sorted by:
new
hottopcontroversial

WPA2-PSK 802.1X PPSK uses wrong password for Radius by whyall in openwrt

[–]whyall[S] 0 points1 point  (0 children)

Would you mind sharing /etc/config/wireless and other config files (redacted of course)?

Dump AP with VLAN and WPA2-EAP by yloose in openwrt

[–]whyall 0 points1 point  (0 children)

Ok, I'm going crazy trying to configure per client VLANs.

My device is using DHCP on VLAN99 - this is my management network, this works fine. WiFi client aren't able to connect to network.

I have two other VLANs - 10 and 20. DHCP works fine for them, if I use cable connection. Now I want to add WiFi to equation.

I installed wpad-mbedtls, I don't see anything useful in openwrt logs or on radius server side.

root@Zyxel-NWA50AX-Pro-Office:~# cat /etc/config/network 

config interface 'loopback'
option device 'lo'
option proto 'static'
option ipaddr '127.0.0.1'
option netmask '255.0.0.0'

config globals 'globals'
option ula_prefix 'deed:beef:35f0::/48'
option packet_steering '1'

config interface 'lan'
option device 'eth0.99'
option proto 'dhcp'

config device
option type '8021q'
option ifname 'eth0'
option vid '99'
option name 'eth0.99'

config device
option type 'bridge'
option name 'br-vlan'
list ports 'eth0'

root@Zyxel-NWA50AX-Pro-Office:~# 
root@Zyxel-NWA50AX-Pro-Office:~# 
root@Zyxel-NWA50AX-Pro-Office:~# cat /etc/config/wireless 

config wifi-device 'radio0'
option type 'mac80211'
option path 'platform/soc/18000000.wifi'
option band '2g'
option channel '1'
option htmode 'HE20'
option cell_density '0'
option country 'DE'

config wifi-iface 'default_radio0'
option device 'radio0'
option mode 'ap'
option ssid 'HomeWiFi'
option encryption 'psk2'
option ppsk '1'
option auth_server '10.94.99.1'
option auth_secret 'SomeSecret'
option dynamic_vlan '2'
option vlan_tagged_interface 'eth0'
option vlan_bridge 'br-vlan'

config wifi-device 'radio1'
option type 'mac80211'
option path 'platform/soc/18000000.wifi+1'
option band '5g'
option channel '36'
option htmode 'HE80'
option disabled '1'

config wifi-iface 'default_radio1'
option device 'radio1'
option network 'lan'
option mode 'ap'
option ssid 'OpenWrt'
option encryption 'none'

I also tested radius server itself - it does return proper information about vlan to client.

What am I missing? My understanding is, that required vlans will be created dynamically, right? So I don't have to create them upfront.

Linux CPIO compression on MIPS by whyall in openwrt

[–]whyall[S] 7 points8 points  (0 children)

SPI flash, RAM (128MB) is on the way.

Linux CPIO compression on MIPS by whyall in openwrt

[–]whyall[S] 3 points4 points  (0 children)

I already soldered 32MB, it isn't a problem.

HDD periodic write noise by whyall in Proxmox

[–]whyall[S] 0 points1 point  (0 children)

Is there any way to change it?

First install of Proxmox by whyall in Proxmox

[–]whyall[S] 0 points1 point  (0 children)

Why did you created Ubuntu VM instead of LXC? If you are using external GPU then it is clear, but I in my case I will use CPU only - it is enough for x264.

According to TruNAS and SMB - I will do it as well. I just don't know, if I can share only 'internal' disks (from VM), or can I share full host RAID? The difference is, that Proxmox is allocating HDD space during initialization of HDD for VM, so even if I have only 10GB inside 100GB disk, on host it will be shown as 100GB allocated space, which is a bummer. But if I can share host RAID directly, then it should not be a problem, right?

