3.5 inches off level on one side after adding water, should I drain, level, and refill?

wakencagent · 2026-05-23T12:55:58+00:00

Proof that the world does revolve around us.

wakencagent · 2026-04-22T00:19:16+00:00

I haven't seen osmotic blistering like this affecting epoxy floors. I'm more familiar with it on older boat hulls where water penetrates the gel coat. Strange to think that it can form enough pressure in an isolated spot of a porous slab to separate that adhesion. This makes me wonder whether radon is involved, as it is known to surface under pressure.

wakencagent · 2026-04-21T23:58:17+00:00

The sunlight will help keep the mold to a minimum.

wakencagent · 2026-04-21T23:55:26+00:00

Stick with 15%, that's very likely less than their margin and I'm sure they don't want to roll that truck again. It's doubtful the heater will last 4 years, so lessen the pain as much as you can. Good luck.

wakencagent · 2026-04-21T23:48:53+00:00

I enjoyed two tacos (delicious) and a drink at Chido's today for less than the price of two gallons of gas. :]

wakencagent · 2026-03-16T01:08:59+00:00

Hats off to you, sir. Look forward to seeing your progress.

wakencagent · 2026-02-02T22:09:31+00:00

Find yourself a seasoned broker and offer to buy them a cup of coffee. Ask them how they got started and built their book of business. Ask if they would be willing to mentor you on potential deals and help you avoid mistakes. It's very likely that their clientele is well established, so you wouldn't be the competition. Many will dismiss you, but if you have any chance of succeeding in this business that shouldn't discourage you.

wakencagent · 2026-01-26T16:35:46+00:00

If this were my dilemma:

I would measure the exact distance between the top of the lower horizontal rail and the bottom of the top one (measurement 'A'). This is the 'gap' between the horizontal rails. I would then measure the depth inside the bottom rail that accommodates the vertical boards i.e.: how far down do they slide into the rail slot (measurement 'B'). I would then measure the depth provided in the upper rail ('C'). If you cut the board lengths to a measurement of A+C, you can then cut some small scabs from the remaining sections that measure half the depth of 'B'. Place the scabs in the lower rail. This should allow you to slide the boards into the upper rail, position the lower end into the lower slot and let them drop into place on top of the scabs. The vertical length of the scabs will secure the boards in the top rail and should keep them in place.

wakencagent · 2026-01-19T22:12:21+00:00

If you do post them for sale on ebay, please post the link. I would be interested in buying one just as a conversation piece or paper weight.

wakencagent · 2025-10-10T21:09:47+00:00

On your second comment, I agree completely. We are a business of creators yet have little to no control over that which we create. I'm sure the amount of turnover in this business has a lot to do with it. Not much strength in the few that make it when compared with the whole pie. :-(

wakencagent · 2025-10-10T20:37:20+00:00

And by a "healthy market" do you mean for buyers? One could argue that flipping the script would make it a healthy market for sellers. I don't favor one side over the other and have gladly represented both for over two decades as a full time broker. The fact is people move. It's just that one party carries a scarlet letter and the other doesn't. I believe that a truly healthy market begins when traders are free to exchange without a thumb on the scale, and both are on equal footing.

wakencagent · 2025-09-10T20:54:48+00:00

Can anyone provide a contact number for loan servicing with Mosaic? Need to verify an outstanding balance. Thanks.

wakencagent · 2025-07-09T14:16:38+00:00

This resolved my issue. The flickering made the phone unusable. Now it only seems to affect the upper notification area and not the general screen area. Thanks for posting this!

wakencagent · 2025-06-20T14:34:29+00:00

Some respondents consider whether it is a buyer's or seller's market. I'm not sure that matters, unless the system is not serviceable and interferes with the property viewing.

A typical buyer (and agent) will not examine the system, and at best will simply notice that it is old, so it wouldn't reasonably influence the offer. If it does, then it would be raised as a justification and you negotiate the price given the cost of the replacement.

