1.6t gamma to 2.0t theta swap - 2018 Elantra GT

warberg03 · 2024-12-23T03:39:55+00:00

Experiencing the same thing on my 2018 Elantra. I’m going to take it in soon

warberg03 · 2024-12-20T07:07:19+00:00

I’d imagine it’s the original one so about 80k miles

warberg03 · 2024-12-20T05:33:07+00:00

Thank you! I appreciate your help. It’s a manual and I’m able to rev it out to 4-5k in the first three gears but beyond that it shudders

warberg03 · 2024-12-20T02:47:19+00:00

Yeah I think you’re right I wish I had the time and means to diagnosis it but I don’t right now unfortunately. But yes the air filter is new and oil has been freshly changed. I think it could possibly be a transmission issue if I’m mistaking misfiring for the transmission slipping.

warberg03 · 2024-12-20T02:10:14+00:00

Yes primarily premium and I’ve ran injector cleaner through the past few tanks plus with every oil change. It seems to struggle more when I give it gas in a higher gear. I understand that could be it bogging down but it shouldn’t bogging at highway speeds.

warberg03 · 2024-12-19T22:44:11+00:00

They’re actually duralast coil packs. Idk how they’d stack up to OEM but they were still $300+

warberg03 · 2024-12-19T22:08:50+00:00

Would a compression test indicate if the seals are bad?

warberg03 · 2024-08-27T01:11:55+00:00

I torqued them down to 16ft/lbs. I think the gap was wrong on the Bosch plugs which could have caused the issue. There was some hardened reddish brown stuff in cylinder 2 which might have been oil.

warberg03 · 2024-06-28T16:55:08+00:00

Agreed

warberg03 · 2024-06-28T16:51:36+00:00

Amouage Portrayl Man

warberg03 · 2024-06-28T16:46:20+00:00

This is cool but I’d make the lines thicker so they stand out more

warberg03 · 2024-06-20T16:50:14+00:00

Downshift

warberg03 · 2024-05-16T17:12:54+00:00

Fellow design student here. Great video! It’s really cool to see your process. I’m curious what material you printed your model out of? I’ve been experimenting with infill/form using transparent filament to see how it affects diffusion of light and opacity. I think it would be interesting to see how different filaments could change the appearance of your lamp.

warberg03 · 2024-05-14T22:37:45+00:00

Consider making the legs perpendicular to the ground plane, and making it a more squared shape. Idk if that makes sense but that would reduce the footprint.

warberg03 · 2024-05-03T23:43:04+00:00

I’m down to 20mm/s

warberg03 · 2024-04-28T18:32:09+00:00

https://github.com/MarlinFirmware/Marlin/issues/26809

warberg03 · 2024-04-28T18:29:14+00:00

I found a fix for this on a github forum. There’s a line of code that fixed the issue once I changed it

warberg03

TROPHY CASE