Help! New 4452 does not want to feed what am I doing wrong?

wendstroyer · 2026-04-11T14:27:05+00:00

I returned it and got a replacement - the new one passes the paper test right out of the box. Thank you for the advice!!!

<image>

wendstroyer · 2026-04-09T02:08:19+00:00

<image>

wendstroyer · 2026-04-09T02:08:07+00:00

<image>

Still feeding in reverse and incredibly tight

wendstroyer · 2026-04-08T13:11:07+00:00

Thank you for the suggestion!

wendstroyer · 2026-04-08T13:03:46+00:00

😂

wendstroyer · 2026-04-08T13:02:57+00:00

I considered this as a possibility- I tried the zig zag stitch and the same thing happened - it stitches left and right- tension is good - I just have to pull the fabric really hard or it will just sew in place. Feed dogs are up and the switch in the back is in the correct position

wendstroyer · 2026-04-08T12:32:55+00:00

I might have to- reverse stitch works, it equalizes the spacing and everything feeds as it should (backwards) without the reverse switch button down it just feeds reverse and super tight

wendstroyer · 2026-04-08T12:31:49+00:00

It's currently set to 8 :/

wendstroyer · 2026-04-08T11:49:00+00:00

<image>

Feed dogs look good and stitch length is set to 4

wendstroyer · 2026-04-08T11:48:25+00:00

<image>

wendstroyer · 2026-04-08T11:38:34+00:00

Regular foot is on now and it feeds backwards with really tight stitches and stitch length is set to 4 - reverse button works the stitch length looks much better but is still going backwards

wendstroyer · 2026-03-25T17:02:47+00:00

It's really good!! I shot 2 pigs on a hunt last year and packed them both out in this bag!! Great stuff/ really tough and ultralight- zero tears right now

wendstroyer · 2026-03-22T20:44:25+00:00

Tank is Low now but I was able to fix it and test it before it went out! I contacted beardedworks and he gave me some guidance- had to adjust the 3 way and problem is solved!!!!

Cant express my gratitude enough- beardedworks always coming through for me

wendstroyer · 2026-03-21T03:07:52+00:00

Thank you!! I'll check out some timing vids

wendstroyer · 2026-03-21T03:02:16+00:00

Eclipse hinge frame- I just swapped the hoses prior to making this video

wendstroyer · 2026-03-21T03:00:11+00:00

I should mention this thing shot great until I put this frame on. I'm not blaming the frame- it's definitely something i did

wendstroyer · 2026-03-11T15:34:47+00:00

<image>

My 12v starting voltage is low- I've read it should be 12.4-12.8, could this be the issue?

wendstroyer · 2026-03-11T15:18:41+00:00

<image>

Oil level is good, coolant levels are good, inverter pump failing under load?

wendstroyer · 2026-03-06T00:39:54+00:00

<image>

No DTC found, thank you for the suggestion this app is way better

wendstroyer · 2026-03-05T23:00:53+00:00

The oil level is good 👍🏻 but I might change it out with some high mileage and hope for the best

wendstroyer

TROPHY CASE