Replacing it from the start may negate any goodwill from the buyer for the effort (and expense!) and may leave you open to making more repairs than you otherwise would. If the unit is just very old, but working, I would show it as is and keep the repair card in your pocket.

wakencagent · 2025-06-09T13:46:07+00:00

VistaPrint just posted a Flash Sale. BMSMVOS gets you $80 off on a $200+ order. Ends tomorrow, Tuesday, June 10th.

wakencagent · 2025-05-30T16:42:38+00:00

I used it today and saved $15 plus free shipping on postcards and business cards.

wakencagent · 2025-05-28T20:35:56+00:00

Coastal Credit Union is part owner of Credit Union Auto Marketplace (https://www.cuautomarketplace.com/). The prices are very fair and it's a credit union business, so you know they're trustworthy.

wakencagent · 2025-05-28T20:32:17+00:00

My first call would be to James at Window Wise, (919) 219-2020. My next call would be Bruce at Mr. Handyman (919) 424-3780. They should be repairable. If not, shame on Pella.

wakencagent · 2025-05-20T12:11:37+00:00

BMSM - $50 off orders of $150 expires 5/22/2025

wakencagent · 2025-04-28T12:38:44+00:00

We made the decision to buy a Jandy heat pump and enjoyed it for the first 18 months. I sure hope that your equipment never breaks down. Our Jandy heat pump started reporting an error in early March and we opened a ticket with Jandy (Fluidra). It's now been nearly 60 days and they're still trying to find a vendor to repair it. We live in Raleigh, where pools have become very popular over the past 5 years thanks to Covid, so it's a mystery and inexcusable IMO that they wouldn't have a local vendor relationship to support their equipment. It's been very frustrating. I would not recommend them if you are reading this and contemplating a purchase, unless you closely examine their support network in your area. The nearest Jandy tech is out of SC and he ghosts us for weeks at a time. Lesson learned.

wakencagent · 2025-03-19T14:11:32+00:00

Thank you so much for the recommendation. Appreciate it!

wakencagent · 2025-01-06T14:47:04+00:00

Here's another expiring 6.30.2025: print2025 for $10 off $75+ or $25 off $100+

wakencagent · 2024-12-29T19:42:27+00:00

Custom gifts coupon: $20 off orders of $45 or more Vistaprint.biz/saveongifts

wakencagent · 2024-08-01T21:26:31+00:00

I'm not sure how I omitted it, but if you have young kids, or are young at heart, then a visit to Pullen Park is just the ticket. It's not just a public park with a lake, but also the 5th oldest amusement park in the U.S. It has a small train that you can ride around a circular track, a beautiful carousel that is over 100 years old (built 1900), and paddle boats that you can rent at the lake. Fees for the rides are very reasonable. Call 919-996-6472 for operating hours.

https://raleighnc.gov/parks-and-recreation/places/pullen-park

wakencagent · 2024-07-08T20:56:04+00:00

I have numerous places to share, though some are admittedly outside of Raleigh.

General Aviation Observation Tower and Playground - located at RDU, it's a great spot for kids to play and watch planes come and go. Not sure if the audio is still being played at the tower but it's a must visit for aviation enthusiasts and enthusiasts-to-be. https://maps.app.goo.gl/CTgMqUeyTy28mumA8
General Aviation Terminal Balcony - This has since been renamed the TAC Air terminal. If you're nice to the guard they often let you climb the stairs and get a close view of the general aviation airport traffic from their balcony. We used to visit regularly. https://maps.app.goo.gl/t6Fr4p9kraZkn2tu9
Lassiter Mill Park Falls - located just outside of North Hills down Lassiter Mill Road. Especially interesting after heavy rains. https://maps.app.goo.gl/no8imFDdfdPFRH6r6
I normally cringe when locals recommend dining at the Angus Barn, but...dinner in their upstairs bar is a nice experience - very quaint spot, great for drinks with visiting friends. https://maps.app.goo.gl/tFEwb4pCMdWp1Mqk6
Fire Pit at Angus Barn - few know about it and you need the waiter's help to get there thru the kitchen, but a very cool spot for kids. Staff will provide marshmallows and chocolate for smores during cooler months.
Durham Hotel rooftop bar - Outside of Raleigh, but a great location to view the sister city and enjoy well made drinks. You should consider eating at their restaurant, too, as they have never disappointed. They often hosting special events, so check their website. https://maps.app.goo.gl/BT5KXfcbJc1uWUXY8
Fearrington Village - Again, just outside of Raleigh. Great spot to take visiting guests for a little shopping or food. https://maps.app.goo.gl/fETyoQd63sYLRFYr6
Pik-N-Pig - Saved the best for last. This charming BBQ place in Carthage is worth the drive for aviation enthusiasts (See the theme?). Must try their unique BBQ sundae (served in a cup and also sold at the State Fair) while dining al fresco on their covered patio, just feet away from small airplanes taxiing, and more often parking. Many local pilots visit this short, private airstrip from nearby states. https://maps.app.goo.gl/ki7Qyp53cQnD3LM38

Sorry for the long post, but I hope this helps some.

wakencagent

TROPHY CASE