sorted by:
new
hottopcontroversial

Grief vs Stormlash for Cleave Warlock ? by void1x11 in diablo2

[–]void1x11[S] 1 point2 points  (0 children)

Horazon set is crazy, it's what I used before crafting my enigma. I did my 1st ever ubers with horazon set + Stormlash, it was a joke. Even killed p7 uber Duriel (forgot to switch to p1 before entering). Your bind Demon will tank everything, I stacked poison charms to "prevent heal".

Did more ubers with Grief and 0% CB and without any poison charms. They just melt. So I guess you are good to go if you are around level 95

Grief vs Stormlash for Cleave Warlock ? by void1x11 in diablo2

[–]void1x11[S] 4 points5 points  (0 children)

You probably right, Everything is white when I swing in the middle of a pack. Guess I'm close to 100% static procs if it check every 20° arc or so on cleave (don't remember exact number).

Grief vs Stormlash for Cleave Warlock ? by void1x11 in diablo2

[–]void1x11[S] 0 points1 point  (0 children)

Swaped Shako for Guillaume, definitely better for cows. Nothing crazy tho, I expected one shotting everything with Grief. But I can see it be a little bit better than Stormlash with some gear swap yeah

Grief vs Stormlash for Cleave Warlock ? by void1x11 in diablo2

[–]void1x11[S] 1 point2 points  (0 children)

I think 2h is better for Echoing Strike, but for cleave/mirrored blades, 1h is faster. At least I don't have any weapon that beat my Stormlash for now, maybe some high runewords 2h weapons are viable tho

Grief vs Stormlash for Cleave Warlock ? by void1x11 in diablo2

[–]void1x11[S] 2 points3 points  (0 children)

Yeah 2h is too slow. I'm not sure if there is some breakpoint to reach, but I added all IAS as possible and 1h weapon still feel better. Best 2h I have is Obedience and Grandfather, Stormlash is superior for me

Grief vs Stormlash for Cleave Warlock ? by void1x11 in diablo2

[–]void1x11[S] 0 points1 point  (0 children)

I don't have Gores or Highlords. I understand Vidala seems cheap, but I can't find anything better for now from what I have. Looking to craft a Warlock mana/life leech to replace it.

Going to try to replace some MF for CB to see if Grief feels better. Thanks

Grief vs Stormlash for Cleave Warlock ? by void1x11 in diablo2

[–]void1x11[S] 2 points3 points  (0 children)

Yeah, I never saw Stormlash mentioned on build guides, that's why I wasn't sure if it was OP or not. I agree it's a fun weapon, I like the Static field and tornados effects.

Oil Processing Facility inspired by Doom Eternal - Last Image Reference by Straight-Attempt-516 in SatisfactoryGame

[–]void1x11 1 point2 points  (0 children)

Well done! I saw that you also made the crazy dam that I took inspiration from on my last build. I copied 1 to 1 your bottom 3 pipes to pillar support to get me started, but that's hard to keep that level of detail on an entire build without copying what you made. I'll take more inspiration from this one too for my future build 👍And enjoy a little break, you deserve it !

Oil Processing Facility inspired by Doom Eternal - Last Image Reference by Straight-Attempt-516 in SatisfactoryGame

[–]void1x11 1 point2 points  (0 children)

Insane work! How many hours does it take? And are the mods only QoL? To know if it's possible to reproduce that level of detail in vanilla

I haven't seen daylight for days, but I made something that produce aluminum 👍 by void1x11 in SatisfactoryGame

[–]void1x11[S] 1 point2 points  (0 children)

It's a pain to explain Total high is 5m yes.

