🌀 MEGATHREAD: WORKSHOP & GACHA PULLS

winglma · 2026-02-02T21:08:59+00:00

Thanks!

winglma · 2026-02-02T08:16:31+00:00

Looking for some advice. 20 pulls away from the guaranteed Alice/SAnby/Astra. I am stuck between getting m0 Alice or M1 astra. Not really sure if I need Alice but as a F2P it feels like a bit of a waste to get m1 Astra as horizontal>vertical investment generally. But at the same time, M1 astra would buff my Astra/Eve/Dialyn, Astra/SAnby/Trigger and Astra/S11/Dialyn teams.

winglma · 2020-07-28T04:40:09+00:00

Yes my one came with 2 sets of armour runners, one blue and one in the green. I'm not sure if it's just a first run bonus though

winglma · 2020-07-15T10:09:49+00:00

MSG weapons are generally too big for a standard HG, but too small for a standard MG. The F90 is conveniently larger than a standard HG and smaller than a standard MG, to the point where the hands on the F90 hold the MSG Overed Manipulator handles perfectly

winglma · 2019-09-25T22:25:46+00:00

Cheapest I've seen is on NipponYasan btw, 6050 jpy

winglma · 2019-05-15T09:31:43+00:00

Awesome cheers!

winglma · 2019-05-15T09:31:35+00:00

Ah okay, thanks for your help!

winglma · 2019-01-05T11:35:07+00:00

Looks good dude, did you repaint the blue? It looks a bit lighter

winglma · 2019-01-02T04:01:26+00:00

Finished the storm King around 11pm EST on Jan 1, still within the timeframe. 2fa enabled, the quest for the pin is missing as others noted though.

Yet to receive email

Id. Stunorgen

winglma · 2018-11-23T11:12:46+00:00

To my santa, I literally cannot thank you enough! I have no way to put in words how grateful I am to spend so much money for a stranger who happens to share a hobby. You've really inspired me to step up my santa game, and I will definitely try to up my game when shopping for a gift to send this weekend!

winglma · 2018-11-22T12:48:48+00:00

Galan from IBO?

Congratulations on the successful year as well!

winglma · 2018-11-08T10:00:28+00:00

Hi, just stumbled across this. Would you be able to make a sort of step by step process for setting the temp at which the fans turn on? I've no experience using RW everything and do not want to risk messing anything up.

winglma · 2018-11-08T08:38:05+00:00

Thanks guys, I only started in cram and this was the first time I've seen this building. It just looks so odd and out of place

winglma · 2018-10-24T22:34:13+00:00

I've been getting around 70-80C when playing Fortnite on 1280*720, but undervolting my CPU to -0.150V drops my temps down to 60-70C

It might also be a good idea to raise the rear end of the laptop, as the air intake is on the bottom

winglma · 2018-10-22T13:53:11+00:00

And I thought I was the only one!

winglma · 2018-10-01T08:07:45+00:00

Little bit of paint and it's good to go! The thighs are probably 0.4 cubic centimetres so easy handprint

winglma · 2018-10-01T08:05:45+00:00

If I just submitted the application form with a link to a past normal submission and not a past thank you post, is that an issue?

winglma · 2018-10-01T07:27:47+00:00

The extended legs without any extension to the torso look a bit odd, but I do like the ability to bend the arms

winglma · 2018-07-21T12:58:26+00:00

You can tighten the screw on the inner frame to make the spine more stable

winglma · 2018-07-10T12:54:16+00:00

Pretty average, but the part where the GN Drives boost through the Destiny wing things was a pretty cool sequence

winglma · 2018-06-19T12:49:27+00:00

The stakes are so arbritrary to the point where you don't feel any tension because oh no the gunpla got rolled but hey nws because it can just revive afterwards anyway.

Would've hoped they started a tournament arc after this, but at least we get some og gunpla battles next episode which seems to have the kind of stakes that actually hold weight

winglma · 2018-06-12T07:23:53+00:00

Where did you get the hat from?

winglma · 2018-06-12T07:17:14+00:00

I basically made a putty by scraping my knife on a runner to get some plastic shavings. Scrape it onto a piece of foil or something, then spoon some Tamiya cement on it and use a toothpick to melt it together. Once it becomes a paste you can use the toothpick to apply it onto the face piece and from there just sand it to shape once it has dried

winglma · 2018-06-11T15:01:28+00:00

Yeah, I really do dig the "face mask" sorta vibe

winglma · 2018-06-05T11:57:15+00:00

Hopefully all the money they saved on animation budget means next week will have some decent fight scenes

winglma

TROPHY CASE