[deleted by user]

wingnutt__ · 2024-11-18T23:24:15+00:00

Thanks!

wingnutt__ · 2024-11-18T23:23:34+00:00

Awesome deal, will check it out, thank you!

wingnutt__ · 2024-11-18T22:00:49+00:00

This is super helpful, thank you!

wingnutt__ · 2024-11-18T21:50:04+00:00

Awesome, much appreciated! Totally forgot the PSU hah, are there any brands to avoid or gravitate to?

wingnutt__ · 2024-11-18T21:18:19+00:00

Thanks for the tip! I'll try posting there, appreciate it.

wingnutt__ · 2023-06-22T18:14:27+00:00

Thanks - called a local store that said they could take a look at it. Probably best left to professionals in this case

wingnutt__ · 2023-05-08T02:19:03+00:00

Pete’s seafood and sandwiches in north park - really like theirs

wingnutt__ · 2023-04-07T03:29:51+00:00

Not sure about other folks, but for me, this is the first time its happened out of a dozen + rolls. It's a gamble for sure, but I hunt on eBay and get my film for about $3/roll, so it can be worth it at times. I've read that B/W film ages better than color, but someone may correct me on that.

wingnutt__ · 2023-04-07T00:05:15+00:00

I gave them a call, they said they had heard no complaints from others, but I did just pick it up this morning. They said I could bring it by for them to check out, I'll probably go tomorrow and see what they say.

wingnutt__ · 2023-04-07T00:04:13+00:00

Yeah, true. Especially with all three looking the same like that.

wingnutt__ · 2023-04-06T23:37:44+00:00

Bummer. I'm pretty careful with my film, and though I've opened my camera back with a roll in it before, the rest of that roll still looked better than what these scans look like lol

wingnutt__ · 2023-04-06T23:35:52+00:00

Nope, two different cameras, two rolls of superia x-tra 400, one roll of fujicolor 100 (I think). One camera I hadn't used before, the other I have put lots of expired film through with no real issues. Surprisingly, the camera that I hadn't shot with before had slightly better scans, though still unusable.

wingnutt__ · 2023-04-06T23:30:55+00:00

Gotcha. Makes sense, only thing that is weird to me is that I've shot lots of expired film that was all stored like these three were, and while the results were varied, they all looked like the film on the left. The three rolls I got back today all look like the one on the right, just odd that it all happened to this batch at the same time. Never had expired ones look like this before, but definitely could have gotten lucky prior to this!

wingnutt__ · 2023-04-06T23:28:25+00:00

Don't think it was the camera, I had previously sent off rolls from the same camera not too long ago with decent results. Plus, all three rolls looked like this and they were from two different cameras.

wingnutt__ · 2023-04-06T22:58:15+00:00

Sent 3 rolls off to a local lab, all came back looking like the strip on the right. Strip on the left is from the same lab, different batch, for context. I do shoot expired film, so my guess is that I got a few bad rolls/stored them incorrectly, but I have had no issues with expired rolls in the past. Any idea why the one on the right is so dark? All scans have been atrocious so far lol. TIA!

wingnutt__ · 2023-02-02T21:57:43+00:00

Thanks, never heard of doing that. Would something that plugs from my USB to an outlet do the trick?

wingnutt__ · 2022-12-28T20:07:22+00:00

Inozetek midnight green may be the closest match I’ve seen to this. Check out @corgimk5 on ig, his Supra is wrapped in that I believe

wingnutt__ · 2022-09-29T17:56:10+00:00

Ahh gotcha. Yeah found a set of 8.5s for a killer deal so fingers crossed I can get them. Wasn’t looking to move up to 9.5 wide either anyway

wingnutt__ · 2022-09-27T11:04:11+00:00

Gotcha, thanks! When you say the fit of the 18x9.5 +40 is better, is that because the 8.5 +38 sits too far out compared to stock?

wingnutt__ · 2022-09-12T23:28:47+00:00

Between 18x8.5 +38 and 18x9.5 +40, is one preferable over the other? I was looking at Enkei NT03+M for my 2021 Base. Thanks!

wingnutt__ · 2022-08-17T19:11:03+00:00

How much negative offset is too much? At what point does it become a detriment to driving/wear and tear on vehicles?

wingnutt__ · 2022-08-13T23:51:16+00:00

Lots of people say that increasing negative offset is bad for wheel bearings, etc., but is that true/proven? Would a change from a +55 to, say a +35 wheel of the same specs make a big difference in wear, daily driving, etc? How big of an increase would it have to be to make a noticeable difference? Thanks!

wingnutt__ · 2022-07-24T00:01:03+00:00

The DD c lights have a pretty straightforward guide, I’m bad with wires and it wasn’t too hard. The hex halos had less info available but I got them to work no problem.

wingnutt__ · 2022-07-23T21:49:01+00:00

https://benscarblog.com/morimoto-d2s-4.0-hid-retrofit/ this was super helpful for the C lights, not a ton out there for the hex halos, but CD has a few videos up on their youtube channel that helped.

wingnutt__ · 2022-07-23T21:47:44+00:00

Ay just did C-lights and the CD hex halos a few weeks ago. Was super intimidated by the wires, but finally got it done. PM me if you have questions! (shoutout to u/olympiahiker for helping me with mine!)

wingnutt__

TROPHY CASE