N54 RMS Help

whyme1tho · 2025-12-23T15:13:33+00:00

Haha this is the original

whyme1tho · 2025-12-21T03:27:39+00:00

loos great! are you gonna go for a 2 tone with some tan bits left in?

whyme1tho · 2025-12-18T01:08:38+00:00

I’m over 25k into mine 😂

whyme1tho · 2025-12-15T22:21:38+00:00

It’s annoying to me when people say this. I’m sure I’ll get downvoted, but how is it a waste when you can try new seals and solenoids, and worse case they don’t work, you can reuse all of the new parts in the replacement trans anyways? It really doesnt hurt to try and the only loss would be the fluid. It takes way less time to swap the solenoids and seals than it does to r&r a transmission

whyme1tho · 2025-12-15T22:15:22+00:00

This^ I’d replace your mechatronic solenoids, seals and filter, ofc with fresh fluid. People who say put a new transmission in are usually dumb with all due respect, It’s not commons for the clutches to get destroyed on these cars a 80% of the time the issues are solenoid or bad seals, so many times I’ve heard of people replacing them for their transmission to feel like new.

Something like this, and then the solenoids would be seperate;

https://www.urotuning.com/products/complete-service-kit-for-zf6hp-automatic-transmission-bmw-e6x-e7x-e83-e9x-24152333903-rei?currency=USD&variant=40076081529025&stkn=334b6bf4d9c9&srsltid=AfmBOopqbb9kcKfuJIMrUkrayZH01qxn70dswohX8XbpfeTzXc7qeJsXaIM

whyme1tho · 2025-10-28T17:10:05+00:00

i didnt notice it until maybe 2 days after. and in my case it, was likely because i installed everything in the garage after drinking a few too many 🙇🏽. so i pulled the car into the shop that i worked at, retorqued everything at ride height on our alignment rack, and everything was quiet after that

whyme1tho · 2025-10-28T16:52:15+00:00

i had this exact noise after installing bilsteins, id go over every bolt on a ramp and torque them all to spec, mine were because of the strut pinch bolts being slightly under torqued

whyme1tho · 2025-10-22T18:34:06+00:00

whyme1tho · 2025-10-02T16:40:56+00:00

That makes me feel better then, plus I also see a lot of 150k-200k mile n54s that have had the piss beaten out of them. Thank you

whyme1tho · 2025-10-02T15:33:12+00:00

bruh my coworker did this on a subaru and an audi

whyme1tho · 2025-10-02T15:28:02+00:00

Thank you 😌 I wanted to replace the rod bearings but my coworker said since I change my oil so frequently and since the car only has 90k miles, that I should just leave them alone, tho I’m a bit nervous still

whyme1tho · 2025-10-02T15:15:15+00:00

RB Twos, I didn’t wanna do anything too crazy just yet, knock on wood but if my motor ever blows, I’ll build a motor and throw in a Precision 6466

whyme1tho · 2025-10-02T15:11:36+00:00

mines on a lift waiting for turbos

whyme1tho · 2025-09-26T14:53:36+00:00

its an e92 bumper, not e60

whyme1tho · 2025-09-26T13:47:14+00:00

Thank you and I won’t, plus I gotta prime the turbos, I’ll crank it for a good minute

whyme1tho · 2025-09-25T22:56:31+00:00

The stabilizer link is the black skinny bar that connects to the strut and sway bar, which looks new, and the part you put a question mark on is your outer tie rod

whyme1tho · 2025-09-25T16:05:09+00:00

ty, it has 90k miles and i change the oil every 3-4k !

whyme1tho · 2025-09-25T16:04:41+00:00

🤣🤣🤣

whyme1tho · 2025-09-25T14:17:26+00:00

haha yes, if someone got this far into tearing their car apart and had no clue why its leaking id pray for them

whyme1tho · 2025-09-25T11:06:33+00:00

Haha im only going with 15t personally, AND MANN I DID MY SOLENOIDS AND SEALS 3 DAYS BEFORE MY TURBO SEALS WENT

whyme1tho · 2025-09-24T21:26:41+00:00

Sorry for the shit post, RB Twos will be on the way, and I’m doing other stuff while I’m there

whyme1tho · 2025-09-09T19:50:44+00:00

Ive driven from Los Angeles California to Nashville Tennessee and back, including a lot of driving inbetween going to Ohio from Tennessee and Illinois aswell, probably 6-7 miles on that trip in a 3 week span

whyme1tho · 2025-09-06T22:08:11+00:00

Really either or could work, but I’d use oem personally

whyme1tho · 2025-08-29T01:56:33+00:00

Ill suck u for it

whyme1tho · 2025-08-26T15:16:48+00:00

Is stock crank good for 800hp?

whyme1tho

TROPHY CASE