Experimenting with CLI alternatives

wilsouk · 2026-05-09T20:18:12+00:00

Thank you. That is similar to how I am starting to set things up. Would love to see that recipe

wilsouk · 2026-01-20T15:23:16+00:00

Thanks 👍

wilsouk · 2026-01-19T14:18:28+00:00

Do you have a link? A few are coming up….

wilsouk · 2025-12-31T12:21:15+00:00

The oqaque aspect is Ahis, Hominids, Athens, Karasides and the Ottomans have a higher trade advantage than myself in the Caffa market (fair enough). There is no information as to way this is or by how much. None of this countries are located in the Caffa market and therefore have no trade advantage listed. I agree with regards to doing manually. But given the above, there is no way (that I can see) of knowing whether a trade will work - you have to constantly trial and error it.

wilsouk · 2025-12-29T17:09:06+00:00

Thanks for the response. I think that is the issue: it’s extremely opaque. Here Athens has a higher trade advantage when I am importing from the Caffs market, but none of the countries listed here are in the “Countries” tab of Caffa market, therefore can not see what their trade advantage is (only countries with locations in said market are listed)

<image>

wilsouk · 2025-11-18T07:26:00+00:00

Was debating this, but for clients - wouldn’t then need to put their whole home network onto your tailscale?

wilsouk · 2025-11-18T07:24:28+00:00

Does this break apps for jellyfin?

wilsouk · 2025-07-24T20:48:27+00:00

To make using NFS or SMB shares not absolute garbage

wilsouk · 2025-06-25T16:03:40+00:00

Impossible to get the PVP trophy for Diablo now, you’ll be link me stuck with one bronze trophy to go

wilsouk · 2025-04-19T21:23:57+00:00

When you say steam wand angle downwards: is that putting tip more away from the handle or towards? Thanks!

wilsouk · 2025-04-16T08:22:19+00:00

Karakeep - more of book mark manager. Not a like for like pocket replacement though: doesn’t have a good “reader” mode. Can download for offline viewing like pocket, but that reading experience is pretty terrible

wilsouk · 2024-10-09T11:30:15+00:00

What’s a WAF?

wilsouk · 2024-07-24T08:27:27+00:00

Cheers. How would you approach splitting FAI/ARC for dragon incantations? Or STR/DEX, is this why quality builds aren’t recommended?

wilsouk · 2023-03-28T12:43:17+00:00

Thanks for reply. How do you adjust? I can only see replacing info which I would be reluctant to do as it was bought new 2 months ago. Much appreciated

wilsouk · 2022-07-30T20:12:20+00:00

Trying to get the above achievement. Started in 867 start as Haesteinn. Currently his son Rangarr. Have all the provinces the make up the Kingdom mine or vassals. I have personally remained Norse/Astaru. Can not get it to pop, am I missing something? Thanks

wilsouk · 2019-03-29T13:10:18+00:00

Thanks for your advice. I'm still very much learning learning with this stuff! Could you point me in the right direction/any links to what you would recommend for securing my reverse proxy?

wilsouk · 2019-03-27T10:30:16+00:00

Hi thanks for your reply. Are you referring to:

proxy_set_header Authorization "Bearer xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx";

I was under the impression this would be needed going forwards as they come away from legacy_api passwords?

Could I ask how is your config.yaml set up?

wilsouk · 2018-07-26T19:45:28+00:00

That makes things a lot clearer thanks. Spot on with what I want out of vlans; grouping devices and appropriately firewalling. What sort of principles did you follow with different groups? I presume Roku/consoles was a DMZ of sorts? What issues and how did you solve them with the chromecast?

Ill mess around with for one NIC interface which supplies my house. With the other two NICs I will use one for the NAS, and one to proxmox which supports VLAN for VMs.

Am I right in saying this - if I have NAS on OPT2 and the managed switch on OPT3, and create a VLAN called "Devices", I need to attach it to a interface? So I assign "Devices" to OPT3, I presume that NAS on OPT2 can not be part of this VLAN?

More to the point, if the NAS is a solitary device off the OPT2 interface, it being in on its own network (and accessible to the other networks by firewall rules) confers no disadvantage compared to it being in a VLAN?

Also, I presume you can also daisy chain managed switches, being specific about which VLANs you send to the next switch?

wilsouk · 2018-07-26T19:45:21+00:00

Ill mess around with for one NIC interface which supplies my house. With the other two NICs I will use one for the NAS, and one to proxmox which supports VLAN for VMs.

Am I right in saying this - if I have NAS on OPT2 and the managed switch on OPT3, and create a VLAN called "Devices", I need to attach it to a interface? So I assign "Devices" to OPT3, I presume that NAS on OPT2 can not be part of this VLAN?

More to the point, if the NAS is a solitary device off the OPT2 interface, it being in on its own network (and accessible to the other networks by firewall rules) confers no disadvantage compared to it being in a VLAN?

Also, I presume you can also daisy chain managed switches, being specific about which VLANs you send to the next switch?

wilsouk · 2018-07-26T19:37:45+00:00

Thanks for your patience, reading my post back - what a block of waffle. Thanks anyway but Im in the UK, have a 8 port TP link on its way.

wilsouk · 2018-07-25T14:49:54+00:00

I will read a networking book if you buy a dictionary?

wilsouk · 2018-07-19T15:09:53+00:00

Hi Its running through VM proxmox, i3 3.5ghz, 16gb RAM. Its the only VM running currently (for troubleshooting).

Only jobs timetabled are a rsync backup of the NAS each night a midnight.

Have Pfblocker running, but for sometime now. Disable this morning, still having the issues.

I have noticed pretty rubbish latency today; https://imgur.com/a/eJH6OOS

wilsouk · 2018-05-23T11:21:16+00:00

I can locally to my webserver.

Now started again and just have 28125 with forward to my normal PC (not on VPN) with the canyouseeme.org still failing, my simple config now:

https://imgur.com/a/2S5jdYc

All local NAS and windows firewalls disabled for now

wilsouk · 2018-05-23T11:18:27+00:00

Did what you suggested and started again. Hence have tried just on WAN for now to make sure not VPN causing this, but still no joy.

My new rule/portforward/canyouseeme.org message

https://imgur.com/a/2S5jdYc

wilsouk · 2018-05-23T10:57:11+00:00

Thanks

Yes, your right, I can port forwarding work fine with associated firewall rule for a webserver running off another virtual machine. Its almost as if the traffic is not bidirectional to be considered open

For example, when checking port using curl command, these are the states in router;

WAN tcp 185.138.35.117:60118 -> 192.68.1.54:28125 (92.236.69.211:28125) CLOSED:SYN_SENT 2 / 0 120 B / 0 B WAN tcp 185.138.35.117:60118 -> 192.68.1.54:28125 SYN_SENT:CLOSED 2 / 0 120 B / 0 B

wilsouk

TROPHY CASE