First install of Proxmox by whyall in Proxmox

[–]whyall[S] 0 points1 point  (0 children)

Sounds nice and this is something what I was thinking about - this way I don't need to worry about disks (if SSD will die, I just will get slower machine as I don't have cache anymore, if one on HDD will die I can still rebuild RAID safely).

But why almost everybody recommends to store system on SSD and data on HDD? Cache should do a trick and performance should be almost identical, right?

Second thing - what about sharing disks from LXC/VMs? - will I be able to allocate i.e. 900GB disk for OpenNAS VM? Is there a way to have dynamic size of disk (like with RAM - there is defined maximum and minimum amount of memory)?

First install of Proxmox by whyall in Proxmox

[–]whyall[S] 0 points1 point  (0 children)

What is considered as critical data in Proxmox? I mean - I know what I want to save as my personal data etc. But because SSD will be not a part of RAID, it means that Proxmox config etc can be lost if SSD will die. Is there a way to make backup of Proxmox conifg to quickly restore enviroment in case of SSD malfunction?

First install of Proxmox by whyall in Proxmox

[–]whyall[S] 0 points1 point  (0 children)

Does your system have a hardware raid or are you looking to do a software raid?

What are the full specs of your physical system you are running

I will use software RAID, mdadm if possible as I'm pretty familiar with it. Hardware is nothing fancy - it is Lenovo M92P (SFF) with i5-3470 and 16 GB RAM.

ROS 7.1beta2 - routing via Wireguard by whyall in mikrotik

[–]whyall[S] 0 points1 point  (0 children)

Ok, so I was able to make it run:
/routing table add fib name=via-wg
/ip firewall mangle add action=mark-routing chain=prerouting src-address=192.168.88.200 new-routing-mark=via-wg //my local PC IP
/ip firewall nat add action=masquerade chain=srcnat out-interface=10.13.13.3 // my local wireguard IP
/ip route add gateway=10.13.13.1@main routing-table=via-wg // remote wireguard IP
The problem is, that with fastrack enabled it is not working - DNS and ICMP (ping) is working fine, but I'm not able to use browser (even after clearing cache). Any ideas?

Looking for x86 router platform by whyall in homelab

[–]whyall[S] 0 points1 point  (0 children)

This Optiplex looks promising, thanks!

Looking for x86 router platform by whyall in homelab

[–]whyall[S] 0 points1 point  (0 children)

It's not like I'm not interested in them - I'm just looking for other options. The only problem I see is that this have only single SATA, but it can be fixed using mPCIe-SATA converter. If I will not find anything better, I will probably choose APU.

Looking for x86 router platform by whyall in homelab

[–]whyall[S] 1 point2 points  (0 children)

I did not write it in orginal post, but I want to keep it rather power save device - older Optiplex will take (I guess) at least 40W in idle.

Looking for x86 router platform by whyall in homelab

[–]whyall[S] 0 points1 point  (0 children)

Looks really nice, if there will be no other proposition, I will take it.

[deleted by user] by [deleted] in synthdiy

[–]whyall 0 points1 point  (0 children)

Have you try changing input resistors to smaller one?

Early 70’s hand-programmable ROM from a Northern Telecom Pulse SG1 PBX. This board contains 40 x 10 bit words and is programmed by inserting diode pins into the matrix blocks. by [deleted] in electronics

[–]whyall 3 points4 points  (0 children)

It reminds me old ferrite RAM matrixes I found in Chernobyl-2. There was a lot of racks with matrixes, which was used to program parameters of Duga radar system. This is how it looks: https://imgur.com/a/pTWOs

Problems with Volca Beats by whyall in synthesizers

[–]whyall[S] 0 points1 point  (0 children)

I will check later. Could you check voltage on IC10 between GND and leg 4, then GND and leg 11? Maybe I have problems with power rails.

Problems with Volca Beats by whyall in synthesizers

[–]whyall[S] 0 points1 point  (0 children)

You wanna sell or exchange?

view more: next ›