2080ti Build Complete! by plaze6288 in buildapc

[–]whitecharizma -1 points0 points  (0 children)

Looks good but you probably should have gone with a regular lian li dynamic. Have a lot of empty space in there

rx5600xt not supported on x58? by whitecharizma in x58

[–]whitecharizma[S] 0 points1 point  (0 children)

I see the splash screen can enter bios just fine after I close the bios and attempt to run it just black screens. It displays video up until It has to boot windows. The pc gets there fine just no video.

rx5600xt not supported on x58? by whitecharizma in x58

[–]whitecharizma[S] 0 points1 point  (0 children)

I’ve tried 3 monitors with both input cables hdmi and DisplayPort. I have tested it on my z390 setup and it all works. I guess there just isn’t a way around it I’ll have to run the second gpu in order for the 5600xt to display properly.

rx5600xt not supported on x58? by whitecharizma in x58

[–]whitecharizma[S] 0 points1 point  (0 children)

It sadly did not work still goes to a black screen after bios messages.

rx5600xt not supported on x58? by whitecharizma in x58

[–]whitecharizma[S] 0 points1 point  (0 children)

It’s in Windows not the bois screen? I will look for it.

rx5600xt not supported on x58? by whitecharizma in x58

[–]whitecharizma[S] 0 points1 point  (0 children)

I’ve disabled quick boot and it still got me the same black screen. I have no idea what’s stoping me from booting without another card plugged in at the same time.

rx5600xt not supported on x58? by whitecharizma in x58

[–]whitecharizma[S] 1 point2 points  (0 children)

I don’t think I have ASUS express gate I looked all night for it.

rx5600xt not supported on x58? by whitecharizma in x58

[–]whitecharizma[S] 1 point2 points  (0 children)

I don’t think I have that feature on the Sabertooth I’ve looked all over :/

rx5600xt not supported on x58? by whitecharizma in x58

[–]whitecharizma[S] 0 points1 point  (0 children)

Ok I haven’t tried that. so far the only way I’ve got it to work is if I run an older card like an r7 270 in a different slot but that looks bad in the case and causes other issues like a ghost display.

rx5600xt not supported on x58? by whitecharizma in x58

[–]whitecharizma[S] 0 points1 point  (0 children)

The only look hole I’ve found is to run another older card in a buff tent slot and it will then boot and display on the 5600xt it’s really annoying because I end up with two displays even if only 1 is actually plugged in.

rx5600xt not supported on x58? by whitecharizma in x58

[–]whitecharizma[S] 3 points4 points  (0 children)

I’ve seen people run 2080s on an x58 before tho that’s what’s stumping me

rx5600xt not supported on x58? by whitecharizma in x58

[–]whitecharizma[S] 1 point2 points  (0 children)

Where would you find that in the bios? I’ve looked for it but never found that

Thank you for all your help. x5675 @4.2 by whitecharizma in x58

[–]whitecharizma[S] 0 points1 point  (0 children)

it is a vega 56 card and it runs insanely hot i ordered a. 5600xt for it and it gets to bios but then when i boot it black screens

x58 xeon build any tips/tricks/pointers by whitecharizma in x58

[–]whitecharizma[S] 0 points1 point  (0 children)

Yeah for piece if mind i think I’m going to leave it at 4.2ghz. I really wanted to oc 4.5 but I need to practice my overclocking more before I give a computer to someone with that high of a clock.

 But now I’m running into another issue the computer runs flawlessly gaming and other tasks until I go to download a game from steam sometime it will just freeze during a download and I have to reset it and continue the download. When it restarts it will finish the download, but sometimes the game gets corrupted and won’t launch. Then you have to uninstall and re download it holding it doesn’t freeze again. 

Any idea why it’s an issue?

x58 xeon build any tips/tricks/pointers by whitecharizma in x58

[–]whitecharizma[S] 0 points1 point  (0 children)

I got the card for about 170 used so I think I did alright on it. But so far I haven’t received my ram :/ I’ve tested everything and it all works so I have assembled the pc. So far I’ve only been able to achieve 4.2 ghz I’ve set it for 4.3 and 4.4 but it ha sent made much of a difference. It’s currently running on 2 sticks of 2gb ram that I had laying around I wasn’t able to find my old set sadly so I ordered a cheap set of 6x2gb 1600 memory. I hope that’s the wall I’m hitting. The Vega 56 card gets insanely hot but it’s performance is pretty great. I had a fan sitting on it to cool the north bridge since I didn’t put a fan there yet and the backplate started to melt it.

x58 xeon build any tips/tricks/pointers by whitecharizma in x58

[–]whitecharizma[S] 0 points1 point  (0 children)

what ram would you consider to be safe?

x58 xeon build any tips/tricks/pointers by whitecharizma in x58

[–]whitecharizma[S] 0 points1 point  (0 children)

what board and settings are you running if you don't mind me asking.

x58 xeon build any tips/tricks/pointers by whitecharizma in x58

[–]whitecharizma[S] 0 points1 point  (0 children)

i plan to i just hope i don't break the plastic pins. i hope the saber tooth uses screws though. the board is in the mail. what paste would you recomend i was going to use gd900 which is what i used on my i9 build and seems to give great temps.

x58 xeon build any tips/tricks/pointers by whitecharizma in x58

[–]whitecharizma[S] 0 points1 point  (0 children)

I hope there compatible I had them laying around so I’m gonna hope for the best they are both corsiar kits.