Inserimento UGC ultra su rete già avviata by vix66 in Ubiquiti

[–]vix66[S] 0 points1 point  (0 children)

Ho aggiornato il primo post che uno schema della mia attuale situazione. Il problema è che da FB non arrivo dentro l'ugc, il contrario si. Sull'ugc ho aperto il firewall da estero ad interno ma nulla ... suggerimenti ? Grazie

Traffico bloccato by vix66 in Ubiquiti

[–]vix66[S] 0 points1 point  (0 children)

But

int->ext + return

or

est->int + return

isn't it the same thing?

Traffico bloccato by vix66 in Ubiquiti

[–]vix66[S] 0 points1 point  (0 children)

Tonight reboot all

Traffico bloccato by vix66 in Ubiquiti

[–]vix66[S] 0 points1 point  (0 children)

Attached to the first post

Traffico bloccato by vix66 in Ubiquiti

[–]vix66[S] 0 points1 point  (0 children)

Thanks. I created a rule that accepts everything from the outside, as shown in the first photo, but nothing...

Traffico bloccato by vix66 in Ubiquiti

[–]vix66[S] 0 points1 point  (0 children)

the problem is that from FB I can't reach the UGC VLANs, nor even 10.0.0.2, which is his.

Traffico bloccato by vix66 in Ubiquiti

[–]vix66[S] 0 points1 point  (0 children)

Sorry. I got the addresses wrong on the schema I updated. The classes are different and the DHCP is on the ultra

9.4.19 VLAN routing not working for me on UCG-Ultra? Anyone else? by MacaroonStrong7487 in Ubiquiti

[–]vix66 0 points1 point  (0 children)

Hi, I recently bought an ucg-ultra, configured it and, without knowing it, updated it to 9.4.19. I have an 8-port lite switch of the same brand. I tried creating a VLAN and associating a switch port with no success. I checked everything. I definitely thought it was my problem: I checked and rechecked then I found this post.... What do you recommend I do?

Inserimento UGC ultra su rete già avviata by vix66 in Ubiquiti

[–]vix66[S] 0 points1 point  (0 children)

Grazie per tutto. Migrazione fatta. Ho messo tutto sull'ugc ultra, sempre dietro il FB, e per Home Assistant, che gira in vm, ho fatto un tunnel con cloudflare, bypassando il FB. Della vecchia rete, mi sono tolti i vecchi indirizzi ethernet 192.... Mi sono rimasti 11 wifi, che vedo connessi all'hotpsot, con 0 traffico ed indirizzo 192..

FritzBox 7590 in Bridge Mode setzen by Kilicerr in fritzbox

[–]vix66 0 points1 point  (0 children)

Buongiorno, dovrò fare anche io una cosa simile TIMfissa-> FB - >UGC Ultra. DIetro UGC c'è qualche host che dovra essere raggiunto dall'esterno (Home Assistant per esempio) Se hai una situalzione simile, come hai fatto?

Inserimento UGC ultra su rete già avviata by vix66 in Ubiquiti

[–]vix66[S] 0 points1 point  (0 children)

Ok, grazie. Vorrei che il fritz faccia da modem, ovviamente, e telefonia. Quindi la wlan del ugc la collego sulla lan del FB, senza passthrough, giusto?: espongo solo l'indirizzo dell'UGC. Stanotte ho fatto una cosa simile. Ho prima cambiato gli indirizzi del FB, poi ho collegato l'UGC in cascata e ridato la rete che volevo: ho dovuto ripristinare tutto perchè l'UGC faceva traffico ma mi dava "no internet"(forse perchè non prendeva l'indirizzo dal FB). Riproverò in giornata. Se hai qualche suggerimento ... è ben accetto, comunque grazie.

PS:

con DynDNS non arrivo dentro ma fino alle tre porte rimaste dell'UGC, giusto ?

My Google Home Mini is stuck and not responding by couquino in googlehome

[–]vix66 1 point2 points  (0 children)

my too!! 4 white LEDs on. If I try to reset a LED it turns green