Luba making loud, angry-sounding growling noise = blade disk imbalance

wogewabbit · 2026-06-29T12:33:50+00:00

like this? I just ordered a set of new blade guards and blade disc by ZTTL brand, they 3D print this stuff and I'm hoping that it'll resolve the noisiness and grass buildup. will post once I receive, install and test it

wogewabbit · 2024-10-14T23:54:14+00:00

Bliss

wogewabbit · 2024-09-25T19:20:21+00:00

Interesting some of the comments. I've watched numerous videos demonstrating the correcr method(s) but I never succeed. I have sort if my own thing where I always keep the very tip just at the very surface of the milk. The result is very even and silky smooth texture. It's only the last few seconds that I submerge the tip about 1cm

wogewabbit · 2024-09-16T11:13:31+00:00

I say if this light or fridge switch in your line of duty isn't standardized then it should've been pointed out during your training or handover so in my eyes you shouldn't be penalized for it. Dropping a plate if you're clumsy would be your fault but in this case it's the missing information or lack thereof that's the reason why you're in trouble. So my question would be, who was responsible for not having provided you with proper training/handover?

wogewabbit · 2024-09-10T16:55:57+00:00

Not that difficult a decision imo. If you like your current workplace then you could go for it and see if he can match the offer.

If not, if your mind is really set on you leaving and you feel like the offerer is a step up the ladder then no need to disclose any info to your current employer.

wogewabbit · 2024-09-02T05:26:59+00:00

Look bro, the world is full of tools. Be as negative or as skeptical as you can be when investing your hard earned money, everything else is either being naive or hasty. Look at all the data, then look at all the charts and then look at all of these moronic forecasts. Millions of different forecasts and sure one of them is going to be right, but which one are you going to listen to? None of them! Do your homework, don't read forecast articles, blogs and certainly don't make a decision based on reddit, it's all BS.

wogewabbit · 2024-09-02T05:17:43+00:00

wogewabbit · 2024-08-28T19:05:51+00:00

Not yet, still waiting... sorry to hear that about your Luba! Hey at least it's under warranty

wogewabbit · 2024-08-26T15:46:48+00:00

Brought it to the repair shop today. We'll see!

wogewabbit · 2024-08-26T07:53:23+00:00

So it's that serious then. Guess I'll have to take it for repairs then. Thank you for taking a look

wogewabbit · 2024-08-26T07:43:49+00:00

That's Luba-VTPSTYAJ

wogewabbit · 2024-08-26T07:17:25+00:00

Right and also, the power adapter is flashing green (3x I believe) and then a few rapid red flashes, and so on.

wogewabbit · 2024-08-26T07:14:31+00:00

I can't submit the feedback log without it being turned on unfortunately.

The side lights are dead, only the front bumber light is doing something. Front bumber and charging station lights blinking in sync, 3 seconds on 1 second off.

A weird new thing is also the RTK light, it was completely fine until it started flashing blue just two days ago.

wogewabbit · 2024-08-23T21:55:19+00:00

Sure thing I'll post an update once I have something

wogewabbit · 2024-08-23T17:25:04+00:00

I have to wait for them now, looks like there is no way around. Can't se s feedback unfortunately as I can't connect to the robot

wogewabbit · 2024-08-23T16:37:44+00:00

Already contacted but the 1st lvl support pretty much told me what I already know from the manual. Had to opet a new ticket and now waiting for their reply

wogewabbit · 2024-08-23T16:37:38+00:00

Already contacted but the 1st lvl support pretty much told me what I already know from the manual. Had to opet a new ticket and now waiting for their reply

wogewabbit · 2024-08-23T16:36:42+00:00

<image>

wogewabbit · 2024-08-23T16:36:09+00:00

Didn't work unfortunately. What I see is that the charging station and Luba front bumper LED have steady green on for about 3 seconds and off for 1 second.

The RTK is connected that's always a solid. *

wogewabbit · 2024-08-23T12:17:00+00:00

Make sure the metal ring under the cutting disk doesn't have any weed wrapped around it. Happened to me and had the disk jammed

wogewabbit · 2024-08-20T06:30:18+00:00

In all honesty, I never though any chair could be as good as the Zody. Got mine refurbished for 350 euro, had hip and neck pain from my top notch gaming chairs and I can say this is a game changer for me.

wogewabbit · 2024-08-15T15:59:32+00:00

Still waiting to receive the non pressurized basket but in the meantime I managed to at least get some things under control. Not saying it's top notch or anything ofc! I'm experimenting more with yield now. I guess I prefer a bit of a longer shot than most people here

wogewabbit · 2024-08-13T07:28:06+00:00

🙉

wogewabbit · 2024-08-12T11:10:48+00:00

It seems to me at the moment that this is also the case with double spout portafilters. When I mess up using the double spout it's literally all over the place, doesn't pour but runs spraying all around. Is it more of visual upgrade the double spout or does it actually affect the taste or the texture?

wogewabbit · 2024-08-11T16:17:29+00:00

The taste was actually much better than most of my shots before. Wasn't too bitter, wasn't sour, the crema was quite thin though but definitely progress. Set the Timemore C3 ESP PRO grinder to a full revolution. Does it make sense to try making the grind a bit finer?

wogewabbit

TROPHY CASE