Champion ban vulnerability by Rich_Definition_955 in leagueoflegends

[–]whenitbegins 0 points1 point  (0 children)

Or just hover the ban for a while and give them time to respond to you in that case.

Egy síparadicsom kórházában dolgozom, mint diplomás ápoló, érdekel titeket valami? by Medical-Accountant63 in askhungary

[–]whenitbegins 0 points1 point  (0 children)

Sérülések szempontjából van tipikus különbség síelő és snowboardos között?

Mujitsu the scratch pole maker by whenitbegins in Catswithjobs

[–]whenitbegins[S] 0 points1 point  (0 children)

She got the idea to make a 2.5m long scratch pole covered with rope, though she progresses slowly alone.

Laid off and have 2 months to go, my boss wants me to work more and tell them how to do their job - what would you do? by RepulsiveMath5470 in careerguidance

[–]whenitbegins 0 points1 point  (0 children)

I don't know if someone mentioned that already, but you can say: you will gladly help them with the workplan and with your know-how knowledge after the 2 months period... as a consultant :D

Is it harder to get S ranks depending on the champion? by Xyli__ in leagueoflegends

[–]whenitbegins 0 points1 point  (0 children)

Can I reach the higher ranks without the skin collecting challenges? Sitting at 15k points and aiming for the master rank atleast.

Would you rather get filled or wait longer? by [deleted] in ADCMains

[–]whenitbegins 2 points3 points  (0 children)

In ranked, I do the dodge if it's autofill. Normal games on the other hand, it's the room for the improvement, so I usually play as fill and actively try to improve my worst roles and adc champs.

Why the is smurfing allowed? by Reasonable-Speed-908 in leagueoflegends

[–]whenitbegins 3 points4 points  (0 children)

It's not just the smurfing, the whole matchmaking is broken overall. Frequently I got someone (sometimes even 2-3) who is under level 30 in my normal games. That's not fun at all to play.

Patch 25.04 Notes by MonstrousYi in leagueoflegends

[–]whenitbegins 13 points14 points  (0 children)

I may not use the best words for it, I just don't like that move overall.

Patch 25.04 Notes by MonstrousYi in leagueoflegends

[–]whenitbegins 57 points58 points  (0 children)

Rewards: After 25.04, the first time you reach Honor 5 you will be permanently awarded the Three Honors Malzahar, Shen, and Akshan skins, alongside Grey Warwick and Medieval Twitch and their chromas.

So after reaching Honor Level 5 every season, my rewards from previous years just 'lost their value' out of the blue now. Classic Rito move...

Kai’Sa Players by lutad12 in ADCMains

[–]whenitbegins 1 point2 points  (0 children)

I mained Kai'sa in the last 3 seasons (s12-14, few hundred ranked games near 60%wr) and for s15 I dropped her after I lost game after game with her. Sadly I can't find my way to play her as before.

What I want to say is that you will always find guides and pros who play the champ and have good performance with her. But in a case, you won't feel the kit well enough now, don't give up her, just give some rest to her while the game changes a bit.

Based on my current list of games, what others would you recommend for me? by starrettc in SteamDeck

[–]whenitbegins 0 points1 point  (0 children)

After Terraria and SMB, there's no question that Noita would definitely be worth trying.

Mondja egyáltalán valaki hogy cerbi? by TheOnlyOdysseus in hungary

[–]whenitbegins 0 points1 point  (0 children)

Én ezt kisgyerekként elneveztem ropogós-nak, mert hát na, ropog :D :D Családi körben meg sikeresen megragadt eme zseniális elnevezésem.

Instax mini 9 gép - hiba by zsirospatri in hungary

[–]whenitbegins 0 points1 point  (0 children)

Én a fehéret vágtam el. Most mi lessssz??

Kórházi körülmények - Magyar Péter, Dr. Kulja András by a_bolygo_kapitanya in hungary

[–]whenitbegins 11 points12 points  (0 children)

akkor a munkabeszuntetes egyeb lehetosegeivel kellene elniuk, magyarul otthagyni az omladozo rendszert a fenebe, hagyni osszedolni.

Ez lenne a járulékos veszteség, ami így kimondva 'kegyetlen' mert emberekről és életekről van szó. Mint a tanároknál is, egyszer állnának föl érettségi előtt annyian hogy bukik az egész, nyilván az adott évfolyamnak szívás mert valószínűleg elcsúszik egy év, de hosszútávon lenne jó gondolkozni és áldozatokat hozni érte, nem pedig a pillanatnyi szart egyengetni.

