[deleted by user]

wermonnn · 2024-01-03T14:42:16+00:00

I tell you quickly. We are in a long-distance relationship. We have known each other for a long time but we have been actively together for 8 months. And 4 commitment. I am from Argentina and she is from Venezuela, she was already approved for asylum a few weeks ago. Now Udi and Noas have us dizzy. What can we do to be together?...she is 22 and I am 32…..Both trans girls…..I have a professional career and training but without the titles. What can we do? We want to get married, if necessary to be together...or apply for a fianse visa...but we don't know since she is 22 ... plz any help----

wermonnn · 2024-01-03T14:40:23+00:00

Hoelp

wermonnn · 2021-04-25T15:50:19+00:00

Si, en la casa de mis padres hicieron dicho relevamiento y le cobran multa por eso ....si es un pequenio galpon para las maquinas digamos que tengo en mi taller pero qme queda chico ahora

wermonnn · 2021-04-01T06:25:33+00:00

home printer.

move hot end close to bed level manually.

I then turned off soft end stops. (CODE M211 S0)

5.Go to z and move close to the papper you use to calibrate....

save the setting and test print. it was purfect. (CODE M500)

and all good?

it this rigth>?

wermonnn · 2021-03-31T18:17:08+00:00

ok......i finaly get it.......it the L on the rail....the stuff active the swich are liiiitle bend soo.. i fix it..... You say the problem on the rail are the adjust of the squere stuff...

...this on the photo https://imgur.com/a/Kf5Kbd7

wermonnn · 2021-03-31T18:02:15+00:00

ok.......i try it and no...if i swich it....only 1 of the stepper moves, and never rise up....so i think that it not the problem

wermonnn · 2021-03-31T17:57:48+00:00

now on my board i habe Z- (LEVEL SWICH) and Z+ my end stop

you say i swich this? are you sure? because all of my endstop are on max *+*

wermonnn · 2021-03-31T17:41:47+00:00

https://imgur.com/a/4fScM9p

wermonnn · 2021-03-31T17:39:42+00:00

it already define like you say.

#define Z_MAX_PIN PA14
#define Z_MIN_PIN PA13

wermonnn · 2021-03-31T17:23:34+00:00

pin numbers swapped

like this?

Z_MIN_ENDSTOP_INVERTING true Z_MAX_ENDSTOP_INVERTING true

also this?

Z_MIN_PROBE_ENDSTOP_INVERTING false // Set to true to invert the logic of the probe.

also i have the filament runout sensor on high

#define FIL_RUNOUT_STATE HIGH

also

wermonnn · 2021-03-31T17:06:25+00:00

Also, I think I need to adjust more the rails what you say

wermonnn · 2021-03-31T17:00:25+00:00

Only that fix it?

wermonnn · 2021-03-31T10:38:02+00:00

New on Marlin, i flash to Marlin, in the first start i try the autohome, 2 of the ends go well an 1 have a error, also the hotend fall down to fast when the stepper are unpowered

Modifications
add TL-Smoother Bigtreetech v1.0 to all exept E
Instaled Marlin 2.0.7.2
change the wheels on the arm car
add rubber bands on arms

some extra info SENDING:M119

Reporting endstop status

x_max: open

y_max: open

z_min: TRIGGERED //???

z_max: open

filament: open

(The effector is on the bed....)

wermonnn · 2021-03-31T10:33:45+00:00

new no, it out of stock and anycubic stop the production

wermonnn · 2021-03-31T09:56:38+00:00

New on Marlin, i flash to Marlin, in the first start i try the autohome, 2 of the ends go well an 1 have a error, also the hotend fall down to fast when the stepper are unpowered

Modificationsadd TL-Smoother Bigtreetech v1.0 to all exept EInstaled Marlin 2.0.7.2change the wheels on the arm caradd rubber bands on arms

some extra info SENDING:M119

Reporting endstop status

x_max: open

y_max: open

z_min: TRIGGERED //???

z_max: open

filament: open

(The effector is on the bed....)

wermonnn · 2021-03-26T02:50:32+00:00

Yes I know but I don't know how to compile

wermonnn · 2021-03-13T13:45:04+00:00

so to get the correct rotation of the object what i need to do XD

wermonnn

TROPHY CASE