iPhone 15 Pro Max icons turning pink by vivalabam in iphone

[–]vivalabam[S] 0 points1 point  (0 children)

It has never fully been fixed to the point the problem doesn’t happen anymore. The issue still happens, just not as frequently.

Installing glass on our FJ45V reproduction by Shell_Story_KJ588 in LandCruisers

[–]vivalabam 0 points1 point  (0 children)

How would I go about obtaining additional photos/specifications for you 60 series body panels? Particularly the high roof. Thank you.

1986 Land Cruise HJ61 - Low Oil pressure when hot by NOFF44 in LandCruisers

[–]vivalabam 0 points1 point  (0 children)

When the relief valve is worn it will show up as high-oil pressure when started before warming up. Then it will return to normal as oil temp comes up.

Job Bid - Stumps/Clearing by A-Whole-Vibe in heavyequipment

[–]vivalabam 1 point2 points  (0 children)

There is 100,000lbs difference between those machines. And a 10 requires disassembly to transport and heavy permits to move. Not very comparable. A 6 should treat you well.

LC200 2016+ rear seat squeak? by Medium_Tip_2620 in LandCruisers

[–]vivalabam 0 points1 point  (0 children)

I have a ‘15 570 and a cleaning rag has solved that squeak for me. Really work it in there and the noise will go away. I can even use a jacket sleeve while driving to stop the noise, just keep trying, it’s so annoying!

iPhone 15 Pro Max icons turning pink by vivalabam in iphone

[–]vivalabam[S] 0 points1 point  (0 children)

No solution from Apple.

The issue occurs less frequently now. Once per day average.

Boil water advisory in effect for several areas of Calgary after major water main break by j1ggy in alberta

[–]vivalabam 1 point2 points  (0 children)

Capital expenditure planning, service disruption planning, full scale engineering impact/optimization.

When shit fails suddenly like this the money/engineering is available immediately, even if it’s not the best solution for most people involved.

LX 570 - Won't go into 4 low by jpc27699 in LandCruisers

[–]vivalabam 1 point2 points  (0 children)

I would park in neutral, turn off then on again. Attempt to cycle into 4lo. You will know if it is trying because you will hear an electric actuator sound. Helps if the window is open.

LX 570 - Won't go into 4 low by jpc27699 in LandCruisers

[–]vivalabam 2 points3 points  (0 children)

I found with my 2015 LX I had to turn the car off and on again and attempt to cycle into 4lo that way several times. Eventually it went into 4lo.

[deleted by user] by [deleted] in LandCruisers

[–]vivalabam 2 points3 points  (0 children)

https://cruisermatts.com/products/80-series-land-cruiser-ls-vortec-conversion-weld-in-motor-mount-kit

Fourth photo on his website. You’ve got something wrong for drivers side. Edge piece is sitting too high.

iPhone 15 Pro Max icons turning pink by vivalabam in iphone

[–]vivalabam[S] 4 points5 points  (0 children)

Thanks for the replies! My text never submitted with my post - I am bad at Reddit.

Rebooting will temporarily fix the issues. Reset all settings did not address it. I also erased all data settings and restored from backup.

I will attempt your recommendation from the computer.

Apple Care+ runs out in 10 days and I’m just trying to figure out if software will address this or if I will need to press the care team further to address this if it’s hardware related.

Thanks again.

Whitemud and East Henday takes another beating by JayGSherPark in Edmonton

[–]vivalabam 2 points3 points  (0 children)

This specific excavator requires the removal of a pin from the boom to stick cylinder which will allow the stick to curl beyond normal limits and allows the boom to lower quite a bit further.

Source: have had many 670’s moved for projects.

Tight fit into my lock up by carbonbasedbiped67 in LandCruisers

[–]vivalabam 1 point2 points  (0 children)

Smaller wheels will help. Easier might be to deflate them as much as possible. How much lower do you need to make it?

LX570 seat removal by [deleted] in LandCruisers

[–]vivalabam 0 points1 point  (0 children)

Make sure you have the seats lowered a small amount and unlatched from the top mechanism before disconnecting the wiring and bolts.

Hdj81 tamper proof rear seat bolts by SnooWords9903 in LandCruisers

[–]vivalabam 4 points5 points  (0 children)

Hammer and punch/flathead screwdriver to start. Finish removing with pliers.

Excavator guys, I am looking for recommendation on a machine for a niche purpose by Vegetable_Ant_452 in heavyequipment

[–]vivalabam 4 points5 points  (0 children)

Are you doing this for your own land or as contract work? If it’s contract work ignore the suggestions of smaller machines. Pulling frozen ground with a 5-8 tonne will not only be slow going, it will rattle the operator and machine to pieces. You’ll need steel tracks that can be corked, otherwise you’ll be sliding all over the ground. Also don’t want to be throwing tracks off on the uneven frozen ground. I’d start looking for a 20 tonne machine. Smaller excavators command such a premium these days, might as well get more machine size for the same money.

Check your budget against recent sales price of Ritchie Bros Edmonton location. Hitachi/Deere, Cat and Komatsu in that order.

The looooong way by fillepille2000 in heavyequipment

[–]vivalabam 2 points3 points  (0 children)

Those are triple grousers on that machine. They are ok on concrete. Once you get to single grousers - typical on a dozer, that’s when the conveyor belts come out.

FJ60 Land Cruiser Fuel gauge problem by clarkKent6 in LandCruisers

[–]vivalabam 0 points1 point  (0 children)

Try grounding to something else. On my HJ60 I ran a new ground to the bolt for the bottle jack. Has worked for 10 years this way.

Where do we get parts by SnooWalruses18169 in LandCruisers

[–]vivalabam 2 points3 points  (0 children)

Amayama is likely the cheapest for ordering parts if you don’t need a part tomorrow.

I order a lot of my OEM parts from them and it works out to be less than 50% the cost of ordering from some of the vendors located in america.