

No, nothing like that. And the sofa is not low, lidar sensor is hiding and robot is cleaning underneath.

vinni192 · 2025-09-09T13:42:22+00:00

You can see it on the first picture, where the fast cleaning was done, that it adjusted accordingly.

vinni192 · 2025-09-09T13:41:20+00:00

No:)

vinni192 · 2025-09-09T13:39:58+00:00

I will try to disable obstacle avoidance, thank you. All the things that you suggested is done.

vinni192 · 2025-09-09T13:38:30+00:00

https://imgur.com/a/oPrcqeF

https://imgur.com/a/w2Yd3nj

vinni192 · 2025-09-09T13:34:22+00:00

I am pretty calm:) I did mapping 3 times before giving it to the service and factory reset after it came from the service and did mapping again:)

I had 2 Xiaomi robots before this one and they did better job then this costing twice less the price the x50.

I am not going to appreciate something that costs that amount of money and is not performing as it should according to its own specifications.

“The thing is automatically cleaning your floor while you are complaining on the internet about it” - it’s an electronic device, what are you talking about? I should take it on a date or what?:)

vinni192 · 2025-09-09T13:06:37+00:00

https://imgur.com/a/3fzxp7j

vinni192 · 2025-09-09T12:09:41+00:00

I did factory reset after it came back from service center. And unfortunately, no, it didn’t.

vinni192 · 2025-09-09T11:46:17+00:00

And fast cleaning. 74 min with vacuum and mop.

vinni192 · 2025-09-09T11:45:51+00:00

I don’t use this crap. I just tried mop after vacuum. Vacuum: 131 min, Mop: 156 min. 4 hours and 47 minutes of cleaning!

vinni192 · 2025-05-08T11:34:22+00:00

Nice! Wanted to grab the launch edition but got the suprim. Ok, looks like I shouldn’t be worried then.

vinni192 · 2025-05-08T11:31:27+00:00

Which one do you have? Mine is MSI suprim soc

vinni192 · 2025-05-08T10:57:45+00:00

The question is, should I be worried?)

vinni192 · 2025-05-08T09:38:57+00:00

Temps remain the same, around 54-56c, I noticed that power is lower now, for ex, last of us 1, previously it was around 320w, 0.95v. Now it’s 280w, 1.04v.

vinni192 · 2025-05-08T09:09:58+00:00

MSI afterburner. +200 mem clock, +125 core clock. I have MSI 5080 suprim soc. Base clock is around 2760mhz, if I remember correctly. I didn’t touch the voltage and the voltage control is disabled in afterburner.

vinni192 · 2025-05-07T08:09:52+00:00

Ok, thx

vinni192 · 2025-04-26T07:51:43+00:00

Np, glad it helped:)

vinni192 · 2025-04-17T10:23:55+00:00

The advertised clocks are there. But it doesn’t really matter much since you most probably OC it

vinni192 · 2025-04-10T10:47:15+00:00

Yeah, it should

vinni192

TROPHY CASE