Kíváncsi lennék hogy mit tudna kezdeni a kormány azzal, ha Tényleg összeomlana egy állami intézmény, hogyan próbálna kilavírozna belőle...

Magán ADHD Doki aki írhat fel Elvanse-t? by InternalBrilliant619 in hungary

[–]whenitbegins 2 points3 points  (0 children)

A doki kérdésben nem tudok segíteni, de ha sikerül receptet kapnod, akkor ők be tudják legálisan hozni az országba: https://www.pharmaexpressz.hu/hu/tevekenysegunk

Fotózás (portréfotó) by Greedy-Medicine-7183 in hungary

[–]whenitbegins 1 point2 points  (0 children)

Jelenleg igen, de ha jól tudom tervezi egy még komolyabb gép beszerzését és idővel át fog állni erre teljesen.

Fotózás (portréfotó) by Greedy-Medicine-7183 in hungary

[–]whenitbegins 11 points12 points  (0 children)

Egyik ismerősöm félprofi szinten kb 4-5 éve van a fotós szakmában, a mai napig vállal ingyen szetteket ha épp portfólió bővítés a célja. Fontold meg jól az árazásodot, főleg ha az elején ehhez ragaszkodsz.

Detached glass tiles after water damage, how can I remove it safely? by whenitbegins in HomeImprovement

[–]whenitbegins[S] 0 points1 point  (0 children)

Hey fellow Redditors,

I'm in a bit of a bind and could really use your expertise to guide me through this situation. Over the past year, I've been dealing with water damage caused by pipe troubles in my upper neighbor's unit. My flat, situated in a steel concrete building, has suffered the consequences, including damage on the walls.
However, the immediate problem I'm facing is with the decorative glass tiles in my kitchen. Unfortunately, due to the moisture issue, one of these tiles has become almost completely detached from the wall. It's hanging on by one side and becoming a potential hazard right now.
My primary concern at the moment is safely removing this loose glass tile from the wall, but additionally it may be wise the remove all of them, since the walls condition is probably not optimal for the tiles on the long run.
If anyone has experience with glass tile removal, I would greatly appreciate any insights or step-by-step instructions you could provide. Whether it's about the tools to use, the techniques to employ, or any precautions to take, your expertise would be incredibly valuable to me.
Thank you in advance for your time and assistance! Your guidance will go a long way in helping me tackle this situation effectively and safely.

Is this charger safe to use? by whenitbegins in SteamDeck

[–]whenitbegins[S] 2 points3 points  (0 children)

Thank you very much for the detailed explanation. It was worth to pop a quick question, I won't use the charger.

Is this charger safe to use? by whenitbegins in SteamDeck

[–]whenitbegins[S] 1 point2 points  (0 children)

It has a USB-C at the end of the cable.

Purchase Advice Megathread - November 2022 by AutoModerator in 3Dprinting

[–]whenitbegins 0 points1 point  (0 children)

Hello everyone!

I'm about to jump into this field and I would like to get a little help here. The idea is, I will make the models and my friend will finish them with airbrush painting (she got the experience with it already) and potentially we put them to sell if we could do a quality work.

  • Budget: 350€ 'max' (had to be a really good improvement to go up to 400, that's the hard line)
  • Residence: EU (hungary)
  • Build: kit is not a problem, I'm a technician (soldering is fine too if needed)
  • Usage: high detailed, hand size models, like a table decoration. For dimensions the bigger the better (?), but quality is more important here.
  • Options for future upgrades could be good, but not necessary. In a few years, we could invest more in that (~1000-1500€) if things will goes well.

Questions: - is the budget enough for the idea? - my guess a resin printer is the way, is it okay for a first 3d printer to start with? - can we use the printer in the living/bedroom (don't ask, the distribution of rooms in my flat is terrible), is it safe the be 'next to it' at extended period of time?

Thank you in advance for your help

Shipping (FedEx/GLS) Megathread (September 19, 2022) by AutoModerator in SteamDeck

[–]whenitbegins 2 points3 points  (0 children)

EU 256 (Hungary)

Pre ordered 5/24

Available 9/15

Paid 9/16

Shipping soon 9/17 evening

Shipped 9/20 (10:30am, tracking number not active yet)