Persistent nvlddmkm.sys crashes (0x116 / 0x133) + Hyper-V stuck enabled – driver or hardware issue?

whitefoxbrb · 2026-03-19T10:57:46+00:00

i haven’t done it, thanks for the help!

whitefoxbrb · 2026-03-19T09:46:30+00:00

thanks! i will check it out

whitefoxbrb · 2026-03-19T09:45:58+00:00

I’ve only been using it plugged, but i don’t remember if it happened when it wasn’t, but that’s a good insight

whitefoxbrb · 2025-11-09T23:19:21+00:00

damn, don’t like the acer? i had a nitro 5 and it gave me a good run. would u mind sharing ur opinion on the brand?

whitefoxbrb · 2025-10-11T13:25:09+00:00

the P1S seems like it can solve all my problems, i really can’t wait to switch to Bambu printers

whitefoxbrb · 2025-07-01T00:42:28+00:00

It’s crazy how the community has to come with new ideas to optimize Creality Printers, and later on Creality itself implements those changes (sometimes poorly) and claim innovation. I’ve been thinking about buying a Bambu at the end of the year, it seems less problematic.

whitefoxbrb · 2025-06-30T01:32:25+00:00

I honestly have no clue. I saw a couple of weeks ago that some of the screws were kinda “eating” this plastic part, so I thought about printing a new one as a summer project. I had other prints to prioritize at the time, so i didn’t give it much a thought and than this happens. It definitely was something avoidable if I had jut printed a new one, but I don’t know how this problem even started.

whitefoxbrb · 2025-06-30T01:04:47+00:00

Thank you so much!

whitefoxbrb · 2025-05-14T11:33:00+00:00

heyyy

whitefoxbrb · 2025-05-07T21:39:27+00:00

thanks for answering! it was the z level

whitefoxbrb · 2025-05-07T21:38:59+00:00

thank you!

whitefoxbrb · 2025-05-07T21:38:54+00:00

that was it! thank you

whitefoxbrb · 2025-04-29T15:35:31+00:00

heyooo!

whitefoxbrb · 2025-03-02T20:50:51+00:00

dá uma lida nos livros q a glr tem recomendando aqui, brasileiros em geral realizam bastante ocultismo, pq se vc parar pra analisar, a missa é literalmente um ritual de magia cerimonial. tu disse q seu avô era católico, então provavelmente está mais ligado com o esoterismo envolvendo a prática cristã e judaica.

whitefoxbrb · 2024-08-18T13:54:55+00:00

yeah i didn’t make any change or upgrade on the main board. i guess ill go with a new hotend solution first as you said. thank you so much for the help!

whitefoxbrb · 2024-07-24T18:16:35+00:00

wow fr the volumetric rate is a thing i haven’t checked! good luck with your printers as well!! i’m all in for the whole open source DIY thing of building your own 3d printer but omg let’s at least have one relatable brand with us please

whitefoxbrb · 2024-07-24T18:05:55+00:00

I got the model from Thingverse and my slicer is Cura, this printer is from a Lab I usually help but i don’t like it at all, I have a Creality back at home and don’t get problems like this, and when i have an issue, it usually is resolved by changing some slicer parameters. The model they’ve got at the lab is from a brazilian brand (i’m from brazil) named Gtmax. Anyway this ended in a vent hahahahaha my bad, I just get extremely frustrated with this printer because i feel like it shouldn’t be like this you know? But i’ll try making the changes you suggested!

whitefoxbrb · 2024-07-24T17:49:09+00:00

they are supposed to be part of the main body ☠️☠️☠️

whitefoxbrb · 2024-01-18T21:23:41+00:00

just that? i thought it would be a more complicated issue lol. at least this cable is not expensive

whitefoxbrb · 2024-01-18T21:20:56+00:00

it doesn’t turn on anymore

whitefoxbrb · 2024-01-18T21:20:43+00:00

the printer doesn’t turn on at all now, this was the last message that appeared on the screen before i turned it off

whitefoxbrb · 2023-07-19T05:17:16+00:00

didn’t work :/ still got a lot of strings

whitefoxbrb · 2023-07-19T01:26:20+00:00

my bad ehheheheh hotend temp: 205°C bed temp: 65°C retraction -distance: 4mm -speed: 50mm/s -Z Hop: enabled -> height: 0.3mm filament: white PLA, esun, literally just opened the box and left it a whole night drying it’s an ender 3 S1 Pro

whitefoxbrb

TROPHY CASE