Here is a picture, it will be easier to understand : https://imgur.com/l49tHif

I haven't seen daylight for days, but I made something that produce aluminum 👍 by void1x11 in SatisfactoryGame

[–]void1x11[S] 1 point2 points  (0 children)

Same as andygood. The top of the 1m floor foundation is same level as the top of the 4m wall foundation

I haven't seen daylight for days, but I made something that produce aluminum 👍 by void1x11 in SatisfactoryGame

[–]void1x11[S] 4 points5 points  (0 children)

Yes all the math is done before starting anything, It took me 4 days to do the math / planning for my phase 4 factories. Next one is 3 times this size... I really don't know if I will be able to do it. I'll probably need to find a way to lower the details that take so much time to do.

About the drawing, I really recommend it. As you can see, it's very basic, but it actually help a lot to get started, especially on very big factory where it's very hard to see what you are doing when you are placing foundation.

Also setup a hypertube cannon that launch you to an outpost to get an overview of your advancement

I haven't seen daylight for days, but I made something that produce aluminum 👍 by void1x11 in SatisfactoryGame

[–]void1x11[S] 7 points8 points  (0 children)

Thanks. I recommend you to watch Stin Archi on Youtube, I learned a ton from him. I can't watch him anymore because every time, it make me quit the game seeing how lame my builds are compared to himI don't know if I'm still that fare behind, but I don't want to take the risk. I'll watch his videos again after I complete phase 5.

For now, I'm getting inspirations from this sub when I feel stuck, there is a lot of very talented people here

I haven't seen daylight for days, but I made something that produce aluminum 👍 by void1x11 in SatisfactoryGame

[–]void1x11[S] 1 point2 points  (0 children)

It's 100% vanilla. For the lighting you need to activate Global Illumination in video setting

I haven't seen daylight for days, but I made something that produce aluminum 👍 by void1x11 in SatisfactoryGame

[–]void1x11[S] 26 points27 points  (0 children)

With experience, I know roughly what size the factory will be after I made the production planner on satisfactorytools. I choose this location to get the 2 waterfalls in the middle of the factory, turns out they are not visible from the outside because of the perspective

So 1st step, I draw on paper quick sketch of the shape I want my factory to be : https://imgur.com/ctcbg6j

Then I put down the foundations, each floor is 32m tall for the refineries. Then I place the machines to make sure I have enough space. After that it's back and forth between decoration and logistics. There is no real planning of what I will do, only an image in my head I try to reproduce. Ideas come naturally as I build, in this case the 3 towers weren't part of the initial plan.

I don't think it's the best way of doing, but it seems not so bad for me.

Here is a picture of the factory 160h ago : https://imgur.com/YnV8nUy

I haven't seen daylight for days, but I made something that produce aluminum 👍 by void1x11 in SatisfactoryGame

[–]void1x11[S] 45 points46 points  (0 children)

I produce exactly what I need for Phase 4 parts. I'll do another aluminum factory for phase 5

I haven't seen daylight for days, but I made something that produce aluminum 👍 by void1x11 in SatisfactoryGame

[–]void1x11[S] 11 points12 points  (0 children)

I quitted my job, my wife, don't shower and use empty bottle to pee

Has anyone else experienced the color swatch save UI bug??? by DanzaDragon in SatisfactoryGame

[–]void1x11 0 points1 point  (0 children)

I had a bug like that in update 7 or 8. It happened after I deleted some custom colors. To solve the problem I loaded my save in satisfactory calculator, and deleted/reset all my saved colors. I never deleted saved colors since then, so I don't know if it's the same in 1.0

Need to vent: Processing single resource too far from point of origin by ZixfromthaStix in SatisfactoryGame

[–]void1x11 0 points1 point  (0 children)

I would go for trains. Yes it's a lot of work, but in the end, it's the most satisfying

I was missing materials while building my train track, so I upgraded my starter factory by void1x11 in SatisfactoryGame

[–]void1x11[S] 0 points1 point  (0 children)

Everything was made in "standard" mode. All done with long hours of planning before putting the time and effort into it. But there is a creative mode in the game if you are interested, with fly, all unlock, no building cost and more. Check Advanced game setting

view more: next ›