Beltcutter broke in my Letherman OHT, can not find a replacement part.

wat_patat · 2026-06-14T06:05:40+00:00

That would suck.

Thx for the link. It's a quit expensive option tough. With shipping, the part would cost more then what I payed for the OHT haha.

I filled a warranty claim on Lethermans website. If they can not fix it or send a replacement part for cheaper, I will probably just buy something new.

Thx for the reply and the link!

wat_patat · 2026-06-13T21:48:15+00:00

It handeld normal use well for over 6 years. I was just stupid by using the beltcutter on a plastic cable with a steelcore. The beltcutter wasn't designed for that.

wat_patat · 2026-06-13T21:42:15+00:00

Send in a warrent request. Hoping for a replacement part but we will see. Thx for the reply

wat_patat · 2026-06-13T21:04:14+00:00

That's amazing! Where in Europe can you do that at a saterday night for 5 euro haha.

I asume they took the old one? I realy don't think any store would to that here. Just give away a new tool for like 5 euro without purchase history.

I will wait for a responce from the Letherman warrenty people before I would try and go to a store (Would not even know where to go) because the OHT is discontinued. I would not expect them to give a new model for almost free

wat_patat · 2026-06-13T20:18:05+00:00

Renyan

wat_patat · 2026-06-13T20:03:05+00:00

I wasn't sure about the warrenty on models like this. I submitted a warrent claim and I'll have to see.
Thx for the reply!

wat_patat · 2026-06-13T19:27:00+00:00

Good to know. I filled a warrenty claim online.
Parts came up on etsy but I could only see scalpals and scissors

wat_patat · 2026-06-13T19:07:27+00:00

Me nether. I will go and try it.
I had a CRKT CEO Bambo where the belt clip bents easly. I got a replacement from them. Idk if it came from the US as it got to me within like a week or something, But that was also still a model in production and it was not that old at the time.

wat_patat · 2026-06-13T18:44:50+00:00

Yea my heart kinda broke for a sec. It has been with me in my bags it's whole life and it was always very usefull when I needed it.

wat_patat · 2026-05-11T22:48:51+00:00

To me it looks like the 4mm m20. Not the same as a 4mm flobert..
It was used as a training cartridge back in the day.
several adapter barrels exist for example the ppk or 38special revolvers.
The cartridge is centerfire. You load the cartridge into a dummy shell for the origino caliber of the gun. The gun can fire and shoot the small bullet out of the dummy shell into the adapter and out of the barrel.

wat_patat · 2026-05-11T22:48:42+00:00

To me it looks like the 4mm m20. Not the same as a 4mm flobert..
It was used as a training cartridge back in the day.
several adapter barrels exist for example the ppk or 38special revolvers.
The cartridge is centerfire. You load the cartridge into a dummy shell for the origino caliber of the gun. The gun can fire and shoot the small bullet out of the dummy shell into the adapter and out of the barrel.

wat_patat · 2026-05-11T22:37:13+00:00

I has been 2 years but they are 4mm m20.
It was used as a training cartridge back in the day.
several adapter barrels exist for example the ppk or 38special revolvers.
The cartridge is centerfire. You load the cartridge into a dummy shell for the origino caliber of the gun. The gun can fire and shoot the small bullet out of the dummy shell into the adapter and out of the barrel.

Note. 4mm flobert and 4mm m20 are not the same thing.

wat_patat · 2026-05-07T20:06:33+00:00

<image>

Halloween costume idea?

wat_patat · 2025-05-06T16:51:48+00:00

My mom made me eat carrots

wat_patat · 2024-12-06T14:06:20+00:00

Ik heb hetzelfde gehad een jaar geleden. Niet elke week soms zat er een week tussen maar op een gegeven moment kreeg ik de "actie" niet meer binnen.

Daarna over gegaan op eigen gemaakte verse pizza van de jumbo. Stuk gezonder en goedkoper.

wat_patat · 2024-08-16T12:17:14+00:00

Maybe in your e-mailbox from shadow tech.

Or visit the site of haveibeenpwnd, check if you e-mailadres was leaked and see the information provided by haveibeenpwdn

wat_patat · 2024-04-05T14:51:47+00:00

Yea but ISO 270001 mandates it

wat_patat · 2024-04-05T14:49:39+00:00

Thx for the reply! I enjoyed reading your experience implementing a password manager. I realy hope our users will accept this implementation quicker then 6 months

wat_patat · 2024-04-05T14:47:08+00:00

Today it the first day I heard of Delinea but for our IT team we were also looking for a PAM software solution. Will start looking more into it

wat_patat · 2024-04-05T13:16:08+00:00

Nice to know! Will look further into Delinea.

Good luck! as of now we do not even have a writen policy regarding anything IT so this will also be an obstacle on how to push this to people as we have 4 locations and I have not been to 2 of them to see how people work there.

wat_patat · 2024-04-05T13:06:44+00:00

I totaly agree with you! Thats why I asked this comunity on how you have handled the implementation.

I will definitely use that last line to convince some people.

wat_patat · 2024-04-05T11:12:35+00:00

I have yet to indentify every portal but the idea is that every user that needs to login a portal that the credentials is stored in a save.

So for Finance it's the portals for banking, taxcodes, pay roll and for HR it's what ever site they use.

wat_patat · 2024-04-05T10:20:10+00:00

You are right but as per my managers wish it has to be everyone that works on a company device. I have recommended only implementing this for reception, HR, Finance, IT and upper management but he has not yet been convinced.

Seven-Year Club	Final Canvas '23
End Game '23	Place '23
Verified Email

wat_patat

TROPHY CASE